Export limit exceeded: 419571 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (54328 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98021 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: reject oversized tx_queue_len at netlink parse time rtnl_create_link() assigns IFLA_TXQLEN directly to dev->tx_queue_len without going through netif_change_tx_queue_len(), so a device created with "ip link add ... txqueuelen 500000" bypasses the S16_MAX cap and still triggers the oversized ring allocations in pfifo_fast, tun and tap. The veth peer nest (rtnl_nla_parse_ifinfomsg()) and the RTM_NEWLINK-on-existing-device path reach the same sinks. Enforce the cap in ifla_policy instead: IFLA_TXQLEN becomes NLA_POLICY_FULL_RANGE(NLA_U32, &txqlen_range) with txqlen_range = { .min = 0, .max = S16_MAX }. All netlink consumers parse against this policy - rtnl_setlink(), rtnl_newlink() (create and change), and the veth peer nest - so every netlink path is capped at parse time and rejects the attribute with -ERANGE plus a proper "integer out of range" extack message before any device state is modified (the RTM_SETLINK half-application wart is gone with it). Document the bound in the rt-link.yaml netlink spec. Conditions to recreate the bug: - CONFIG_NET_SCHED=y, CONFIG_VETH=y, CONFIG_USER_NS=y, CONFIG_NET_NS=y. - Unprivileged user in a fresh user+net namespace (unshare -Urn): ip link add v0 txqueuelen 500000 type veth peer name v1 -> on the fixed kernel this is rejected with -ERANGE ("integer out of range" extack) instead of installing an oversized tx_queue_len that later inflates pfifo_fast/tun/tap ring allocations. - ip link set v0 txqueuelen 500000 is likewise rejected at parse time. | ||||
| CVE-2026-98019 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: mark a NULL call argument precise check_func_arg() allows bpf_register_is_null() for nullable arguments w/o marking the underlying scalar register precise. Hence a checkpoint created on such a path would prune against arbitrary scalar value. check_helper_call() enforces second parameter of the bpf_get_local_storage() to be zero, w/o marking the underlying scalar register precise. Hence a checkpoint created on such a path would prune against arbitrary scalar value. Grouping these two into one patch, as they share the same fixes tag. | ||||
| CVE-2026-97915 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Limit firmware log name prints to field size The name in struct vpu_tracing_buffer_header is a fixed-size array populated by the NPU firmware. It is expected to be NUL-terminated, but nothing on the host side enforces this, so printing it with an unbounded string conversion would read past the field if the terminator is ever missing and expose adjacent bytes of the shared tracing BO through dmesg and the debugfs FW log output. Print at most as many characters as the name field holds, so the output never runs past it even if the string is not NUL-terminated. | ||||
| CVE-2026-97906 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bootconfig: Fix integer overflow in initrd size check Sashiko reported that in get_boot_config_from_initrd(), a crafted initrd with a huge bootconfig size (such as 0xFFFFFFFF) can cause the pointer arithmetic: data = ((void *)hdr) - size; to wrap around on 32-bit systems (or when pointer subtraction overflows). Because data wraps around, the subsequent bounds check: if ((unsigned long)data < initrd_start) evaluates to false, bypassing the check. The kernel then calls xbc_calc_checksum(data, size), which attempts to read 4GB of memory, hitting unmapped pages and triggering a fatal kernel page fault during early boot. Furthermore, on 64-bit systems with an initrd > 4.29 GB, an unbounded 32-bit size can similarly bypass the initrd_start check. Fix this by: 1. Ensuring the initrd is at least large enough to contain the bootconfig footer and verifying hdr is within the initrd bounds. 2. Checking that size does not exceed XBC_DATA_MAX and does not exceed the available space between initrd_start and hdr before performing pointer subtraction. | ||||
| CVE-2026-97428 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: harden FRU PIA parsing with bounded helpers Replace the open-coded TLV walk with fru_pia_advance() and fru_pia_copy_field() helpers that bound every read by the actual EEPROM data length, preventing out-of-bounds reads on truncated or malformed FRU data. | ||||
