| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: block: Fix zones_cond out-of-bounds write on zone report
blk_revalidate_disk_zones() sizes the zones_cond array from the disk
capacity and zone size, but the index used by blk_revalidate_zone_cond()
comes from the device-driven report_zones() walk and is never checked
against the array size. A device reporting more zones than fit the array
makes blk_zone_set_cond() write out of bounds.
One way to reach this is a zone count exceeding 32 bits: both
blk_revalidate_zone_args.nr_zones and struct zoned_disk_info.nr_zones are
unsigned int, so a disk advertising more than UINT_MAX zones (e.g. 2^32 +
1024 zones of one 512-byte logical block) gets its zone count truncated to
a small value, undersizing the array while the report walk keeps counting
upward.
Check the index against the array size before storing the zone condition,
and refuse to revalidate when the zone count does not fit 32 bits. |
| An Out-of-bounds Write vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent attacker which sends a specific set of BGP communities to cause a Denial-of-Service (DoS) as rpd crashes when graceful-shutdown sender community is added when attempting to advertise. |
| A flaw was found in the DPDK GSO library. When software GSO copies packet headers into a new mbuf, it does not check that the header fits in the source first segment or in the destination buffer, and a header longer than the configured GSO segment size can underflow the payload-size calculation. A remote or guest-supplied packet processed with software GSO can trigger an out-of-bounds read or write. |
| A vulnerability exists in NGINX Plus and NGINX Open Source when a location is configured that uses the alias directive together with rewrite and a set or return directive referencing the $request_filename variable. Alternatively, the same result could be achieved when the $request_filename variable is used in an access log format directive. An unauthenticated attacker along with conditions beyond their control can exploit this vulnerability by sending crafted HTTP requests. This may cause a heap buffer overflow in the NGINX worker process leading to a restart. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR.
Impact:
This vulnerability may allow remote attackers to cause a denial-of-service (DoS) on the NGINX system or to possibly trigger a code execution. There is no control plane exposure; this is a data plane issue only.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| Out-of-bounds write vulnerability in Citrix Workspace app for Windows.
This issue affects Workspace app for Windows: before 2603.20 CR, before LTSR 2607 Hotfix 1, and before LTSR 2507 CU3 Hotfix 1. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wfx: validate MIB read length before copying to caller
wfx_hif_read_mib() copies reply->length bytes from the firmware
response into the caller-provided buffer without checking that
reply->length does not exceed val_len. A firmware response with
a length field larger than expected overruns the caller buffer and
reads past the end of the reply allocation.
Replace the dead -ENOMEM check with an active validation that
reply->length fits within val_len before the memcpy. |
| Photoshop Desktop is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Photoshop Desktop is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| AMI APTIOV contains vulnerabilities in BIOS where users may cause "Out-of-bounds Write” by local access. Successful exploitation of this vulnerability could lead to buffer overflows, memory corruption, and arbitrary code execution, and also impact Confidentiality, Integrity, and Availability. |
| The Redis server command parser in Apache bRPC accepts an empty RESP array as a command header. A remote unauthenticated attacker who can reach a bRPC server with Redis service enabled can send an empty array header followed by a bulk string, causing an out-of-bounds write in the parser and crashing the process.
Root Cause:
RedisCommandParser::ConsumeImpl rejected negative RESP array counts but accepted zero. It resized the command argument vector to zero elements and continued parsing. When a following bulk string was parsed, the only index guard was a CHECK. In configurations where fatal logs do not abort immediately, execution could continue and write to _args[0] even though the vector was empty.
Affected Scenarios:
Deployments that enable ServerOptions.redis_service and accept Redis protocol traffic from untrusted clients. The issue is reached during parsing before command handling or authentication.
How to Fix:
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3354
Note:
The fix rejects empty RESP arrays as invalid Redis commands and replaces the internal index CHECK with an explicit parse error so malformed command streams cannot fall through to an indexed vector write. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Expressway Series software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-76490 are related to issues concerning out-of-bounds writes that are grouped under the Common Weakness Enumeration (CWE) Base CWE-787. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco owned Open Source Snort 3 Software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20043 are related to issues concerning out-of-bounds writes that are grouped under the Common Weakness Enumeration (CWE) Base CWE-787. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Validate CHAP_R length before base64 decode
chap_server_compute_hash() allocates client_digest as
kzalloc(chap->digest_size) and then, for BASE64-encoded responses,
passes chap_r directly to chap_base64_decode() without checking whether
the input length could produce more than digest_size bytes of output.
chap_base64_decode() writes to the destination unconditionally as long
as there is input to consume. With MAX_RESPONSE_LENGTH set to 128 and
the "0b" prefix stripped by extract_param(), up to 127 base64 characters
can reach the decoder. 127 characters decode to 95 bytes. For SHA-256
(digest_size=32) this overflows client_digest by 63 bytes; for MD5
(digest_size=16) the overflow is 79 bytes.
