| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: Fix do_register_framebuffer to prevent null-ptr-deref in fb_videomode_to_var
If fb_add_videomode() in do_register_framebuffer() fails to allocate
memory for fb_videomode, it will later lead to a null-ptr dereference in
fb_videomode_to_var(), as the fb_info is registered while not having the
mode in modelist that is expected to be there, i.e. the one that is
described in fb_info->var.
================================================================
general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 1 PID: 30371 Comm: syz-executor.1 Not tainted 5.10.226-syzkaller #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:fb_videomode_to_var+0x24/0x610 drivers/video/fbdev/core/modedb.c:901
Call Trace:
display_to_var+0x3a/0x7c0 drivers/video/fbdev/core/fbcon.c:929
fbcon_resize+0x3e2/0x8f0 drivers/video/fbdev/core/fbcon.c:2071
resize_screen drivers/tty/vt/vt.c:1176 [inline]
vc_do_resize+0x53a/0x1170 drivers/tty/vt/vt.c:1263
fbcon_modechanged+0x3ac/0x6e0 drivers/video/fbdev/core/fbcon.c:2720
fbcon_update_vcs+0x43/0x60 drivers/video/fbdev/core/fbcon.c:2776
do_fb_ioctl+0x6d2/0x740 drivers/video/fbdev/core/fbmem.c:1128
fb_ioctl+0xe7/0x150 drivers/video/fbdev/core/fbmem.c:1203
vfs_ioctl fs/ioctl.c:48 [inline]
__do_sys_ioctl fs/ioctl.c:753 [inline]
__se_sys_ioctl fs/ioctl.c:739 [inline]
__x64_sys_ioctl+0x19a/0x210 fs/ioctl.c:739
do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x67/0xd1
================================================================
Even though fbcon_init() checks beforehand if fb_match_mode() in
var_to_display() fails, it can not prevent the panic because fbcon_init()
does not return error code. Considering this and the comment in the code
about fb_match_mode() returning NULL - "This should not happen" - it is
better to prevent registering the fb_info if its mode was not set
successfully. Also move fb_add_videomode() closer to the beginning of
do_register_framebuffer() to avoid having to do the cleanup on fail.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: Fix fb_set_var to prevent null-ptr-deref in fb_videomode_to_var
If fb_add_videomode() in fb_set_var() fails to allocate memory for
fb_videomode, later it may lead to a null-ptr dereference in
fb_videomode_to_var(), as the fb_info is registered while not having the
mode in modelist that is expected to be there, i.e. the one that is
described in fb_info->var.
================================================================
general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 1 PID: 30371 Comm: syz-executor.1 Not tainted 5.10.226-syzkaller #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:fb_videomode_to_var+0x24/0x610 drivers/video/fbdev/core/modedb.c:901
Call Trace:
display_to_var+0x3a/0x7c0 drivers/video/fbdev/core/fbcon.c:929
fbcon_resize+0x3e2/0x8f0 drivers/video/fbdev/core/fbcon.c:2071
resize_screen drivers/tty/vt/vt.c:1176 [inline]
vc_do_resize+0x53a/0x1170 drivers/tty/vt/vt.c:1263
fbcon_modechanged+0x3ac/0x6e0 drivers/video/fbdev/core/fbcon.c:2720
fbcon_update_vcs+0x43/0x60 drivers/video/fbdev/core/fbcon.c:2776
do_fb_ioctl+0x6d2/0x740 drivers/video/fbdev/core/fbmem.c:1128
fb_ioctl+0xe7/0x150 drivers/video/fbdev/core/fbmem.c:1203
vfs_ioctl fs/ioctl.c:48 [inline]
__do_sys_ioctl fs/ioctl.c:753 [inline]
__se_sys_ioctl fs/ioctl.c:739 [inline]
__x64_sys_ioctl+0x19a/0x210 fs/ioctl.c:739
do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x67/0xd1
================================================================
The reason is that fb_info->var is being modified in fb_set_var(), and
then fb_videomode_to_var() is called. If it fails to add the mode to
fb_info->modelist, fb_set_var() returns error, but does not restore the
old value of fb_info->var. Restore fb_info->var on failure the same way
it is done earlier in the function.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
configfs-tsm-report: Fix NULL dereference of tsm_ops
Unlike sysfs, the lifetime of configfs objects is controlled by
userspace. There is no mechanism for the kernel to find and delete all
created config-items. Instead, the configfs-tsm-report mechanism has an
expectation that tsm_unregister() can happen at any time and cause
established config-item access to start failing.