| CVE-2026-97424 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/ras: add ras_suspend callback and use it for cp_ecc_error_irq cp_ecc_error_irq is acquired in amdgpu_gfx_ras_late_init() but released in gfx_v9_0_hw_fini(), so the put site has to query amdgpu_irq_enabled() because the get is skipped on SR-IOV VF. ras_late_init / ras_fini have no suspend counterpart, so move the put to amdgpu_gfx_ras_suspend() / amdgpu_gfx_ras_fini() and add a matching ras_suspend callback that is invoked from amdgpu_ras_suspend() before disable_all_features(). The get and put now sit in the same place and check the same condition (not VF, funcs registered), no refcount querying needed. An active flag gates ras_fini so the suspend-then-unload-without-resume path falls into amdgpu_ras_block_late_fini_default() instead of double-releasing what ras_suspend already cleaned up. Drop the cp_ecc_error_irq put from gfx_v9_0_hw_fini(). gfx_v8_0 manages cp_ecc_error_irq locally and is unaffected; no other GFX generation has this IRQ. | ||||
| CVE-2026-93221 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: convert nfsd_net boolean flags to unsigned long flags word nfsd_net contains several boolean fields that are accessed from concurrent contexts without serialization. In particular, nfsd4_end_grace() guards its drain path with a plain bool: if (nn->grace_ended) return; nn->grace_ended = true; The read and the write are independent, and nothing in struct nfsd_net serializes them. At least two contexts can reach this code with no lock held: laundromat path laundry_wq kworker nfs4_laundromat() nfsd4_end_grace() RECLAIM_COMPLETE path nfsd compound kthread nfsd4_reclaim_complete() inc_reclaim_complete() nfsd4_end_grace() Both callers can observe grace_ended == false on different CPUs, both store true, and both proceed into nfsd4_record_grace_done(), which invokes the active client_tracking_ops->grace_done callback. For tracking ops that drain reclaim_str_hashtbl (legacy_tracking_ops via nfsd4_recdir_purge_old, and the cld v1+ ops via nfsd4_cld_grace_done), grace_done calls nfs4_release_reclaim(), which walks every bucket of reclaim_str_hashtbl with no lock and calls nfs4_remove_reclaim_record() (list_del + kfree) on each entry. Two concurrent walkers corrupt the list and double-free every nfs4_client_reclaim. A concurrent nfsd4_find_reclaim_client() iterating the same bucket reads through freed memory. A third call site exists in nfs4_state_start_net() on the skip_grace startup path, but it runs under nfsd_mutex before any client has connected and before the laundromat's first delayed work fires, so it cannot race with the two callers above. Replace the scattered boolean fields in nfsd_net with a single unsigned long flags word and an enum nfsd_net_flag for the bit positions. The grace_ended race is fixed by using test_and_set_bit(), which is atomic on all architectures. The remaining flags (grace_end_forced, in_grace, somebody_reclaimed, track_reclaim_completes, nfsd_net_up, lockd_up) are converted to use test_bit/set_bit/clear_bit for consistency. This avoids sub-word cmpxchg issues on architectures like Hexagon that only support word-sized atomic operations. | ||||
| CVE-2026-93148 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject MEM_ALLOC BTF accesses past object bounds BTF struct walks relax the struct-size check for accesses through a trailing flexible array. That is valid for ordinary BTF type walking, but PTR_TO_BTF_ID | MEM_ALLOC values point to objects allocated with the static BTF type size. When walking a MEM_ALLOC object, reject the access before applying the flexible-array relaxation if the access range extends past the struct size. Apply the same policy to struct ID matching so kfunc and kptr type checks do not walk past the allocated object bounds either. | ||||
| CVE-2026-90409 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Add vm_bind region with kbo range overlap check When a VM is created, caller has to specify the range of the address space carve-out set aside for mapping kernel BO's. That means vm_bind mappings of UM-exposed BO's should not intersect with that region, but at the moment we're not checking this. At first, I thought of giving these values to drm_gpuvm_init() through its reserve_{offset, range} arguments, but it turns out that is meant for VM address spans that are not managed through the usual drm_gpuvm split/merge circuit, so storing the end of the user VA range at VM creation time and doing a quick check in the vm_bind ioctl path was the simplest workaround. The new check also makes sure vm_bind range doesn't overflow the size of a 64-bit unsigned integer. That was already being done further down the call stack inside drm_gpuvm_sm_map -> drm_gpuvm_range_valid, but it's best to fail early in the driver before GPUVM functions are invoked so that we won't waste time allocating vm_bind context resources. | ||||
