| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: devicetree: fix null pointer dereferencing in pinctrl_dt_to_map
Here is the BUG report by KASAN about null pointer dereference:
BUG: KASAN: null-ptr-deref in strcmp+0x2e/0x50
Read of size 1 at addr 0000000000000000 by task python3/2640
Call Trace:
strcmp
__of_find_property
of_find_property
pinctrl_dt_to_map
kasprintf() would return NULL pointer when kmalloc() fail to allocate.
So directly return ENOMEM, if kasprintf() return NULL pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/drv: Fix potential memory leak in drm_dev_init()
drm_dev_init() will add drm_dev_init_release() as a callback. When
drmm_add_action() failed, the release function won't be added. As the
result, the ref cnt added by device_get() in drm_dev_init() won't be put
by drm_dev_init_release(), which leads to the memleak. Use
drmm_add_action_or_reset() instead of drmm_add_action() to prevent
memleak.
unreferenced object 0xffff88810bc0c800 (size 2048):
comm "modprobe", pid 8322, jiffies 4305809845 (age 15.292s)
hex dump (first 32 bytes):
e8 cc c0 0b 81 88 ff ff ff ff ff ff 00 00 00 00 ................
20 24 3c 0c 81 88 ff ff 18 c8 c0 0b 81 88 ff ff $<.............
backtrace:
[<000000007251f72d>] __kmalloc+0x4b/0x1c0
[<0000000045f21f26>] platform_device_alloc+0x2d/0xe0
[<000000004452a479>] platform_device_register_full+0x24/0x1c0
[<0000000089f4ea61>] 0xffffffffa0736051
[<00000000235b2441>] do_one_initcall+0x7a/0x380
[<0000000001a4a177>] do_init_module+0x5c/0x230
[<000000002bf8a8e2>] load_module+0x227d/0x2420
[<00000000637d6d0a>] __do_sys_finit_module+0xd5/0x140
[<00000000c99fc324>] do_syscall_64+0x3f/0x90
[<000000004d85aa77>] entry_SYSCALL_64_after_hwframe+0x63/0xcd |
| In the Linux kernel, the following vulnerability has been resolved:
drm/scheduler: fix fence ref counting
We leaked dependency fences when processes were beeing killed.
Additional to that grab a reference to the last scheduled fence. |
| In the Linux kernel, the following vulnerability has been resolved:
drm: Fix potential null-ptr-deref in drm_vblank_destroy_worker()
drm_vblank_init() call drmm_add_action_or_reset() with
drm_vblank_init_release() as action. If __drmm_add_action() failed, will
directly call drm_vblank_init_release() with the vblank whose worker is
NULL. As the resule, a null-ptr-deref will happen in
kthread_destroy_worker(). Add the NULL check before calling
drm_vblank_destroy_worker().
BUG: null-ptr-deref
KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f]
CPU: 5 PID: 961 Comm: modprobe Not tainted 6.0.0-11331-gd465bff130bf-dirty
RIP: 0010:kthread_destroy_worker+0x25/0xb0
Call Trace:
<TASK>
drm_vblank_init_release+0x124/0x220 [drm]
? drm_crtc_vblank_restore+0x8b0/0x8b0 [drm]
__drmm_add_action_or_reset+0x41/0x50 [drm]
drm_vblank_init+0x282/0x310 [drm]
vkms_init+0x35f/0x1000 [vkms]
? 0xffffffffc4508000
? lock_is_held_type+0xd7/0x130
? __kmem_cache_alloc_node+0x1c2/0x2b0
? lock_is_held_type+0xd7/0x130
? 0xffffffffc4508000
do_one_initcall+0xd0/0x4f0
...
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0 |
| In the Linux kernel, the following vulnerability has been resolved:
ata: libata-transport: fix error handling in ata_tport_add()
In ata_tport_add(), the return value of transport_add_device() is
not checked. As a result, it causes null-ptr-deref while removing
the module, because transport_remove_device() is called to remove
the device that was not added.