That expectation is not fully satisfied. While tsm_report_read(),
tsm_report_{is,is_bin}_visible(), and tsm_report_make_item() safely fail
if tsm_ops have been unregistered, tsm_report_privlevel_store()
tsm_report_provider_show() fail to check for ops registration. Add the
missing checks for tsm_ops having been removed.
Now, in supporting the ability for tsm_unregister() to always succeed,
it leaves the problem of what to do with lingering config-items. The
expectation is that the admin that arranges for the ->remove() (unbind)
of the ${tsm_arch}-guest driver is also responsible for deletion of all
open config-items. Until that deletion happens, ->probe() (reload /
bind) of the ${tsm_arch}-guest driver fails.
This allows for emergency shutdown / revocation of attestation
interfaces, and requires coordinated restart. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: add NULL check in automount_fullpath
page is checked for null in __build_path_from_dentry_optional_prefix
when tcon->origin_fullpath is not set. However, the check is missing when
it is set.
Add a check to prevent a potential NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check rcu_read_lock_trace_held() in bpf_map_lookup_percpu_elem()
bpf_map_lookup_percpu_elem() helper is also available for sleepable bpf
program. When BPF JIT is disabled or under 32-bit host,
bpf_map_lookup_percpu_elem() will not be inlined. Using it in a
sleepable bpf program will trigger the warning in
bpf_map_lookup_percpu_elem(), because the bpf program only holds
rcu_read_lock_trace lock. Therefore, add the missed check. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_set_pipapo: clamp maximum map bucket size to INT_MAX
Otherwise, it is possible to hit WARN_ON_ONCE in __kvmalloc_node_noprof()
when resizing hashtable because __GFP_NOWARN is unset.
Similar to:
b541ba7d1f5a ("netfilter: conntrack: clamp maximum hashtable size to INT_MAX") |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Fix memory leak due to multiple rx_stats allocation
rx_stats for each arsta is allocated when adding a station.
arsta->rx_stats will be freed when a station is removed.
Redundant allocations are occurring when the same station is added
multiple times. This causes ath12k_mac_station_add() to be called
multiple times, and rx_stats is allocated each time. As a result there
is memory leaks.
Prevent multiple allocations of rx_stats when ath12k_mac_station_add()
is called repeatedly by checking if rx_stats is already allocated
before allocating again. Allocate arsta->rx_stats if arsta->rx_stats
is NULL respectively.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 |
| In the Linux kernel, the following vulnerability has been resolved:
fbcon: Make sure modelist not set on unregistered console
It looks like attempting to write to the "store_modes" sysfs node will
run afoul of unregistered consoles:
UBSAN: array-index-out-of-bounds in drivers/video/fbdev/core/fbcon.c:122:28
index -1 is out of range for type 'fb_info *[32]'
...
fbcon_info_from_console+0x192/0x1a0 drivers/video/fbdev/core/fbcon.c:122
fbcon_new_modelist+0xbf/0x2d0 drivers/video/fbdev/core/fbcon.c:3048
fb_new_modelist+0x328/0x440 drivers/video/fbdev/core/fbmem.c:673
store_modes+0x1c9/0x3e0 drivers/video/fbdev/core/fbsysfs.c:113
dev_attr_store+0x55/0x80 drivers/base/core.c:2439
static struct fb_info *fbcon_registered_fb[FB_MAX];
...
static signed char con2fb_map[MAX_NR_CONSOLES];
...
static struct fb_info *fbcon_info_from_console(int console)
...
return fbcon_registered_fb[con2fb_map[console]];
If con2fb_map contains a -1 things go wrong here. Instead, return NULL,
as callers of fbcon_info_from_console() are trying to compare against
existing "info" pointers, so error handling should kick in correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
atm: Revert atm_account_tx() if copy_from_iter_full() fails.
