| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wcn36xx: fix heap overflow from oversized firmware HAL response
The firmware response dispatcher copies all synchronous HAL responses
into the 4096-byte hal_buf without validating the response length. A
response exceeding WCN36XX_HAL_BUF_SIZE causes a heap buffer overflow
with firmware-controlled content.
Add a bounds check on the response length. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: topology: Check PCM and DAI name strings before use
Topology objects store several PCM and DAI names in fixed-size UAPI
arrays. Other topology parser paths validate these fields with bounded
strnlen() checks before using them as C strings, but the PCM and DAI
paths still pass some fixed-size arrays directly to strlen(),
devm_kstrdup(), DAI lookup, and diagnostic prints.
A malformed topology blob with a non-NUL-terminated PCM, DAI, or stream
capability name can therefore make the parser read past the end of the
fixed-size field.
Reject unterminated PCM and DAI name fields before consuming them as C
strings. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt: fix head underflow on XDP head-grow
The xdp.py test test_xdp_native_adjst_head_grow_data crashes when run on
a bnxt machine (and also crashes in NIPA).
It seems that the bug is an underflow in bnxt_rx_multi_page_skb, which
builds the skb head:
napi_build_skb(data_ptr - bp->rx_offset, rxr->rx_page_size);
The problem with this expression is that in page mode, rx_offset is:
bp->rx_offset = NET_IP_ALIGN + XDP_PACKET_HEADROOM;
Which evaluates (at least on x86_64) to 258.
The test test_xdp_native_adjst_head_grow_data tests a case where the
head is adjusted by -256.
When this test runs, data_ptr is shifted to frag_start + 2 (where
frag_start = page_address(page) + offset).
Then, bnxt_rx_multi_page_skb is invoked and the napi_build_skb
expression subtracts 258, landing at an address before frag_start. This
could be either the previous fragment or the previous physical page when
the offset is < 256 (e.g. if the fragment started at offset 0).
When the skb is freed, the page pool fragment reference is dropped on
either the wrong page or the wrong frag of the right page. In either
case, the corrupted reference count can lead to the page being
prematurely recycled while still in use. Once (incorrectly) recycled, it
can be handed out again and on driver teardown this would result in a
double free.
The commit under fixes updated this code to handle the case where the
native page size is >= 64k, but it unintentionally broke the head grow
case.
To fix this, add an offset field to struct bnxt_sw_rx_bd, mirroring the
existing offset field in struct bnxt_sw_rx_agg_bd. Populate it on
allocation and preserve it on reuse.
In bnxt_rx_multi_page_skb, use the newly added offset field to compute
the fragment start and pass that to napi_build_skb. Adjust the layout
with skb_reserve.
There are two cases, the non-adjustment case and the adjustment case.
In both cases, the skb is built at page_address(page) + offset to
account for the case where the native page size >= 64K and skb_reserve
is called with data_ptr - (page_address(page) + offset). That
difference equals bp->rx_offset when data_ptr was not moved, or
bp->rx_offset + xdp_adjust when XDP adjusted the head.
Re-running the failing test with this commit applied causes the test to
run successfully to completion.
The other rx_skb_func implementations don't have this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
soundwire: fix bug in sdw_add_element_group_count found by syzkaller
The original implementation caused an out-of-bounds memory access
in the sdw_add_element_group_count for-loop when i == num.
for (i = 0; i <= num; i++) {
if (rate == group->rates[i] && lane == group->lanes[i])
...
To fix this error, the function now checks for existing rate/lane
entries in the group(a function parameter) using a for-loop before
adding them.
No functional changes apart from this fix. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: resize log->one_page_buf when adopting on-disk page size
log_replay() allocates log->one_page_buf using the page size that was
chosen from the host PAGE_SIZE:
log->one_page_buf = kmalloc(log->page_size, GFP_NOFS);
Later, when a restart area is found, the log page size recorded on disk
is adopted:
t32 = le32_to_cpu(log->rst_info.r_page->sys_page_size);
if (log->page_size != t32) {
log->l_size = log->orig_file_size;
log->page_size = norm_file_page(t32, &log->l_size,
t32 == DefaultLogPageSize);
}
If the on-disk page size is larger than the size used for the initial
allocation, log->page_size grows but one_page_buf is left at its
original, smaller size. A subsequent unaligned read_log_page() then
reads log->page_size bytes into the undersized scratch buffer:
page_buf = page_off ? log->one_page_buf : *buffer;
err = ntfs_read_run_nb_ra(ni->mi.sbi, &ni->file.run, page_vbo, page_buf,
log->page_size, NULL, &log->read_ahead);
overflowing the allocation. This is reachable when mounting a dirty
NTFS volume whose log was formatted with a page size larger than the
buffer initially allocated on the mounting host (for example a 64K-log
volume mounted on a host that allocated a 4K scratch buffer).