| CVE-2026-90399 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix stride mismatch in mac_phy_caps_parse() Currently, in ath12k_wmi_mac_phy_caps_parse(), kzalloc() sizes the mac_phy_caps buffer as tot_phy_id * len, where len is clamped to min(firmware_len, sizeof(struct ath12k_wmi_mac_phy_caps_params)). The subsequent memcpy() destination advances by sizeof(full struct) per slot via C pointer arithmetic, not by the clamped len. When firmware sends short TLVs, the second and later slots are written past the end of the allocation. The reader in ath12k_pull_mac_phy_cap_svc_ready_ext() also indexes the buffer with full-struct pointer arithmetic, so the allocation must match that stride. Fix by using kzalloc_objs(), which derives the element size from the pointer type, making allocation size and pointer stride provably consistent regardless of what len the firmware provides. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3 | ||||
| CVE-2026-90320 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate external xattr entries when reading metadata ocfs2_validate_xattr_block() checks the xattr block header before the block reaches higher-level xattr users, but it does not verify that a non-indexed block's xh_count and entry offsets fit inside the block. Indexed buckets likewise reach list/get consumers after ECC without an entry-bounds check. Use the flat xattr entry validator for non-indexed external xattr blocks, and use a bucket-specific validator for indexed buckets at metadata read time. The bucket validator keeps the entry array bounded by the first bucket block while checking name/value offsets against the bucket block they target. Reject corrupted external xattr metadata before listxattr() or getxattr() can walk out-of-range entry arrays or name/value offsets. Validation reproduced this kernel report: BUG: KASAN: use-after-free in ocfs2_xattr_list_entries+0xd7/0x190 Read of size 1 at addr ffff88810a654007 by task ocfs2_xattr_lis/630 Call Trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 kasan_report+0xe0/0x110 ocfs2_xattr_list_entries+0xd7/0x190 ocfs2_listxattr+0x3f6/0x610 listxattr+0x90/0xe0 path_listxattrat+0xed/0x220 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2026-90142 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: virtio_net: Fix resize of the RX ring When a AF_XDP socket is attached, the virtnet_rx_resize should resize the rq->xsk_buffs XSK buffer array. Otherwise, when the size grows, the virtnet_rx_resume() causes a write past the end of the array. This is easily reproducable with ethtool -G ens3 rx 32 ./xdpsock -i eth0 -q 0 -r -z & ethtool -G eth0 rx 256 | ||||
| CVE-2026-89906 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Refactor jump offset calculation in tail call The old macro-based jmp_offset calculation derives the jump distance from a stale prior-pass code stride, which can lead to wrong branch offsets and soft lockups under extra JIT passes. Fix this by calculating the offset directly on the absolute target: "ctx->offset[insn + 1] - ctx->idx". To avoid a false 16-bit range check abort during size estimation, add a "ctx->image == NULL" guard to inject a safe dummy offset. | ||||
| CVE-2026-89806 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/sysfb: ofdrm: Fix integer overflow in fb_size calculation The framebuffer size calculation `fb_size = linebytes * height` can overflow when both values are large (e.g., 46341 * 46341 > INT_MAX). Since linebytes and height are both int types, the multiplication is performed as int * int, which results in undefined behavior on overflow. Use check_mul_overflow() to detect and prevent this overflow, consistent with the approach used in simpledrm.c and corebootdrm.c. | ||||
| CVE-2026-72367 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iomap: guard io_size EOF trim against concurrent truncate underflow iomap: fix zero padding data issue in concurrent append writes changed ioend accounting so that io_size tracks only valid data within EOF. This trims io_size when a writeback range extends past end_pos: ioend->io_size += map_len; if (ioend->io_offset + ioend->io_size > end_pos) ioend->io_size = end_pos - ioend->io_offset; However, if end_pos ends up below ioend->io_offset, the subtraction becomes negative and is stored in size_t io_size, causing an unsigned wrap to a huge value. This can happen when writeback continues past byte-level EOF up to a block-aligned range, or when a concurrent truncate shrinks the file after end_pos was sampled in iomap_writeback_handle_eof(). A wrapped io_size can mislead append detection and corrupt completion-time size handling, since filesystem end_io paths consume io_size for decisions such as on-disk EOF updates and unwritten/COW completion ranges. Fix this by clamping io_size to zero when EOF has moved to or before the ioend start offset. This preserves the original intent of trimming io_size to valid in-EOF data while avoiding the underflow. | ||||