In vcc_sendmsg(), we account skb->truesize to sk->sk_wmem_alloc by
atm_account_tx().
It is expected to be reverted by atm_pop_raw() later called by
vcc->dev->ops->send(vcc, skb).
However, vcc_sendmsg() misses the same revert when copy_from_iter_full()
fails, and then we will leak a socket.
Let's factorise the revert part as atm_return_tx() and call it in
the failure path.
Note that the corresponding sk_wmem_alloc operation can be found in
alloc_tx() as of the blamed commit.
$ git blame -L:alloc_tx net/atm/common.c c55fa3cccbc2c~ |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Fix double invocation of bnxt_ulp_stop()/bnxt_ulp_start()
Before the commit under the Fixes tag below, bnxt_ulp_stop() and
bnxt_ulp_start() were always invoked in pairs. After that commit,
the new bnxt_ulp_restart() can be invoked after bnxt_ulp_stop()
has been called. This may result in the RoCE driver's aux driver
.suspend() method being invoked twice. The 2nd bnxt_re_suspend()
call will crash when it dereferences a NULL pointer:
(NULL ib_device): Handle device suspend call
BUG: kernel NULL pointer dereference, address: 0000000000000b78
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP PTI
CPU: 20 UID: 0 PID: 181 Comm: kworker/u96:5 Tainted: G S 6.15.0-rc1 #4 PREEMPT(voluntary)
Tainted: [S]=CPU_OUT_OF_SPEC
Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017
Workqueue: bnxt_pf_wq bnxt_sp_task [bnxt_en]
RIP: 0010:bnxt_re_suspend+0x45/0x1f0 [bnxt_re]
Code: 8b 05 a7 3c 5b f5 48 89 44 24 18 31 c0 49 8b 5c 24 08 4d 8b 2c 24 e8 ea 06 0a f4 48 c7 c6 04 60 52 c0 48 89 df e8 1b ce f9 ff <48> 8b 83 78 0b 00 00 48 8b 80 38 03 00 00 a8 40 0f 85 b5 00 00 00
RSP: 0018:ffffa2e84084fd88 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000001
RDX: 0000000000000000 RSI: ffffffffb4b6b934 RDI: 00000000ffffffff
RBP: ffffa1760954c9c0 R08: 0000000000000000 R09: c0000000ffffdfff
R10: 0000000000000001 R11: ffffa2e84084fb50 R12: ffffa176031ef070
R13: ffffa17609775000 R14: ffffa17603adc180 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffffa17daa397000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000b78 CR3: 00000004aaa30003 CR4: 00000000003706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
bnxt_ulp_stop+0x69/0x90 [bnxt_en]
bnxt_sp_task+0x678/0x920 [bnxt_en]
? __schedule+0x514/0xf50
process_scheduled_works+0x9d/0x400
worker_thread+0x11c/0x260
? __pfx_worker_thread+0x10/0x10
kthread+0xfe/0x1e0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2b/0x40
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
Check the BNXT_EN_FLAG_ULP_STOPPED flag and do not proceed if the flag
is already set. This will preserve the original symmetrical
bnxt_ulp_stop() and bnxt_ulp_start().
Also, inside bnxt_ulp_start(), clear the BNXT_EN_FLAG_ULP_STOPPED
flag after taking the mutex to avoid any race condition. And for
symmetry, only proceed in bnxt_ulp_start() if the
BNXT_EN_FLAG_ULP_STOPPED is set. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/fpsimd: Discard stale CPU state when handling SME traps
The logic for handling SME traps manipulates saved FPSIMD/SVE/SME state
incorrectly, and a race with preemption can result in a task having
TIF_SME set and TIF_FOREIGN_FPSTATE clear even though the live CPU state
is stale (e.g. with SME traps enabled). This can result in warnings from
do_sme_acc() where SME traps are not expected while TIF_SME is set:
| /* With TIF_SME userspace shouldn't generate any traps */
| if (test_and_set_thread_flag(TIF_SME))
| WARN_ON(1);
This is very similar to the SVE issue we fixed in commit:
751ecf6afd6568ad ("arm64/sve: Discard stale CPU state when handling SVE traps")
The race can occur when the SME trap handler is preempted before and
after manipulating the saved FPSIMD/SVE/SME state, starting and ending on
the same CPU, e.g.
