| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Avoid accessing uninitialized arvif->ar during beacon miss
During beacon miss handling, ath12k driver iterates over active virtual
interfaces (vifs) and attempts to access the radio object (ar) via
arvif->deflink->ar.
However, after commit aa80f12f3bed ("wifi: ath12k: defer vdev creation for
MLO"), arvif is linked to a radio only after vdev creation, typically when
a channel is assigned or a scan is requested.
For P2P capable devices, a default P2P interface is created by
wpa_supplicant along with regular station interfaces, these serve as dummy
interfaces for P2P-capable stations, lack an associated netdev and initiate
frequent scans to discover neighbor p2p devices. When a scan is initiated
on such P2P vifs, driver selects destination radio (ar) based on scan
frequency, creates a scan vdev, and attaches arvif to the radio. Once the
scan completes or is aborted, the scan vdev is deleted, detaching arvif
from the radio and leaving arvif->ar uninitialized.
While handling beacon miss for station interfaces, P2P interface is also
encountered in the vif iteration and ath12k_mac_handle_beacon_miss_iter()
tries to dereference the uninitialized arvif->deflink->ar.
Fix this by verifying that vdev is created for the arvif before accessing
its ar during beacon miss handling and similar vif iterator callbacks.
==========================================================================
wlp6s0: detected beacon loss from AP (missed 7 beacons) - probing
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 5 UID: 0 PID: 0 Comm: swapper/5 Not tainted 6.16.0-rc1-wt-ath+ #2 PREEMPT(full)
RIP: 0010:ath12k_mac_handle_beacon_miss_iter+0xb5/0x1a0 [ath12k]
Call Trace:
__iterate_interfaces+0x11a/0x410 [mac80211]
ieee80211_iterate_active_interfaces_atomic+0x61/0x140 [mac80211]
ath12k_mac_handle_beacon_miss+0xa1/0xf0 [ath12k]
ath12k_roam_event+0x393/0x560 [ath12k]
ath12k_wmi_op_rx+0x1486/0x28c0 [ath12k]
ath12k_htc_process_trailer.isra.0+0x2fb/0x620 [ath12k]
ath12k_htc_rx_completion_handler+0x448/0x830 [ath12k]
ath12k_ce_recv_process_cb+0x549/0x9e0 [ath12k]
ath12k_ce_per_engine_service+0xbe/0xf0 [ath12k]
ath12k_pci_ce_workqueue+0x69/0x120 [ath12k]
process_one_work+0xe3a/0x1430
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Pass ab pointer directly to ath12k_dp_tx_get_encap_type()
In ath12k_dp_tx_get_encap_type(), the arvif parameter is only used to
retrieve the ab pointer. In vdev delete sequence the arvif->ar could
become NULL and that would trigger kernel panic.
Since the caller ath12k_dp_tx() already has a valid ab pointer, pass it
directly to avoid panic and unnecessary dereferencing.
PC points to "ath12k_dp_tx+0x228/0x988 [ath12k]"
LR points to "ath12k_dp_tx+0xc8/0x988 [ath12k]".
The Backtrace obtained is as follows:
ath12k_dp_tx+0x228/0x988 [ath12k]
ath12k_mac_tx_check_max_limit+0x608/0x920 [ath12k]
ieee80211_process_measurement_req+0x320/0x348 [mac80211]
ieee80211_tx_dequeue+0x9ac/0x1518 [mac80211]
ieee80211_tx_dequeue+0xb14/0x1518 [mac80211]
ieee80211_tx_prepare_skb+0x224/0x254 [mac80211]
ieee80211_xmit+0xec/0x100 [mac80211]
__ieee80211_subif_start_xmit+0xc50/0xf40 [mac80211]
ieee80211_subif_start_xmit+0x2e8/0x308 [mac80211]
netdev_start_xmit+0x150/0x18c
dev_hard_start_xmit+0x74/0xc0
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
iwlwifi: Add missing check for alloc_ordered_workqueue
Add check for the return value of alloc_ordered_workqueue since it may
return NULL pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: prevent infinite loop in rt6_nlmsg_size()
While testing prior patch, I was able to trigger
an infinite loop in rt6_nlmsg_size() in the following place:
list_for_each_entry_rcu(sibling, &f6i->fib6_siblings,
fib6_siblings) {
rt6_nh_nlmsg_size(sibling->fib6_nh, &nexthop_len);
}
This is because fib6_del_route() and fib6_add_rt2node()
uses list_del_rcu(), which can confuse rcu readers,
because they might no longer see the head of the list.
Restart the loop if f6i->fib6_nsiblings is zero. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix possible infinite loop in fib6_info_uses_dev()
fib6_info_uses_dev() seems to rely on RCU without an explicit
protection.