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0
CPU: 12 PID: 13605 Comm: rmmod Kdump: loaded Tainted: G W 6.1.0-rc3+ #8
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : device_del+0x48/0x39c
lr : device_del+0x44/0x39c
Call trace:
device_del+0x48/0x39c
attribute_container_class_device_del+0x28/0x40
transport_remove_classdev+0x60/0x7c
attribute_container_device_trigger+0x118/0x120
transport_remove_device+0x20/0x30
ata_tport_delete+0x34/0x60 [libata]
ata_port_detach+0x148/0x1b0 [libata]
ata_pci_remove_one+0x50/0x80 [libata]
ahci_remove_one+0x4c/0x8c [ahci]
Fix this by checking and handling return value of transport_add_device()
in ata_tport_add(). |
| In the Linux kernel, the following vulnerability has been resolved:
ata: libata-transport: fix error handling in ata_tlink_add()
In ata_tlink_add(), the return value of transport_add_device() is
not checked. As a result, it causes null-ptr-deref while removing
the module, because transport_remove_device() is called to remove
the device that was not added.
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0
CPU: 33 PID: 13850 Comm: rmmod Kdump: loaded Tainted: G W 6.1.0-rc3+ #12
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : device_del+0x48/0x39c
lr : device_del+0x44/0x39c
Call trace:
device_del+0x48/0x39c
attribute_container_class_device_del+0x28/0x40
transport_remove_classdev+0x60/0x7c
attribute_container_device_trigger+0x118/0x120
transport_remove_device+0x20/0x30
ata_tlink_delete+0x88/0xb0 [libata]
ata_tport_delete+0x2c/0x60 [libata]
ata_port_detach+0x148/0x1b0 [libata]
ata_pci_remove_one+0x50/0x80 [libata]
ahci_remove_one+0x4c/0x8c [ahci]
Fix this by checking and handling return value of transport_add_device()
in ata_tlink_add(). |
| In the Linux kernel, the following vulnerability has been resolved:
ata: libata-transport: fix error handling in ata_tdev_add()
In ata_tdev_add(), the return value of transport_add_device() is
not checked. As a result, it causes null-ptr-deref while removing
the module, because transport_remove_device() is called to remove
the device that was not added.
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0
CPU: 13 PID: 13603 Comm: rmmod Kdump: loaded Tainted: G W 6.1.0-rc3+ #36
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : device_del+0x48/0x3a0
lr : device_del+0x44/0x3a0
Call trace:
device_del+0x48/0x3a0
attribute_container_class_device_del+0x28/0x40
transport_remove_classdev+0x60/0x7c
attribute_container_device_trigger+0x118/0x120
transport_remove_device+0x20/0x30
ata_tdev_delete+0x24/0x50 [libata]
ata_tlink_delete+0x40/0xa0 [libata]
ata_tport_delete+0x2c/0x60 [libata]
ata_port_detach+0x148/0x1b0 [libata]
ata_pci_remove_one+0x50/0x80 [libata]
ahci_remove_one+0x4c/0x8c [ahci]
Fix this by checking and handling return value of transport_add_device()
in ata_tdev_add(). In the error path, device_del() is called to delete
the device which was added earlier in this function, and ata_tdev_free()
is called to free ata_dev. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix connections leak when tlink setup failed
If the tlink setup failed, lost to put the connections, then
the module refcnt leak since the cifsd kthread not exit.
Also leak the fscache info, and for next mount with fsc, it will
print the follow errors:
CIFS: Cache volume key already in use (cifs,127.0.0.1:445,TEST)
Let's check the result of tlink setup, and do some cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
mISDN: fix possible memory leak in mISDN_dsp_element_register()
Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's
bus_id string array"), the name of device is allocated dynamically,
use put_device() to give up the reference, so that the name can be
freed in kobject_cleanup() when the refcount is 0.
The 'entry' is going to be freed in mISDN_dsp_dev_release(), so the
kfree() is removed. list_del() is called in mISDN_dsp_dev_release(),
so it need be initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
octeon_ep: fix potential memory leak in octep_device_setup()
When occur unsupported_dev and mbox init errors, it did not free oct->conf
and iounmap() oct->mmio[i].hw_addr. That would trigger memory leak problem.