| void do_sme_acc(unsigned long esr, struct pt_regs *regs)
| {
| // Trap on CPU 0 with TIF_SME clear, SME traps enabled
| // task->fpsimd_cpu is 0.
| // per_cpu_ptr(&fpsimd_last_state, 0) is task.
|
| ...
|
| // Preempted; migrated from CPU 0 to CPU 1.
| // TIF_FOREIGN_FPSTATE is set.
|
| get_cpu_fpsimd_context();
|
| /* With TIF_SME userspace shouldn't generate any traps */
| if (test_and_set_thread_flag(TIF_SME))
| WARN_ON(1);
|
| if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) {
| unsigned long vq_minus_one =
| sve_vq_from_vl(task_get_sme_vl(current)) - 1;
| sme_set_vq(vq_minus_one);
|
| fpsimd_bind_task_to_cpu();
| }
|
| put_cpu_fpsimd_context();
|
| // Preempted; migrated from CPU 1 to CPU 0.
| // task->fpsimd_cpu is still 0
| // If per_cpu_ptr(&fpsimd_last_state, 0) is still task then:
| // - Stale HW state is reused (with SME traps enabled)
| // - TIF_FOREIGN_FPSTATE is cleared
| // - A return to userspace skips HW state restore
| }
Fix the case where the state is not live and TIF_FOREIGN_FPSTATE is set
by calling fpsimd_flush_task_state() to detach from the saved CPU
state. This ensures that a subsequent context switch will not reuse the
stale CPU state, and will instead set TIF_FOREIGN_FPSTATE, forcing the
new state to be reloaded from memory prior to a return to userspace.
Note: this was originallly posted as [1].
[ Rutland: rewrite commit message ] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: fix the 'para' buffer size to avoid reading out of bounds
Set the size to 6 instead of 2, since 'para' array is passed to
'rtw_fw_bt_wifi_control(rtwdev, para[0], ¶[1])', which reads
5 bytes:
void rtw_fw_bt_wifi_control(struct rtw_dev *rtwdev, u8 op_code, u8 *data)
{
...
SET_BT_WIFI_CONTROL_DATA1(h2c_pkt, *data);
SET_BT_WIFI_CONTROL_DATA2(h2c_pkt, *(data + 1));
...
SET_BT_WIFI_CONTROL_DATA5(h2c_pkt, *(data + 4));
Detected using the static analysis tool - Svace. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k_htc: Abort software beacon handling if disabled
A malicious USB device can send a WMI_SWBA_EVENTID event from an
ath9k_htc-managed device before beaconing has been enabled. This causes
a device-by-zero error in the driver, leading to either a crash or an
out of bounds read.
Prevent this by aborting the handling in ath9k_htc_swba() if beacons are
not enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: clear phydev->devlink when the link is deleted
There is a potential crash issue when disabling and re-enabling the
network port. When disabling the network port, phy_detach() calls
device_link_del() to remove the device link, but it does not clear
phydev->devlink, so phydev->devlink is not a NULL pointer. Then the
network port is re-enabled, but if phy_attach_direct() fails before
calling device_link_add(), the code jumps to the "error" label and
calls phy_detach(). Since phydev->devlink retains the old value from
the previous attach/detach cycle, device_link_del() uses the old value,
which accesses a NULL pointer and causes a crash. The simplified crash
log is as follows.
[ 24.702421] Call trace:
[ 24.704856] device_link_put_kref+0x20/0x120
[ 24.709124] device_link_del+0x30/0x48
[ 24.712864] phy_detach+0x24/0x168
[ 24.716261] phy_attach_direct+0x168/0x3a4
[ 24.720352] phylink_fwnode_phy_connect+0xc8/0x14c
[ 24.725140] phylink_of_phy_connect+0x1c/0x34
Therefore, phydev->devlink needs to be cleared when the device link is
deleted. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: mscc: Fix memory leak when using one step timestamping
Fix memory leak when running one-step timestamping. When running
one-step sync timestamping, the HW is configured to insert the TX time
into the frame, so there is no reason to keep the skb anymore. As in
this case the HW will never generate an interrupt to say that the frame
was timestamped, then the frame will never released.
