| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| HTTP::Body versions before 1.23_01 for Perl allow CPU exhaustion via quadratic rescanning of a multipart body with a missing or malformed boundary.
Before the first part, and between parts, the multipart parser searches the whole buffered body for the next boundary. On a miss it keeps everything and searches again from the start when the next chunk arrives. A body with no boundary, or with a delimiter followed by neither CRLF nor "--", is therefore rescanned on every chunk, taking time quadratic in its size.
A remote attacker can exhaust worker CPU with a few such requests. |
| MIME::Parser versions before 5.521 for Perl set no limit on the number of message parts by default, allowing memory exhaustion.
The max_parts option defaulted to -1, which disables the limit, so a parser created with default settings builds an entity for every part however many a message has.
Version 5.521 sets max_parts to 1000 and max_depth to 64 by default. Setting either to -1 still removes the limit. |
| HTTP::Body versions before 1.23_01 for Perl allow CPU exhaustion via quadratic regex backtracking when parsing chunked request bodies.
In chunked mode, used when no content length is given, add() matches each chunk-size line with `/^([\da-fA-F]+).*\x0D\x0A/`. On a line of hex digits whose first LF has no CR before it, the digits and `.*` backtrack against each other, so a single add() takes time quadratic in the line's length. Nothing limits how long the line can be.
A remote attacker can exhaust CPU in applications that pass chunked request bodies to HTTP::Body. |
| HTTP::Body versions before 1.24_01 for Perl allow memory exhaustion via unbounded buffering of chunked request bodies.
In chunked mode, used when no content length is given, add() holds each chunk in memory until all of it has arrived. A line that is not a chunk-size line, a size line without CRLF, or a size too large to fit an integer leaves the parser waiting forever, and every later add() grows the buffer.
A remote attacker can exhaust memory in applications that pass chunked request bodies to HTTP::Body. |
| MIME::Words versions before 5.521 for Perl allow memory exhaustion via repeated "=?" sequences in decode_mimewords.
For each "=?" that does not start a complete encoded word, decode_mimewords appends an error message containing the whole input string to $@. A boundary of 8,000 "=?" pairs (16,000 bytes) adds 8,000 copies of itself to $@, about 128 MB.
From version 5.518, MIME::Parser decodes every multipart boundary this way, so a remote sender can exhaust the memory of the parsing process with one Content-Type header. |
| HTTP::Body versions before 1.23_01 for Perl allow memory exhaustion via an unbounded multipart part header block.
The multipart parser takes everything up to the first blank line after a boundary as the part's header block, with no limit on its size or number of lines. Every line is stored in the part's header hash, so a block of short lines costs about 60 bytes of memory per input byte.
A remote attacker can exhaust worker memory with a single request. |
| An Exposed IOCTL with Insufficient Access Control vulnerability [CWE-782] vulnerability in Fortinet FortiClientWindows 7.4.0 through 7.4.3, FortiClientWindows 7.2.0 through 7.2.9 may allow an authenticated local user to execute unauthorized code via fortips driver. Success of the attack would require bypassing the Windows memory protections such as Heap integrity and HSP. In addition, it requires a valid and running VPN IPSec connection. |
| Several Kafka deserialization paths read a size or count field from input data and use it directly to allocate an array, collection, or byte buffer, with no check against the bytes actually available. A small crafted input can therefore declare a very large size and force a multi-gigabyte allocation. The affected paths are, in Kafka Streams, ProcessorRecordContext (header count), ChangedDeserializer (varint value length), CombinedKeySchema (foreign-key length, which could also produce a negative size), ProcessorMetadata (key length), and AssignmentInfo group-assignment decoding; and, in the clients library, ListDeserializer (used by ListSerde).
Impact:
An attacker can trigger the oversized allocation and raise an OutOfMemoryError that crashes the affected consumer or Kafka Streams thread; the broker and the rest of the cluster are unaffected. The reachable surface depends on the path: writing a crafted record to a Streams application's internal changelog or repartition topics, or committing crafted offset metadata to its consumer group (Streams internal paths); writing a crafted record to any topic that a consumer reads with ListSerde (ListDeserializer); or, as a member of a Streams consumer group, returning crafted assignment data when elected leader (AssignmentInfo). Because a crafted record remains in its topic, the error can recur on restart. The record size limit (max.message.bytes) does not help, because the allocation is driven by a size field rather than by the input's length.
Mitigation:
Upgrade to Apache Kafka 4.2.2, 4.3.2, or 4.4.0. Where authorization is enabled, restrict write access to each application's internal topics and consumer group to its own principal, and restrict who can produce to topics that are consumed with ListSerde.