Add kfree() for oct->conf and iounmap() for oct->mmio[i].hw_addr under
unsupported_dev and mbox init errors to fix the problem. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mhi: Fix memory leak in mhi_net_dellink()
MHI driver registers network device without setting the
needs_free_netdev flag, and does NOT call free_netdev() when
unregisters network device, which causes a memory leak.
This patch calls free_netdev() to fix it since netdev_priv
is used after unregister. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ena: Fix error handling in ena_init()
The ena_init() won't destroy workqueue created by
create_singlethread_workqueue() when pci_register_driver() failed.
Call destroy_workqueue() when pci_register_driver() failed to prevent the
resource leak. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: switchdev: Fix memory leaks when changing VLAN protocol
The bridge driver can offload VLANs to the underlying hardware either
via switchdev or the 8021q driver. When the former is used, the VLAN is
marked in the bridge driver with the 'BR_VLFLAG_ADDED_BY_SWITCHDEV'
private flag.
To avoid the memory leaks mentioned in the cited commit, the bridge
driver will try to delete a VLAN via the 8021q driver if the VLAN is not
marked with the previously mentioned flag.
When the VLAN protocol of the bridge changes, switchdev drivers are
notified via the 'SWITCHDEV_ATTR_ID_BRIDGE_VLAN_PROTOCOL' attribute, but
the 8021q driver is also called to add the existing VLANs with the new
protocol and delete them with the old protocol.
In case the VLANs were offloaded via switchdev, the above behavior is
both redundant and buggy. Redundant because the VLANs are already
programmed in hardware and drivers that support VLAN protocol change
(currently only mlx5) change the protocol upon the switchdev attribute
notification. Buggy because the 8021q driver is called despite these
VLANs being marked with 'BR_VLFLAG_ADDED_BY_SWITCHDEV'. This leads to
memory leaks [1] when the VLANs are deleted.
Fix by not calling the 8021q driver for VLANs that were already
programmed via switchdev.
[1]
unreferenced object 0xffff8881f6771200 (size 256):
comm "ip", pid 446855, jiffies 4298238841 (age 55.240s)
hex dump (first 32 bytes):
00 00 7f 0e 83 88 ff ff 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000012819ac>] vlan_vid_add+0x437/0x750
[<00000000f2281fad>] __br_vlan_set_proto+0x289/0x920
[<000000000632b56f>] br_changelink+0x3d6/0x13f0
[<0000000089d25f04>] __rtnl_newlink+0x8ae/0x14c0
[<00000000f6276baf>] rtnl_newlink+0x5f/0x90
[<00000000746dc902>] rtnetlink_rcv_msg+0x336/0xa00
[<000000001c2241c0>] netlink_rcv_skb+0x11d/0x340
[<0000000010588814>] netlink_unicast+0x438/0x710
[<00000000e1a4cd5c>] netlink_sendmsg+0x788/0xc40
[<00000000e8992d4e>] sock_sendmsg+0xb0/0xe0
[<00000000621b8f91>] ____sys_sendmsg+0x4ff/0x6d0
[<000000000ea26996>] ___sys_sendmsg+0x12e/0x1b0
[<00000000684f7e25>] __sys_sendmsg+0xab/0x130
[<000000004538b104>] do_syscall_64+0x3d/0x90
[<0000000091ed9678>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 |
| In the Linux kernel, the following vulnerability has been resolved:
drbd: use after free in drbd_create_device()
The drbd_destroy_connection() frees the "connection" so use the _safe()
iterator to prevent a use after free. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix missing xas_retry() calls in xarray iteration
netfslib has a number of places in which it performs iteration of an xarray
whilst being under the RCU read lock. It *should* call xas_retry() as the
first thing inside of the loop and do "continue" if it returns true in case
the xarray walker passed out a special value indicating that the walk needs
to be redone from the root[*].
Fix this by adding the missing retry checks.
[*] I wonder if this should be done inside xas_find(), xas_next_node() and
suchlike, but I'm told that's not an simple change to effect.
This can cause an oops like that below. Note the faulting address - this
is an internal value (|0x2) returned from xarray.
BUG: kernel NULL pointer dereference, address: 0000000000000402
...
RIP: 0010:netfs_rreq_unlock+0xef/0x380 [netfs]
...