Fix this by freeing the frame in case of one-step timestamping. |
| In the Linux kernel, the following vulnerability has been resolved:
calipso: Don't call calipso functions for AF_INET sk.
syzkaller reported a null-ptr-deref in txopt_get(). [0]
The offset 0x70 was of struct ipv6_txoptions in struct ipv6_pinfo,
so struct ipv6_pinfo was NULL there.
However, this never happens for IPv6 sockets as inet_sk(sk)->pinet6
is always set in inet6_create(), meaning the socket was not IPv6 one.
The root cause is missing validation in netlbl_conn_setattr().
netlbl_conn_setattr() switches branches based on struct
sockaddr.sa_family, which is passed from userspace. However,
netlbl_conn_setattr() does not check if the address family matches
the socket.
The syzkaller must have called connect() for an IPv6 address on
an IPv4 socket.
We have a proper validation in tcp_v[46]_connect(), but
security_socket_connect() is called in the earlier stage.
Let's copy the validation to netlbl_conn_setattr().
[0]:
Oops: general protection fault, probably for non-canonical address 0xdffffc000000000e: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077]
CPU: 2 UID: 0 PID: 12928 Comm: syz.9.1677 Not tainted 6.12.0 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:txopt_get include/net/ipv6.h:390 [inline]
RIP: 0010:
Code: 02 00 00 49 8b ac 24 f8 02 00 00 e8 84 69 2a fd e8 ff 00 16 fd 48 8d 7d 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 53 02 00 00 48 8b 6d 70 48 85 ed 0f 84 ab 01 00
RSP: 0018:ffff88811b8afc48 EFLAGS: 00010212
RAX: dffffc0000000000 RBX: 1ffff11023715f8a RCX: ffffffff841ab00c
RDX: 000000000000000e RSI: ffffc90007d9e000 RDI: 0000000000000070
RBP: 0000000000000000 R08: ffffed1023715f9d R09: ffffed1023715f9e
R10: ffffed1023715f9d R11: 0000000000000003 R12: ffff888123075f00
R13: ffff88810245bd80 R14: ffff888113646780 R15: ffff888100578a80
FS: 00007f9019bd7640(0000) GS:ffff8882d2d00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f901b927bac CR3: 0000000104788003 CR4: 0000000000770ef0
PKRU: 80000000
Call Trace:
<TASK>
calipso_sock_setattr+0x56/0x80 net/netlabel/netlabel_calipso.c:557
netlbl_conn_setattr+0x10c/0x280 net/netlabel/netlabel_kapi.c:1177
selinux_netlbl_socket_connect_helper+0xd3/0x1b0 security/selinux/netlabel.c:569
selinux_netlbl_socket_connect_locked security/selinux/netlabel.c:597 [inline]
selinux_netlbl_socket_connect+0xb6/0x100 security/selinux/netlabel.c:615
selinux_socket_connect+0x5f/0x80 security/selinux/hooks.c:4931
security_socket_connect+0x50/0xa0 security/security.c:4598
__sys_connect_file+0xa4/0x190 net/socket.c:2067
__sys_connect+0x12c/0x170 net/socket.c:2088
__do_sys_connect net/socket.c:2098 [inline]
__se_sys_connect net/socket.c:2095 [inline]
__x64_sys_connect+0x73/0xb0 net/socket.c:2095
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xaa/0x1b0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f901b61a12d
Code: 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f9019bd6fa8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 00007f901b925fa0 RCX: 00007f901b61a12d
RDX: 000000000000001c RSI: 0000200000000140 RDI: 0000000000000003
RBP: 00007f901b701505 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007f901b5b62a0 R15: 00007f9019bb7000
</TASK>
Modules linked in: |
| In the Linux kernel, the following vulnerability has been resolved:
dm: limit swapping tables for devices with zone write plugs
dm_revalidate_zones() only allowed new or previously unzoned devices to
call blk_revalidate_disk_zones(). If the device was already zoned,
disk->nr_zones would always equal md->nr_zones, so dm_revalidate_zones()
returned without doing any work. This would make the zoned settings for
the device not match the new table. If the device had zone write plug
resources, it could run into errors like bdev_zone_is_seq() reading
invalid memory because disk->conv_zones_bitmap was the wrong size.