Grow one_page_buf when the adopted on-disk page size exceeds the size
used for the initial allocation. On krealloc() failure the original
buffer is left intact and freed by the existing error path. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: reject undersized DACLs before parsing ACEs
parse_dacl() limits the attacker-controlled ACE count by comparing it
with the number of minimal ACEs that fit in the DACL size. The DACL size
field is 16 bits, but the expression subtracts sizeof(struct smb_acl).
Because sizeof() is unsigned, a DACL size smaller than the ACL header
underflows to a large size_t.
A malicious client can reach this with:
SMB2_SET_INFO (InfoType=SMB2_O_INFO_SECURITY)
-> smb2_set_info_sec()
-> set_info_sec()
-> parse_sec_desc()
-> parse_dacl()
-> init_acl_state(..., 0xffff)
-> init_acl_state(..., 0xffff)
-> kmalloc_objs(..., 0xffff)
Thus a malformed security descriptor can make num_aces pass the guard
and drive large temporary ACL state and pointer-array allocations.
Reject DACLs smaller than struct smb_acl before doing the subtraction,
so the ACE count check cannot be bypassed by the underflow. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_lookup: fix catchall element handling with inverted lookups
nft_lookup_eval() decides whether a lookup matched (`found`) from the
direct set lookup and priv->invert before falling back to the
catchall element used by interval sets (e.g. nft_set_rbtree) for the
open-ended default range. Since `found` is never recomputed after
`ext` is replaced by the catchall lookup, inverted lookups
(NFT_LOOKUP_F_INV, "!= @set") can wrongly match or wrongly skip the
catchall element, producing the wrong verdict. Fold the catchall
lookup into `ext` before computing `found`, matching the order
already used by nft_objref_map_eval(). |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: fix hugetlb cgroup rsvd charge/uncharge mismatch
In alloc_hugetlb_folio(), a single h_cg pointer is used for both the rsvd
and non-rsvd hugetlb cgroup charges. When map_chg is set,
hugetlb_cgroup_charge_cgroup_rsvd() stores the charged cgroup in h_cg, but
the immediately following hugetlb_cgroup_charge_cgroup() overwrites h_cg
with the non-rsvd cgroup pointer.
As a result, hugetlb_cgroup_commit_charge_rsvd() stores the wrong
(non-rsvd) cgroup pointer into the folio's rsvd slot.
When the folio is later freed, free_huge_folio() unconditionally calls
both hugetlb_cgroup_uncharge_folio() and
hugetlb_cgroup_uncharge_folio_rsvd(). The rsvd uncharge reads back the
wrong cgroup from the folio and decrements a counter that was never
charged for that cgroup, causing a page_counter underflow:
page_counter underflow: -512 nr_pages=512
WARNING: mm/page_counter.c:61 at page_counter_cancel
Fix this by introducing a separate h_cg_rsvd pointer exclusively for the
rsvd charge path, keeping the rsvd and non-rsvd charges fully independent
through their charge, commit, and error uncharge paths. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: detect mapping-pairs LCN accumulator overflow
The NTFS mapping-pairs parser accumulates relative LCN deltas in a
signed integer. A corrupted attribute can drive that addition past
the representable range.
One corrupt runlist shape sets the accumulated LCN to S64_MAX and
then adds a delta of 1 in the next mapping-pairs entry.
Signed overflow is undefined and can turn an invalid runlist into a
different set of physical clusters.
Check the LCN addition for overflow before storing the next run. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-auth: reject short AUTH_RECEIVE buffers
nvmet_execute_auth_receive() trusts the AUTH_RECEIVE allocation length
after checking only that it is nonzero and matches the transfer length.
In the SUCCESS1 and FAILURE1/default states, that lets a remote NVMe-oF
initiator reach the fixed-size DH-HMAC-CHAP response builders with a
kmalloc() buffer shorter than the response, so nvmet_auth_success1() and
nvmet_auth_failure1() write past the allocation; both only WARN_ON the
short length and then format the message anyway.
