Export limit exceeded: 417330 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (1196 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74518 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix list corruption in allocate_file_region_entries() allocate_file_region_entries() tops up resv->region_cache with freshly allocated file_region descriptors. The allocation uses GFP_KERNEL, so resv->lock is dropped around it: the new entries are gathered on a stack-local list head, allocated_regions, and spliced into resv->region_cache once the lock is re-acquired. The splice used list_splice(), which moves the entries but does not re-initialize the source head, so allocated_regions is left pointing at an entry that now lives on resv->region_cache. The top-up runs in a while loop that re-checks the cache deficit after re-acquiring the lock. For a shared mapping the resv_map is shared by every mapper of the hugetlbfs inode, so a concurrent region_chg()/region_add()/region_del() on the same resv_map can consume cache entries during the unlocked window and force a second iteration. That iteration calls list_add() on the stale head and corrupts the list; with CONFIG_DEBUG_LIST the __list_add_valid() check trips: list_add corruption. next->prev should be prev (ffffc900011ff7f8), but was ffff88814c281460. (next=ffff88814c545640). kernel BUG at lib/list_debug.c:31! allocate_file_region_entries+0x191/0x420 region_chg+0x267/0x300 hugetlb_reserve_pages+0x387/0xc80 hugetlbfs_file_mmap+0x2ce/0x3f0 mmap_region+0x1348/0x1a80 do_mmap+0x85e/0xb90 vm_mmap_pgoff+0x18c/0x330 ksys_mmap_pgoff+0x2a1/0x3e0 do_syscall_64+0xd7/0x420 Without CONFIG_DEBUG_LIST the bad list_add() silently links a kernel-stack address into resv->region_cache, leading to later use-after-free. This was observed as a real host panic on a dense KVM host where a QEMU guest-RAM hugetlbfs file was mapped MAP_SHARED by both QEMU and a separate SPDK/DPDK vhost-user target, generating concurrent region_* traffic on one shared resv_map. Use list_splice_init() so the source head is re-initialized empty after each splice, making the retry loop safe. | ||||
| CVE-2026-74313 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vduse: hold vduse_lock across IDR lookup in open path vduse_dev_open() looks up struct vduse_dev through the IDR and then acquires dev->lock only after vduse_lock has been dropped. This leaves a window where a concurrent VDUSE_DESTROY_DEV can remove the same object from the IDR and free it before the open path locks the device, leading to a use-after-free. Close this race by keeping vduse_lock held until dev->lock has been acquired in the open path, matching the lock ordering already used by the destroy path. | ||||
| CVE-2026-74370 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: liveupdate: fix TOCTOU race in luo_session_retrieve() Extend the scope of the rwsem_read lock in luo_session_retrieve() to overlap with the acquisition of the session mutex. This prevents a concurrent thread from releasing and freeing the session between the lookup and the mutex lock. | ||||
| CVE-2026-71539 | 1 N8n | 1 N8n | 2026-08-21 | N/A |
| n8n is an open source workflow automation platform. Prior to 1.123.64, 2.29.8, and 2.30.1, the Git node clone operation allows an authenticated workflow user to swap a validated directory for a symlink before cloning, planting a crafted repository in the community node directory that loads as a custom JavaScript node after restart and executes arbitrary code on the server. This issue is fixed in versions 1.123.64, 2.29.8, and 2.30.1. | ||||
| CVE-2026-76044 | 1 Google | 1 Chrome | 2026-08-21 | 8.3 High |
| Race condition in USB in Google Chrome prior to 151.0.7922.169 allowed a remote attacker who had compromised the renderer process to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-62941 | 1 Lxc | 1 Incus | 2026-08-21 | 9.9 Critical |
| Incus is a system container and virtual machine manager. Prior to version 7.3.0, when copying an instance across projects, the project restriction check (`AllowInstanceCreation`) runs BEFORE the source instance's configuration is merged into the request. Dangerous configuration keys (including `security.privileged`, `raw.lxc`, `raw.apparmor`) from the source instance are merged AFTER the check passes, bypassing all project restrictions on the target project. Version 7.3.0 patches the issue. | ||||
| CVE-2026-53477 | 1 Dell | 2 Command Update, Dell Command Update (dcu) | 2026-08-21 | 7.8 High |
| Dell Command Update (DCU), versions prior to 5.7.1, contain a Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of Privileges. | ||||
| CVE-2026-56797 | 1 Dell | 2 Command Update, Dell Command Update (dcu) | 2026-08-21 | 7.3 High |
| Dell Command Update (DCU), versions prior to 5.7.1, a Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of Privileges. | ||||
| CVE-2026-64846 | 1 Nixos | 1 Nix | 2026-08-20 | 2.8 Low |