If the device doesn't have any zone write plug resources, calling
blk_revalidate_disk_zones() will always correctly update device. If
blk_revalidate_disk_zones() fails, it can still overwrite or clear the
current disk->nr_zones value. In this case, DM must restore the previous
value of disk->nr_zones, so that the zoned settings will continue to
match the previous value that it fell back to.
If the device already has zone write plug resources,
blk_revalidate_disk_zones() will not correctly update them, if it is
called for arbitrary zoned device changes. Since there is not much need
for this ability, the easiest solution is to disallow any table reloads
that change the zoned settings, for devices that already have zone plug
resources. Specifically, if a device already has zone plug resources
allocated, it can only switch to another zoned table that also emulates
zone append. Also, it cannot change the device size or the zone size. A
device can switch to an error target. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: acpi: Prevent null pointer dereference in usb_acpi_add_usb4_devlink()
As demonstrated by the fix for update_port_device_state,
commit 12783c0b9e2c ("usb: core: Prevent null pointer dereference in update_port_device_state"),
usb_hub_to_struct_hub() can return NULL in certain scenarios,
such as during hub driver unbind or teardown race conditions,
even if the underlying usb_device structure exists.
Plus, all other places that call usb_hub_to_struct_hub() in the same file
do check for NULL return values.
If usb_hub_to_struct_hub() returns NULL, the subsequent access to
hub->ports[udev->portnum - 1] will cause a null pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: reject malformed HCI_CMD_SYNC commands
In 'mgmt_hci_cmd_sync()', check whether the size of parameters passed
in 'struct mgmt_cp_hci_cmd_sync' matches the total size of the data
(i.e. 'sizeof(struct mgmt_cp_hci_cmd_sync)' plus trailing bytes).
Otherwise, large invalid 'params_len' will cause 'hci_cmd_sync_alloc()'
to do 'skb_put_data()' from an area beyond the one actually passed to
'mgmt_hci_cmd_sync()'. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: make sure that ptp_rate is not 0 before configuring timestamping
The stmmac platform drivers that do not open-code the clk_ptp_rate value
after having retrieved the default one from the device-tree can end up
with 0 in clk_ptp_rate (as clk_get_rate can return 0). It will
eventually propagate up to PTP initialization when bringing up the
interface, leading to a divide by 0:
Division by zero in kernel.
CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.30-00001-g48313bd5768a #22
Hardware name: STM32 (Device Tree Support)
Call trace:
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x6c/0x8c
dump_stack_lvl from Ldiv0_64+0x8/0x18
Ldiv0_64 from stmmac_init_tstamp_counter+0x190/0x1a4
stmmac_init_tstamp_counter from stmmac_hw_setup+0xc1c/0x111c
stmmac_hw_setup from __stmmac_open+0x18c/0x434
__stmmac_open from stmmac_open+0x3c/0xbc
stmmac_open from __dev_open+0xf4/0x1ac
__dev_open from __dev_change_flags+0x1cc/0x224
__dev_change_flags from dev_change_flags+0x24/0x60
dev_change_flags from ip_auto_config+0x2e8/0x11a0
ip_auto_config from do_one_initcall+0x84/0x33c
do_one_initcall from kernel_init_freeable+0x1b8/0x214
kernel_init_freeable from kernel_init+0x24/0x140
kernel_init from ret_from_fork+0x14/0x28
Exception stack(0xe0815fb0 to 0xe0815ff8)
Prevent this division by 0 by adding an explicit check and error log
about the actual issue. While at it, remove the same check from
stmmac_ptp_register, which then becomes duplicate |