The length check at line 344 fires after the write has already happened.
The HEX branch in the same switch statement already validates the length
up front. Apply the same approach to the BASE64 branch: strip trailing
base64 padding characters, then reject any input whose data length
exceeds DIV_ROUND_UP(digest_size * 4, 3) before calling the decoder.
Stripping trailing '=' before the comparison handles both padded and
unpadded encodings. chap_base64_decode() already returns early on '=',
so the full original string is still passed to the decoder unchanged.
The mutual CHAP path decodes CHAP_C into initiatorchg_binhex, which is
kzalloc(CHAP_CHALLENGE_STR_LEN). extract_param() caps initiatorchg at
CHAP_CHALLENGE_STR_LEN characters, so at most CHAP_CHALLENGE_STR_LEN-1
base64 characters reach the decoder. The maximum decoded size,
DIV_ROUND_UP((CHAP_CHALLENGE_STR_LEN-1) * 3, 4), is less than
CHAP_CHALLENGE_STR_LEN, so no overflow is possible there. A comment is
added at the call site to document this. |
| A stack-based buffer overflow vulnerability in Fortinet FortiOS 7.4.0 through 7.4.3, FortiOS 7.2.0 through 7.2.7, FortiOS 7.0.0 through 7.0.14, FortiOS 6.4 all versions, FortiOS 6.2 all versions, FortiOS 6.0 all versions, FortiPAM 1.2 all versions, FortiPAM 1.1 all versions, FortiPAM 1.0 all versions, FortiProxy 7.4.0 through 7.4.3, FortiProxy 7.2.0 through 7.2.9, FortiProxy 7.0.0 through 7.0.16, FortiProxy 2.0 all versions, FortiProxy 01.02 all versions, FortiProxy 1.2 all versions, FortiProxy 01.01 all versions, FortiProxy 1.1 all versions, FortiProxy 01.00 all versions, FortiSwitchManager 7.2.0 through 7.2.3, FortiSwitchManager 7.0.1 through 7.0.3 allows attacker to execute unauthorized code or commands via specially crafted packets. |
| A out-of-bounds write vulnerability in Fortinet FortiOS 7.4.0 through 7.4.2, FortiOS 7.2.0 through 7.2.6, FortiOS 7.0.0 through 7.0.13, FortiOS 6.4.0 through 6.4.14, FortiOS 6.2.0 through 6.2.15, FortiOS 6.0 all versions, FortiProxy 7.4.0 through 7.4.2, FortiProxy 7.2.0 through 7.2.8, FortiProxy 7.0.0 through 7.0.14, FortiProxy 2.0.0 through 2.0.13, FortiProxy 01.02 all versions, FortiProxy 1.2 all versions, FortiProxy 01.01 all versions, FortiProxy 1.1 all versions, FortiProxy 01.00 all versions allows attacker to execute unauthorized code or commands via specifically crafted requests |
| A out-of-bounds write vulnerability in Fortinet FortiOS 7.2.0 through 7.2.3, FortiOS 7.0.0 through 7.0.10, FortiOS 6.4.0 through 6.4.11, FortiOS 6.2.0 through 6.2.13, FortiOS 6.0.0 through 6.0.16, FortiProxy 7.2.0 through 7.2.1, FortiProxy 7.0.0 through 7.0.7, FortiProxy 2.0 all versions, FortiProxy 01.02 all versions, FortiProxy 1.2 all versions, FortiProxy 01.01 all versions, FortiProxy 1.1 all versions, FortiProxy 01.00 all versions allows an authenticated attacker to execute unauthorized code or commands via specifically crafted requests. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to 7.1.2-32, a crafted EXR image can cause the EXR decoder to write beyond a heap buffer, causing the process to crash. This issue is fixed in version 7.1.2-32. |
| Out of bounds write in Forms in Google Chrome prior to 156.0.8078.47 allowed a remote attacker to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Low) |
| Sharp before 0.35.4 bundles a vulnerable libheif dependency that allows attackers to achieve possible remote code execution on glibc-based Linux by supplying crafted images. Attackers can submit malicious AVIF/HEIF input to applications processing untrusted images with sharp, triggering libheif decoding flaws to execute code. |
| libLAS through 1.8.1 contains a heap out-of-bounds write vulnerability in the point record reader caused by truncating the schema byte size to 16 bits when sizing the point buffer. Attackers can craft a .las file with a LASSchema variable length record whose schema exceeds 65535 bytes, so tools like lasinfo, las2las, or las2txt write attacker-controlled bytes past the heap buffer, causing memory corruption and crashes. |