| Nix is a package manager for Linux and other Unix systems. Prior to 2.35.0, a malicious derivation executed with the recursive-nix experimental feature can exploit a time-of-check/time-of-use race involving final symlink handling in the LocalStore restore path. The race can cause writeFile to follow a substituted final symlink when opening a path with O_TRUNC instead of enforcing FinalSymlink::DontFollow, allowing the Nix process or nix-daemon to create or truncate an empty file outside the build sandbox with the daemon user's permissions. The primitive does not provide arbitrary-content writes and requires winning the race. This issue is fixed in version 2.35.0. | ||||
| CVE-2026-16819 | 1 Ibm | 3 Aix, Powervm Vios, Vios | 2026-08-20 | 7.7 High |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a local attacker to cause a denial of service and compromise data integrity due to a time-of-check time-of-use race condition. | ||||
| CVE-2024-13942 | 1 Rockchip | 1 Rk3588s | 2026-08-20 | 7.6 High |
| Secure BootROM of RK3588s SoC is vulnerable to a time-of-check to time-of-use attack in case of booting from external media (SPI NOR or NAND, EMMC or SD). The code reads the header of the next-stage loader twice. The header contains hashes of the executable modules and is signed with a private key, the public part of which is verified against the SHA256 digest blown in the OTP. The first read is only partial and contains only the hashes of the executable modules. The second is complete, including the header signature. Although the header is verified based on the fully read data, the authenticity of the executable modules is checked against the partial data from the first read. An attacker with physical access to a device containing RK3588s SoC can easily modify the next-stage loader data on-the-fly using a low-cost SD-card or SPI NOR/NAND or EMMC emulator. Even a simple ultra low-cost circuit comprising two memory chips (containing the same data but different headers - the original and the modified one) and a multiplexer can be used to carry out an attack. This can lead to arbitrary code execution with the highest privileges available (EL3). This issue affects RK3588s: RK3588s SoC BootROM (secure) 350B20210512V100 and possibly others. As remediation apply mitigations per vendor instructions or discontinue use of the product if mitigations are unavailable https://www.rock-chips.com/a/en/products/RK35_Series/2022/0926/1660.html | ||||
| CVE-2026-20474 | 2 Mediatek, Mediatek, Inc. | 35 Mt6991, Mt6991 Firmware, Mt6993 and 32 more | 2026-08-19 | 6 Medium |
| In display, there is a possible escalation of privilege due to a race condition. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11019183; Issue ID: MSV-7758. | ||||
| CVE-2026-72124 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: can: isotp: serialize TX state transitions under so->rx_lock The TX state machine (so->tx.state) is driven from three contexts: sendmsg() claiming and progressing a transfer, the RX path consuming Flow Control/echo frames, and two hrtimers timing out a stalled transfer. Mixing a lock-free cmpxchg() claim in sendmsg() with hrtimer_cancel() calls made under so->rx_lock elsewhere left windows where a frame or timer callback could act on a state that had already moved on, corrupting an unrelated transfer. so->rx_lock now covers the full lifecycle of a TX claim: sendmsg() takes it to check so->tx.state is ISOTP_IDLE, switch it to ISOTP_SENDING, bump so->tx_gen and drain the previous transfer's timers - all as one critical section. isotp_rcv_fc()/isotp_rcv_cf() already run under this lock via isotp_rcv(), and isotp_rcv_echo() now takes it itself, so none of them can ever observe a transfer mid-claim. This also means a transfer can no longer be handed to sendmsg()'s cleanup paths (signal or send error) while another thread is concurrently claiming or finishing it, so those paths can cancel timers and reset the state unconditionally. isotp_release() claims the socket the same way, so a racing sendmsg() sees a consistent ISOTP_SHUTDOWN and skips arming its timer or sending. Only the hrtimer callbacks stay outside so->rx_lock, since they run under so->rx_lock's cancellation elsewhere and taking it themselves would deadlock. so->tx_gen lets them recognize whether the transfer they timed out is still the one currently active, so they don't report an error against a transfer that has since completed or been superseded. | ||||