Like the prior fix in rt6_nlmsg_size(),
we need to make sure fib6_del_route() or fib6_add_rt2node()
have not removed the anchor from the list, or we risk an infinite loop. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Fix crash when rebind ccp device for ccp.ko
When CONFIG_CRYPTO_DEV_CCP_DEBUGFS is enabled, rebinding
the ccp device causes the following crash:
$ echo '0000:0a:00.2' > /sys/bus/pci/drivers/ccp/unbind
$ echo '0000:0a:00.2' > /sys/bus/pci/drivers/ccp/bind
[ 204.976930] BUG: kernel NULL pointer dereference, address: 0000000000000098
[ 204.978026] #PF: supervisor write access in kernel mode
[ 204.979126] #PF: error_code(0x0002) - not-present page
[ 204.980226] PGD 0 P4D 0
[ 204.981317] Oops: Oops: 0002 [#1] SMP NOPTI
...
[ 204.997852] Call Trace:
[ 204.999074] <TASK>
[ 205.000297] start_creating+0x9f/0x1c0
[ 205.001533] debugfs_create_dir+0x1f/0x170
[ 205.002769] ? srso_return_thunk+0x5/0x5f
[ 205.004000] ccp5_debugfs_setup+0x87/0x170 [ccp]
[ 205.005241] ccp5_init+0x8b2/0x960 [ccp]
[ 205.006469] ccp_dev_init+0xd4/0x150 [ccp]
[ 205.007709] sp_init+0x5f/0x80 [ccp]
[ 205.008942] sp_pci_probe+0x283/0x2e0 [ccp]
[ 205.010165] ? srso_return_thunk+0x5/0x5f
[ 205.011376] local_pci_probe+0x4f/0xb0
[ 205.012584] pci_device_probe+0xdb/0x230
[ 205.013810] really_probe+0xed/0x380
[ 205.015024] __driver_probe_device+0x7e/0x160
[ 205.016240] device_driver_attach+0x2f/0x60
[ 205.017457] bind_store+0x7c/0xb0
[ 205.018663] drv_attr_store+0x28/0x40
[ 205.019868] sysfs_kf_write+0x5f/0x70
[ 205.021065] kernfs_fop_write_iter+0x145/0x1d0
[ 205.022267] vfs_write+0x308/0x440
[ 205.023453] ksys_write+0x6d/0xe0
[ 205.024616] __x64_sys_write+0x1e/0x30
[ 205.025778] x64_sys_call+0x16ba/0x2150
[ 205.026942] do_syscall_64+0x56/0x1e0
[ 205.028108] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 205.029276] RIP: 0033:0x7fbc36f10104
[ 205.030420] Code: 89 02 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 8d 05 e1 08 2e 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 f3 c3 66 90 41 54 55 49 89 d4 53 48 89 f5
This patch sets ccp_debugfs_dir to NULL after destroying it in
ccp5_debugfs_destroy, allowing the directory dentry to be
recreated when rebinding the ccp device.
Tested on AMD Ryzen 7 1700X. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/eeh: Make EEH driver device hotplug safe
Multiple race conditions existed between the PCIe hotplug driver and the
EEH driver, leading to a variety of kernel oopses of the same general
nature:
<pcie device unplug>
<eeh driver trigger>
<hotplug removal trigger>
<pcie tree reconfiguration>
<eeh recovery next step>
<oops in EEH driver bus iteration loop>
A second class of oops is also seen when the underlying bus disappears
during device recovery.
Refactor the EEH module to be PCI rescan and remove safe. Also clean
up a few minor formatting / readability issues. |
| In the Linux kernel, the following vulnerability has been resolved:
benet: fix BUG when creating VFs
benet crashes as soon as SRIOV VFs are created:
kernel BUG at mm/vmalloc.c:3457!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 4 UID: 0 PID: 7408 Comm: test.sh Kdump: loaded Not tainted 6.16.0+ #1 PREEMPT(voluntary)
[...]
RIP: 0010:vunmap+0x5f/0x70
[...]
Call Trace:
<TASK>
__iommu_dma_free+0xe8/0x1c0
be_cmd_set_mac_list+0x3fe/0x640 [be2net]
be_cmd_set_mac+0xaf/0x110 [be2net]
be_vf_eth_addr_config+0x19f/0x330 [be2net]
be_vf_setup+0x4f7/0x990 [be2net]
be_pci_sriov_configure+0x3a1/0x470 [be2net]
sriov_numvfs_store+0x20b/0x380
kernfs_fop_write_iter+0x354/0x530
vfs_write+0x9b9/0xf60
ksys_write+0xf3/0x1d0
do_syscall_64+0x8c/0x3d0
be_cmd_set_mac_list() calls dma_free_coherent() under a spin_lock_bh.