Call Trace:
netfs_rreq_assess+0xa6/0x240 [netfs]
netfs_readpage+0x173/0x3b0 [netfs]
? init_wait_var_entry+0x50/0x50
filemap_read_page+0x33/0xf0
filemap_get_pages+0x2f2/0x3f0
filemap_read+0xaa/0x320
? do_filp_open+0xb2/0x150
? rmqueue+0x3be/0xe10
ceph_read_iter+0x1fe/0x680 [ceph]
? new_sync_read+0x115/0x1a0
new_sync_read+0x115/0x1a0
vfs_read+0xf3/0x180
ksys_read+0x5f/0xe0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Changes:
========
ver #2)
- Changed an unsigned int to a size_t to reduce the likelihood of an
overflow as per Willy's suggestion.
- Added an additional patch to fix the maths. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: fix a memory leak in nvmet_auth_set_key
When changing dhchap secrets we need to release the old
secrets as well.
kmemleak complaint:
--
unreferenced object 0xffff8c7f44ed8180 (size 64):
comm "check", pid 7304, jiffies 4295686133 (age 72034.246s)
hex dump (first 32 bytes):
44 48 48 43 2d 31 3a 30 30 3a 4c 64 4c 4f 64 71 DHHC-1:00:LdLOdq
79 56 69 67 77 48 55 32 6d 5a 59 4c 7a 35 59 38 yVigwHU2mZYLz5Y8
backtrace:
[<00000000b6fc5071>] kstrdup+0x2e/0x60
[<00000000f0f4633f>] 0xffffffffc0e07ee6
[<0000000053006c05>] 0xffffffffc0dff783
[<00000000419ae922>] configfs_write_iter+0xb1/0x120
[<000000008183c424>] vfs_write+0x2be/0x3c0
[<000000009005a2a5>] ksys_write+0x5f/0xe0
[<00000000cd495c89>] do_syscall_64+0x38/0x90
[<00000000f2a84ac5>] entry_SYSCALL_64_after_hwframe+0x63/0xcd |
| In the Linux kernel, the following vulnerability has been resolved:
netdevsim: Fix memory leak of nsim_dev->fa_cookie
kmemleak reports this issue:
unreferenced object 0xffff8881bac872d0 (size 8):
comm "sh", pid 58603, jiffies 4481524462 (age 68.065s)
hex dump (first 8 bytes):
04 00 00 00 de ad be ef ........
backtrace:
[<00000000c80b8577>] __kmalloc+0x49/0x150
[<000000005292b8c6>] nsim_dev_trap_fa_cookie_write+0xc1/0x210 [netdevsim]
[<0000000093d78e77>] full_proxy_write+0xf3/0x180
[<000000005a662c16>] vfs_write+0x1c5/0xaf0
[<000000007aabf84a>] ksys_write+0xed/0x1c0
[<000000005f1d2e47>] do_syscall_64+0x3b/0x90
[<000000006001c6ec>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
The issue occurs in the following scenarios:
nsim_dev_trap_fa_cookie_write()
kmalloc() fa_cookie
nsim_dev->fa_cookie = fa_cookie
..
nsim_drv_remove()
The fa_cookie allocked in nsim_dev_trap_fa_cookie_write() is not freed. To
fix, add kfree(nsim_dev->fa_cookie) to nsim_drv_remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Fix null pointer dereference in ftrace_add_mod()
The @ftrace_mod is allocated by kzalloc(), so both the members {prev,next}
of @ftrace_mode->list are NULL, it's not a valid state to call list_del().
If kstrdup() for @ftrace_mod->{func|module} fails, it goes to @out_free
tag and calls free_ftrace_mod() to destroy @ftrace_mod, then list_del()
will write prev->next and next->prev, where null pointer dereference
happens.