| CVE-2026-72352 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: bpf: Fix hid_bpf_get_data() range check hid_bpf_get_data() returns a pointer into the HID-BPF context data when the caller-provided offset and size fit inside ctx->allocated_size. The current check adds rdwr_buf_size and offset before comparing the result against ctx->allocated_size. Since both values are unsigned, a very large size can wrap the sum below ctx->allocated_size and make the helper return a pointer even though the requested range is not contained in the backing buffer. Use check_add_overflow() to reject wrapped range ends before comparing the requested range end against ctx->allocated_size. | ||||
| CVE-2026-68470 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: validate extension-frame layout before RX Extension frames only have the extension header at the regular 802.11 header offset. The generic RX path can still reach helpers and interface dispatch code that read regular header address fields before unsupported extension subtypes are dropped. mac80211 currently only handles S1G beacon extension frames. Drop other extension subtypes before they can reach regular-header RX processing. For S1G beacons, linearize the SKB with the management-frame path and require the fixed S1G beacon header, including optional fixed fields indicated by frame control, before generic RX dispatch. Route S1G beacons through the station/default-link RX path without regular-header station lookup. Avoid regular-header address reads in the mac80211 RX paths that process S1G extension beacons, including accept-frame, duplicate-detection, address-copy, and MLO address-translation paths. Also make ieee80211_get_bssid() length-safe before returning the S1G source-address pointer. | ||||
| CVE-2026-68447 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: clamp v9 CRIU control stack checkpoint copy to BO size CRIU checkpoint copies the MQD control stack using cp_hqd_cntl_stack_size from hardware without bounding it to the allocated BO region. If the HW field is larger than the queue's control stack allocation, memcpy reads past the BO into adjacent GTT memory and can leak kernel data to userspace. Store the page-aligned control stack BO size in mqd_manager and clamp checkpoint copies and reported checkpoint sizes to min(cp_hqd_cntl_stack_size, mm->ctl_stack_size). Apply the same bound for multi-XCC v9.4.3 checkpoint layout. (cherry picked from commit 6c2abd0ec09e86c6323010673766f76050e28aa3) | ||||
| CVE-2026-68421 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 0.0 Low |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Don't warn on core-sched forced idle in put_prev_task_scx() put_prev_task_scx() warns when a runnable task drops to a lower sched_class without SCX_OPS_ENQ_LAST, on the assumption that balance_one() would have kept it running. Core scheduling breaks that: a forced-idle SMT sibling reschedules through the core_pick fast path in pick_next_task(), which skips pick_task_scx() and thus balance_one(), so a runnable task can drop to idle with ENQ_LAST unset. Gate the warning on sched_cpu_cookie_match(): a cookie mismatch means core scheduling forced the idle, while a match (or core scheduling off) still catches a genuine missing-ENQ_LAST drop. | ||||
| CVE-2026-64539 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: eir: Fix stack OOB write when prepending the Flags AD eir_create_adv_data() builds the advertising data into a fixed-size buffer ("size", 31 for the legacy path). It may prepend a 3-byte "Flags" AD structure (LE_AD_NO_BREDR on an LE-only controller) and then copies the per-instance data without checking that it still fits: memcpy(ptr, adv->adv_data, adv->adv_data_len); tlv_data_max_len() only reserves those 3 bytes when the user-supplied flags carry a managed-flags bit, so an instance added with flags == 0 is accepted with adv_data_len up to the full buffer. At advertise time the flags are still prepended, and the memcpy() writes 3 + adv_data_len bytes into the size-byte buffer: BUG: KASAN: stack-out-of-bounds in eir_create_adv_data (net/bluetooth/eir.c:301) Write of size 31 at addr ffff88800a547bdc by task kworker/u9:0/65 Workqueue: hci0 hci_cmd_sync_work __asan_memcpy (mm/kasan/shadow.c:106) eir_create_adv_data (net/bluetooth/eir.c:301) hci_update_adv_data_sync (net/bluetooth/hci_sync.c:1310) hci_schedule_adv_instance_sync (net/bluetooth/hci_sync.c:1817) hci_cmd_sync_work (net/bluetooth/hci_sync.c:332) This frame has 1 object: [32, 64) 'cp' The "Flags" structure is added by the kernel, not requested by userspace, so only prepend it when it fits together with the instance advertising data; when there is no room for both, drop the flags rather than the user-provided data. Reachable by a local user with CAP_NET_ADMIN owning an LE-only controller on the legacy advertising path. | ||||