Impact: A remote NVMe-oF initiator with access to an auth-enabled target
can trigger a 16-byte heap out-of-bounds write via a one-byte
AUTH_RECEIVE allocation length.
Compute the minimum response length for the current DH-HMAC-CHAP step in
nvmet_auth_receive_data_len() and report a zero data length when the
host-supplied allocation length is shorter, so the existing zero-length
check in nvmet_execute_auth_receive() rejects the command before any
builder runs. The SUCCESS1 minimum is sizeof(struct
nvmf_auth_dhchap_success1_data) plus the HMAC hash length, because the
response hash is written into the rval[] flexible-array tail, so the
minimum is state dependent rather than a flat sizeof. CHALLENGE keeps its
existing variable-length guard in nvmet_auth_challenge().
This is reachable only when in-band DH-HMAC-CHAP authentication is
configured on the target. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-ioctl: fix a possible overflow in list_version_get_info
sizeof(tt->version) is 12 bytes, but the code writes 16 bytes into the
output buffer - info->vers->version[0], info->vers->version[1],
info->vers->version[2] and info->vers->next. This can cause buffer
overflow.
Fix this buffer overflow by replacing "sizeof(tt->version)" with
"sizeof(struct dm_target_versions)". |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ieee80211: validate MLE common info length
ieee80211_mle_common_size() uses the first common-info octet as the
common information length for all known MLE types. However,
ieee80211_mle_size_ok() only validates that octet for Basic, Probe
Request, and TDLS MLEs.
Reconfiguration MLEs also skipped the length octet when calculating the
minimum common size, and Priority Access MLEs skipped validation of the
advertised common information length.
Account for the Reconfiguration common-info length octet and validate
the advertised common information length for all known MLE types. Keep
unknown-type handling unchanged.
[remove now misleading comment] |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Fix buffer over-read in cca_cipher2protkey
Add validation of both the actual key buffer size and token length
fields in all the cca_check_sec*token() functions. Additionally check
in cca_gencipherkey() for possible underflow with returned key size.
The CCA token structures contain user-controlled len fields that
were used in operations without proper validation against both the
actual buffer size and minimum token structure size. An attacker
could set this field larger than the actual buffer size, leading to
reading beyond buffer boundaries. This may result in a kernel crash or
exposure of memory via sending this as part of a request down to the
crypto card. Also an attacker could have used a very small len value
and thus enforce a buffer under-run which may produce similar effects
as a over-read.
So now a key must
- key buf length must be at least sizeof the token struct
- the key len field inside the token must fit into the range of
sizeof key token struct ... key buf length |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Prevent shader BO mappings from becoming writable
vc4_gem_object_mmap() rejects a writable mapping of a validated shader
BO, but leaves VM_MAYWRITE set. Userspace can map the BO read-only and
then turn it writable with mprotect().
Validated shader BOs must stay read-only: the validator checks the
instructions once and the GPU trusts them afterwards. A writable
mapping lets userspace rewrite the code after validation, bypassing the
validator.
Clear VM_MAYWRITE on the read-only path so the mapping cannot be
upgraded, as i915 already does for its read-only objects. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: fix double free and WARN_ON in add_mtd_device() error paths
When device_register() or mtd_nvmem_add() fails inside
add_mtd_device() for a partition, the error handling triggers
mtd_release() via put_device() or device_unregister(). mtd_release()
calls release_mtd_partition() which frees the mtd_info structure.
However, callers such as mtd_add_partition() and add_mtd_partitions()
also call free_partition() in their error paths, resulting in a double
free.
Additionally, release_mtd_partition() hits WARN_ON(!list_empty(
&mtd->part.node)) because the partition node is still linked in the
parent's partitions list when the release callback fires from the
add_mtd_device() error path.
Fix this by overriding dev->type and dev->release before put_device()
in the error paths, so that device_release() invokes a no-op function
instead of mtd_release(). For the mtd_nvmem_add() failure case,
device_unregister() is replaced with device_del() to separate the
device removal from the final kobject reference drop, allowing the
override to take effect before put_device() is called.
The callers' error paths (list_del + free_partition) remain the sole
owners of mtd_info lifetime on add_mtd_device() failure, which is the
expected contract.