Resolution:
From Apache Kafka 4.2.2, 4.3.2, and 4.4.0: these deserialization paths validate the declared size against the remaining input before allocating and reject input that fails the check. |
| Use after free in Windows Message Queuing Queue Manager allows an authorized attacker to execute code locally. |
| Missing authentication for critical function in Windows Health and Optimized Experiences Service allows an authorized attacker to elevate privileges locally. |
| Improper privilege management in Windows Internet (wininet.dll) allows an authorized attacker to perform spoofing locally. |
| Untrusted pointer dereference in Windows COM+ Event System Service allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: futex: untag the user pointer before the atomic access
access_ok() checks untagged_addr(uaddr), but arch_futex_atomic_op_inuser()
and futex_atomic_cmpxchg_inatomic() hand the raw uaddr to the inline asm
amoswap/amoadd/.../lr.w+sc.w through the "+m" (*uaddr) operand. When the
tagged address ABI is enabled (CONFIG_RISCV_ISA_SUPM, prctl
PR_SET_TAGGED_ADDR_CTRL with PMLEN != 0), those two addresses differ: a
user pointer whose top PMLEN bits hold a tag passes access_ok() after
untagging, but the atomic is then performed on the still-tagged raw
address.
Supervisor-mode data accesses are not subject to the U-mode pointer
masking (that is governed by menvcfg.PMM, which the kernel does not set),
so hardware does not strip the tag for the kernel's own access. With
Sv57 and PMLEN=16 the tag bits overlap the canonical-address bits, so a
tagged pointer can name a canonical kernel virtual address (e.g. in the
linear map) whose untagged form is a valid user address. An unprivileged
process can thus make FUTEX_WAKE_OP perform an atomic read-modify-write on
an arbitrary kernel address, with the matching FUTEX_OP_CMP_* result
serving as a read oracle.
get_user()/put_user()/raw_copy_{to,from}_user() already untag the pointer
after the access_ok() check; do the same in the futex helpers so the
atomic operates on the address that was actually validated. |
| In the Linux kernel, the following vulnerability has been resolved:
net: skbuff: don't leave stale bytes in skb_copy_and_csum_bits()
When skb_copy_and_csum_bits() reaches unreadable frags it returns 0
after copying only the linear part, and the rest of the caller's buffer
is left as it was. The callers copy into a buffer that is about to go
out on the wire: an ICMP error quoting the offending packet, or a
driver's TX bounce buffer in skb_copy_and_csum_dev(). Neither buffer
is zeroed beforehand, so whatever was in memory there gets sent.
Zero the part of the buffer we didn't fill. The checksum usually
won't match the data any more, so the receiver will usually drop the
packet, but either way it no longer carries anything it shouldn't.
Only zero for a positive @len, a negative one from a broken caller must
not turn into a huge memset(). |
| Heap-based buffer overflow in Microsoft Windows Search Component allows an authorized attacker to elevate privileges locally. |
| Heap-based buffer overflow in Windows Partition Management Driver allows an unauthorized attacker to elevate privileges over a network. |
| Use after free in Windows Bind Filter Driver allows an authorized attacker to elevate privileges locally. |
| Authlib is a Python library which builds OAuth and OpenID Connect servers. Prior to 1.9.1, Authlib's OctKey.import_key() and HMAC signing and verification path accept zero-length key material. If an application's secret lookup can return an empty string or empty bytes, a remote attacker can compute the deterministic HS256, HS384, or HS512 signature for arbitrary token claims and have Authlib treat the token as authentic. This issue is fixed in version 1.9.1. |
| Authlib is a Python library which builds OAuth and OpenID Connect servers. From 1.3.1 until 1.9.0, OctKey.import_key() checks asymmetric-key markers only at byte zero while Authlib's PEM loaders accept leading whitespace, comments, or a byte-order mark. In deployments that use the documented mixed algorithm registry and already configure verification with PEM or certificate bytes containing such a prefix, an unauthenticated attacker who knows those same public-key bytes can use them as an HMAC secret and forge HS256 tokens with arbitrary identity or authorization claims. This is a bypass of the remediation for CVE-2024-37568. The module-level jwt object reaches OctKey.import_key() in authlib/jose/rfc7518/oct_key.py, where POSSIBLE_UNSAFE_KEYS fails to identify prefixed asymmetric key material. This issue is fixed in version 1.9.0. |
| A double free issue was addressed with improved memory management. This issue is fixed in macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. An attacker on the local network may be able to cause unexpected system termination or corrupt process memory. |