Fix it by freeing only after the lock has been released. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Exit early on perf_mmap() fail
When perf_mmap() fails to allocate a buffer, it still invokes the
event_mapped() callback of the related event. On X86 this might increase
the perf_rdpmc_allowed reference counter. But nothing undoes this as
perf_mmap_close() is never called in this case, which causes another
reference count leak.
Return early on failure to prevent that. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Prevent VMA split of buffer mappings
The perf mmap code is careful about mmap()'ing the user page with the
ringbuffer and additionally the auxiliary buffer, when the event supports
it. Once the first mapping is established, subsequent mapping have to use
the same offset and the same size in both cases. The reference counting for
the ringbuffer and the auxiliary buffer depends on this being correct.
Though perf does not prevent that a related mapping is split via mmap(2),
munmap(2) or mremap(2). A split of a VMA results in perf_mmap_open() calls,
which take reference counts, but then the subsequent perf_mmap_close()
calls are not longer fulfilling the offset and size checks. This leads to
reference count leaks.
As perf already has the requirement for subsequent mappings to match the
initial mapping, the obvious consequence is that VMA splits, caused by
resizing of a mapping or partial unmapping, have to be prevented.
Implement the vm_operations_struct::may_split() callback and return
unconditionally -EINVAL.
That ensures that the mapping offsets and sizes cannot be changed after the
fact. Remapping to a different fixed address with the same size is still
possible as it takes the references for the new mapping and drops those of
the old mapping. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86/intel/pmt: fix a crashlog NULL pointer access
Usage of the intel_pmt_read() for binary sysfs, requires a pcidev. The
current use of the endpoint value is only valid for telemetry endpoint
usage.
Without the ep, the crashlog usage causes the following NULL pointer
exception:
BUG: kernel NULL pointer dereference, address: 0000000000000000
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:intel_pmt_read+0x3b/0x70 [pmt_class]
Code:
Call Trace:
<TASK>
? sysfs_kf_bin_read+0xc0/0xe0
kernfs_fop_read_iter+0xac/0x1a0
vfs_read+0x26d/0x350
ksys_read+0x6b/0xe0
__x64_sys_read+0x1d/0x30
x64_sys_call+0x1bc8/0x1d70
do_syscall_64+0x6d/0x110
Augment struct intel_pmt_entry with a pointer to the pcidev to avoid
the NULL pointer exception. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: apple: validate feature-report field count to prevent NULL pointer dereference
A malicious HID device with quirk APPLE_MAGIC_BACKLIGHT can trigger a NULL
pointer dereference whilst the power feature-report is toggled and sent to
the device in apple_magic_backlight_report_set(). The power feature-report
is expected to have two data fields, but if the descriptor declares one
field then accessing field[1] and dereferencing it in
apple_magic_backlight_report_set() becomes invalid
since field[1] will be NULL.
An example of a minimal descriptor which can cause the crash is something
like the following where the report with ID 3 (power report) only
references a single 1-byte field. When hid core parses the descriptor it
will encounter the final feature tag, allocate a hid_report (all members
of field[] will be zeroed out), create field structure and populate it,
increasing the maxfield to 1. The subsequent field[1] access and
dereference causes the crash.
Usage Page (Vendor Defined 0xFF00)
Usage (0x0F)
Collection (Application)
Report ID (1)
Usage (0x01)
Logical Minimum (0)
Logical Maximum (255)
Report Size (8)
Report Count (1)
Feature (Data,Var,Abs)
Usage (0x02)
Logical Maximum (32767)
Report Size (16)
Report Count (1)
Feature (Data,Var,Abs)
Report ID (3)
Usage (0x03)
Logical Minimum (0)
Logical Maximum (1)
Report Size (8)
Report Count (1)
Feature (Data,Var,Abs)
End Collection
Here we see the KASAN splat when the kernel dereferences the
NULL pointer and crashes:
[ 15.164723] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] SMP KASAN NOPTI
[ 15.165691] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
[ 15.165691] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.15.0 #31 PREEMPT(voluntary)
[ 15.165691] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
[ 15.165691] RIP: 0010:apple_magic_backlight_report_set+0xbf/0x210
[ 15.165691] Call Trace:
[ 15.165691] <TASK>
[ 15.165691] apple_probe+0x571/0xa20
[ 15.165691] hid_device_probe+0x2e2/0x6f0
[ 15.165691] really_probe+0x1ca/0x5c0
[ 15.165691] __driver_probe_device+0x24f/0x310
[ 15.165691] driver_probe_device+0x4a/0xd0
[ 15.165691] __device_attach_driver+0x169/0x220
[ 15.165691] bus_for_each_drv+0x118/0x1b0
[ 15.165691] __device_attach+0x1d5/0x380
[ 15.165691] device_initial_probe+0x12/0x20
[ 15.165691] bus_probe_device+0x13d/0x180
[ 15.165691] device_add+0xd87/0x1510
[...]