The normal partition teardown path is not affected: del_mtd_device()
goes through kref_put() -> mtd_device_release() -> device_unregister()
with dev->type still set to &mtd_devtype, so mtd_release() ->
release_mtd_partition() continues to work correctly for the regular
removal case. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix MCIA register buffer overflow on 32 dword reads
The MCIA register can return up to 32 dwords (128 bytes) when the device
advertises the mcia_32dwords capability, but struct
mlx5_ifc_mcia_reg_bits only defines dword_0..11, leaving room for just
12 dwords (48 bytes) of data.
mlx5_query_mcia() clamps the read size to mlx5_mcia_max_bytes() and then
memcpy()s that many bytes out of the register, potentially reading past
the end of the 'out' buffer. On kernels built with FORTIFY_SOURCE this
is caught as a buffer overflow while reading the module EEPROM via
ethtool:
detected buffer overflow in memcpy
kernel BUG at lib/string_helpers.c:1048!
RIP: 0010:fortify_panic+0x13/0x20
Call Trace:
mlx5_query_mcia.isra.0+0x200/0x210 [mlx5_core]
mlx5_query_module_eeprom_by_page+0x4a/0xa0 [mlx5_core]
mlx5e_get_module_eeprom_by_page+0xbb/0x120 [mlx5_core]
eeprom_prepare_data+0xf3/0x170
ethnl_default_doit+0xf1/0x3b0
Extend the mcia_reg layout to 32 dwords. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/bios: range check LFP Data Block panel_type2
While the panel_type from LFP Data Block is range checked, panel_type2
is not. Add a few helpers for range checking, and use them to not only
check panel_type2, but also improve clarity and correctness in the panel
type selection.
Discovered using AI-assisted static analysis confirmed by Intel Product
Security.
v2:
- Fix commit message typo (Michał)
- Add is_panel_type_pnp() (Ville)
(cherry picked from commit c9ebe5d2f25729d6cfbbb1235d640bf67f9275df) |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: bound DACL dedup walk to copied ACEs
set_ntacl_dacl() can stop copying ACEs before consuming the full input
DACL when size accounting overflows.
When that happens, num_aces reflects only the ACEs that were actually
copied into the output DACL, but set_posix_acl_entries_dacl() still
receives nt_num_aces and uses it to walk the existing ACE array during
dedup.
That makes the dedup walk scan past the copied ACE array and inspect
buffer tail that does not contain valid ACEs.
Split the two meanings currently carried by the NT ACE count. Pass the
number of copied NT ACEs to bound the dedup walk, and preserve the
original "input DACL had NT ACEs" state separately for the
Everyone/default ACL fallback.
This keeps the dedup walk aligned with the ACEs that are actually
present in the rebuilt DACL. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB read in OnAssocRsp() IE loop
The IE parsing loop in OnAssocRsp() advances by (pIE->length + 2) each
iteration but only guards on i < pkt_len. When a malicious AP sends an
AssocResponse whose last IE has only one byte remaining in the frame
(the element_id byte lands at pkt_len-1), the loop reads pIE->length
from pframe[pkt_len], which is one byte past the allocated receive buffer.
Additionally, even when the header bytes are in bounds, pIE->length
itself can extend the data window beyond pkt_len, silently passing a
truncated IE to the handler functions.
Add two guards at the top of the loop body:
1. Break if fewer than sizeof(*pIE) bytes remain (can't read header).
2. Break if the IE's declared data extends past pkt_len. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate NTLMv2 response before updating session key
ksmbd_auth_ntlmv2() derives the NTLMv2 session key into
sess->sess_key before it verifies the NTLMv2 response.
ksmbd_decode_ntlmssp_auth_blob() then continues into KEY_XCH even
when ksmbd_auth_ntlmv2() failed.
With SMB3 multichannel binding, the failed authentication operates on
an existing session and the session setup error path does not expire
binding sessions. A client can send a binding session setup with a
bad NT proof and KEY_XCH and still modify sess->sess_key before
STATUS_LOGON_FAILURE is returned.
Relevant path:
smb2_sess_setup()
-> conn->binding = true
-> ntlm_authenticate()
-> session_user()
-> ksmbd_decode_ntlmssp_auth_blob()
-> ksmbd_auth_ntlmv2()
-> calc_ntlmv2_hash()
-> hmac_md5_usingrawkey(..., sess->sess_key)
-> crypto_memneq() returns mismatch
-> KEY_XCH arc4_crypt(..., sess->sess_key, ...)
-> out_err without expiring the binding session
Derive the base session key into a local buffer and copy it to
sess->sess_key only after the proof matches. Return immediately on
authentication failure so KEY_XCH is only processed after successful
authentication. |