BUG: kernel NULL pointer dereference, address: 0000000000000008
Oops: 0002 [#1] PREEMPT SMP NOPTI
Call Trace:
<TASK>
ftrace_mod_callback+0x20d/0x220
? do_filp_open+0xd9/0x140
ftrace_process_regex.isra.51+0xbf/0x130
ftrace_regex_write.isra.52.part.53+0x6e/0x90
vfs_write+0xee/0x3a0
? __audit_filter_op+0xb1/0x100
? auditd_test_task+0x38/0x50
ksys_write+0xa5/0xe0
do_syscall_64+0x3a/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Kernel panic - not syncing: Fatal exception
So call INIT_LIST_HEAD() to initialize the list member to fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix memory leak in tracing_read_pipe()
kmemleak reports this issue:
unreferenced object 0xffff888105a18900 (size 128):
comm "test_progs", pid 18933, jiffies 4336275356 (age 22801.766s)
hex dump (first 32 bytes):
25 73 00 90 81 88 ff ff 26 05 00 00 42 01 58 04 %s......&...B.X.
03 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000560143a1>] __kmalloc_node_track_caller+0x4a/0x140
[<000000006af00822>] krealloc+0x8d/0xf0
[<00000000c309be6a>] trace_iter_expand_format+0x99/0x150
[<000000005a53bdb6>] trace_check_vprintf+0x1e0/0x11d0
[<0000000065629d9d>] trace_event_printf+0xb6/0xf0
[<000000009a690dc7>] trace_raw_output_bpf_trace_printk+0x89/0xc0
[<00000000d22db172>] print_trace_line+0x73c/0x1480
[<00000000cdba76ba>] tracing_read_pipe+0x45c/0x9f0
[<0000000015b58459>] vfs_read+0x17b/0x7c0
[<000000004aeee8ed>] ksys_read+0xed/0x1c0
[<0000000063d3d898>] do_syscall_64+0x3b/0x90
[<00000000a06dda7f>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
iter->fmt alloced in
tracing_read_pipe() -> .. ->trace_iter_expand_format(), but not
freed, to fix, add free in tracing_release_pipe() |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix memory leak in test_gen_synth_cmd() and test_empty_synth_event()
test_gen_synth_cmd() only free buf in fail path, hence buf will leak
when there is no failure. Add kfree(buf) to prevent the memleak. The
same reason and solution in test_empty_synth_event().
unreferenced object 0xffff8881127de000 (size 2048):
comm "modprobe", pid 247, jiffies 4294972316 (age 78.756s)
hex dump (first 32 bytes):
20 67 65 6e 5f 73 79 6e 74 68 5f 74 65 73 74 20 gen_synth_test
20 70 69 64 5f 74 20 6e 65 78 74 5f 70 69 64 5f pid_t next_pid_
backtrace:
[<000000004254801a>] kmalloc_trace+0x26/0x100
[<0000000039eb1cf5>] 0xffffffffa00083cd
[<000000000e8c3bc8>] 0xffffffffa00086ba
[<00000000c293d1ea>] do_one_initcall+0xdb/0x480
[<00000000aa189e6d>] do_init_module+0x1cf/0x680
[<00000000d513222b>] load_module+0x6a50/0x70a0
[<000000001fd4d529>] __do_sys_finit_module+0x12f/0x1c0
[<00000000b36c4c0f>] do_syscall_64+0x3f/0x90
[<00000000bbf20cf3>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
unreferenced object 0xffff8881127df000 (size 2048):
comm "modprobe", pid 247, jiffies 4294972324 (age 78.728s)
hex dump (first 32 bytes):
20 65 6d 70 74 79 5f 73 79 6e 74 68 5f 74 65 73 empty_synth_tes
74 20 20 70 69 64 5f 74 20 6e 65 78 74 5f 70 69 t pid_t next_pi
backtrace:
[<000000004254801a>] kmalloc_trace+0x26/0x100
[<00000000d4db9a3d>] 0xffffffffa0008071
[<00000000c31354a5>] 0xffffffffa00086ce
[<00000000c293d1ea>] do_one_initcall+0xdb/0x480
[<00000000aa189e6d>] do_init_module+0x1cf/0x680
[<00000000d513222b>] load_module+0x6a50/0x70a0
[<000000001fd4d529>] __do_sys_finit_module+0x12f/0x1c0
[<00000000b36c4c0f>] do_syscall_64+0x3f/0x90
[<00000000bbf20cf3>] entry_SYSCALL_64_after_hwframe+0x63/0xcd |