To fix this issue we should validate the number of fields that the
backlight and power reports have and if they do not have the required
number of fields then bail. |
| In the Linux kernel, the following vulnerability has been resolved:
atm: clip: Fix memory leak of struct clip_vcc.
ioctl(ATMARP_MKIP) allocates struct clip_vcc and set it to
vcc->user_back.
The code assumes that vcc_destroy_socket() passes NULL skb
to vcc->push() when the socket is close()d, and then clip_push()
frees clip_vcc.
However, ioctl(ATMARPD_CTRL) sets NULL to vcc->push() in
atm_init_atmarp(), resulting in memory leak.
Let's serialise two ioctl() by lock_sock() and check vcc->push()
in atm_init_atmarp() to prevent memleak. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix bug due to prealloc collision
When userspace is using AF_RXRPC to provide a server, it has to preallocate
incoming calls and assign to them call IDs that will be used to thread
related recvmsg() and sendmsg() together. The preallocated call IDs will
automatically be attached to calls as they come in until the pool is empty.
To the kernel, the call IDs are just arbitrary numbers, but userspace can
use the call ID to hold a pointer to prepared structs. In any case, the
user isn't permitted to create two calls with the same call ID (call IDs
become available again when the call ends) and EBADSLT should result from
sendmsg() if an attempt is made to preallocate a call with an in-use call
ID.
However, the cleanup in the error handling will trigger both assertions in
rxrpc_cleanup_call() because the call isn't marked complete and isn't
marked as having been released.
Fix this by setting the call state in rxrpc_service_prealloc_one() and then
marking it as being released before calling the cleanup function. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/tegra: nvdec: Fix dma_alloc_coherent error check
Check for NULL return value with dma_alloc_coherent, in line with
Robin's fix for vic.c in 'drm/tegra: vic: Fix DMA API misuse'. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: quirks: Add quirk for 2 Chicony Electronics HP 5MP Cameras
The Chicony Electronics HP 5MP Cameras (USB ID 04F2:B824 & 04F2:B82C)
report a HID sensor interface that is not actually implemented.
Attempting to access this non-functional sensor via iio_info causes
system hangs as runtime PM tries to wake up an unresponsive sensor.
Add these 2 devices to the HID ignore list since the sensor interface is
non-functional by design and should not be exposed to userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: Don't register LEDs for genphy
If a PHY has no driver, the genphy driver is probed/removed directly in
phy_attach/detach. If the PHY's ofnode has an "leds" subnode, then the
LEDs will be (un)registered when probing/removing the genphy driver.
This could occur if the leds are for a non-generic driver that isn't
loaded for whatever reason. Synchronously removing the PHY device in
phy_detach leads to the following deadlock:
rtnl_lock()
ndo_close()
...
phy_detach()
phy_remove()
phy_leds_unregister()
led_classdev_unregister()
led_trigger_set()
netdev_trigger_deactivate()
unregister_netdevice_notifier()
rtnl_lock()
There is a corresponding deadlock on the open/register side of things
(and that one is reported by lockdep), but it requires a race while this
one is deterministic.
Generic PHYs do not support LEDs anyway, so don't bother registering
them. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: tegra: xusb: Fix unbalanced regulator disable in UTMI PHY mode
When transitioning from USB_ROLE_DEVICE to USB_ROLE_NONE, the code
assumed that the regulator should be disabled. However, if the regulator
is marked as always-on, regulator_is_enabled() continues to return true,
leading to an incorrect attempt to disable a regulator which is not
enabled.
This can result in warnings such as:
[ 250.155624] WARNING: CPU: 1 PID: 7326 at drivers/regulator/core.c:3004
_regulator_disable+0xe4/0x1a0
[ 250.155652] unbalanced disables for VIN_SYS_5V0
To fix this, we move the regulator control logic into
tegra186_xusb_padctl_id_override() function since it's directly related
to the ID override state. The regulator is now only disabled when the role
transitions from USB_ROLE_HOST to USB_ROLE_NONE, by checking the VBUS_ID
register. This ensures that regulator enable/disable operations are
properly balanced and only occur when actually transitioning to/from host
mode. |
| A path traversal vulnerability was found in spice-vdagent. This flaw allows a malicious or compromised SPICE host to write arbitrary files to any location on the guest operating system. This occurs because the filename provided by the SPICE host during file transfers is not properly sanitized before being used. An attacker could exploit this to write to sensitive locations with the privileges of the spice-vdagent process, typically the logged-in user. This issue requires the SPICE host to be untrusted or compromised for exploitation. |
| A flaw was found in spice-vdagent. A malicious or compromised SPICE host can trigger an integer overflow by sending a specially crafted message. This vulnerability can lead to a heap buffer overflow, causing the spice-vdagent daemon to crash and resulting in a Denial of Service (DoS) for the virtual machine. This issue requires the SPICE host to be untrusted or compromised for exploitation. |