| CVE-2026-72121 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: add locking when updating filter and timer values KCSAN detected a simultaneous access to timer values that can be overwritten in bcm_rx_setup() when updating timer and filter content while bcm_rx_handler(), bcm_rx_timeout_handler() or bcm_rx_thr_handler() run concurrently on incoming CAN traffic. Protect the timer (ival1/ival2/kt_ival1/kt_ival2/kt_lastmsg) and filter (nframes/flags/frames/last_frames) updates in bcm_rx_setup() with a new per-op bcm_rx_update_lock, taken with the matching scope in the RX handlers. memcpy_from_msg() is staged into a temporary buffer before the lock is taken, since it can sleep and must not run under a spinlock. hrtimer_cancel() is always called without bcm_rx_update_lock held, since bcm_rx_timeout_handler()/bcm_rx_thr_handler() take the same lock and a running callback would otherwise deadlock against the canceller. Also close a related race: bcm_rx_setup() cleared the RTR flag in the stored reply frame's can_id as a separate, unprotected step after the frame content was already installed, so a concurrent bcm_rx_handler() could transmit a stale reply with CAN_RTR_FLAG still set. Fold that normalization into the initial frame preparation instead (on the staged buffer for updates, directly on op->frames pre-registration for new ops), so the installed frame is always atomically self-consistent. bcm_rx_handler()'s RX_RTR_FRAME check now takes a lock-protected snapshot of op->flags before deciding whether to call bcm_can_tx(), but does not hold the lock across that call. Also take a lock-protected snapshot of the currframe in bcm_can_tx() to avoid partly overwrites by content updates in bcm_tx_setup(). Finally check if a TX_RESET_MULTI_IDX/SETTIMER might have reset op->currframe between the two locked sections in bcm_can_tx(). Omit calling hrtimer_forward() with zero interval in bcm_rx_thr_handler(). kt_ival2 may have been concurrently cleared by bcm_rx_setup() before it cancels this timer, so check kt_ival2 inside the bcm_rx_update_lock. | ||||
| CVE-2026-23394 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Give up GC if MSG_PEEK intervened. Igor Ushakov reported that GC purged the receive queue of an alive socket due to a race with MSG_PEEK with a nice repro. This is the exact same issue previously fixed by commit cbcf01128d0a ("af_unix: fix garbage collect vs MSG_PEEK"). After GC was replaced with the current algorithm, the cited commit removed the locking dance in unix_peek_fds() and reintroduced the same issue. The problem is that MSG_PEEK bumps a file refcount without interacting with GC. Consider an SCC containing sk-A and sk-B, where sk-A is close()d but can be recv()ed via sk-B. The bad thing happens if sk-A is recv()ed with MSG_PEEK from sk-B and sk-B is close()d while GC is checking unix_vertex_dead() for sk-A and sk-B. GC thread User thread --------- ----------- unix_vertex_dead(sk-A) -> true <------. \ `------ recv(sk-B, MSG_PEEK) invalidate !! -> sk-A's file refcount : 1 -> 2 close(sk-B) -> sk-B's file refcount : 2 -> 1 unix_vertex_dead(sk-B) -> true Initially, sk-A's file refcount is 1 by the inflight fd in sk-B recvq. GC thinks sk-A is dead because the file refcount is the same as the number of its inflight fds. However, sk-A's file refcount is bumped silently by MSG_PEEK, which invalidates the previous evaluation. At this moment, sk-B's file refcount is 2; one by the open fd, and one by the inflight fd in sk-A. The subsequent close() releases one refcount by the former. Finally, GC incorrectly concludes that both sk-A and sk-B are dead. One option is to restore the locking dance in unix_peek_fds(), but we can resolve this more elegantly thanks to the new algorithm. The point is that the issue does not occur without the subsequent close() and we actually do not need to synchronise MSG_PEEK with the dead SCC detection. When the issue occurs, close() and GC touch the same file refcount. If GC sees the refcount being decremented by close(), it can just give up garbage-collecting the SCC. Therefore, we only need to signal the race during MSG_PEEK with a proper memory barrier to make it visible to the GC. Let's use seqcount_t to notify GC when MSG_PEEK occurs and let it defer the SCC to the next run. This way no locking is needed on the MSG_PEEK side, and we can avoid imposing a penalty on every MSG_PEEK unnecessarily. Note that we can retry within unix_scc_dead() if MSG_PEEK is detected, but we do not do so to avoid hung task splat from abusive MSG_PEEK calls. | ||||
| CVE-2026-70667 | 1 Netflix | 1 Lemur | 2026-08-19 | 6.3 Medium |
| Lemur manages TLS certificate creation. Prior to 1.9.3, _validate_revocation_url in lemur/certificates/verify.py checked the original CRL or OCSP URL but the later request could reach a different destination. The CRL requests.get call followed HTTP redirects without validating each Location target, so a public attacker-controlled URL could redirect to loopback, RFC1918, link-local, or instance-metadata addresses. Validation and connection also performed separate DNS resolutions, creating a time-of-check time-of-use window for DNS rebinding on both CRL and OCSP paths. An operator uploading a certificate through POST /api/1/certificates/upload could therefore induce blind internal requests despite the earlier mitigation. The fix disables redirects and pins validated addresses while preserving the correct Host value. This issue is fixed in version 1.9.3. | ||||
| CVE-2026-19975 | 1 Azuriom | 1 Cms | 2026-08-19 | 3.1 Low |
| A weakness has been identified in Azuriom CMS up to 1.2.12. This issue affects the function transferMoney of the file app/Http/Controllers/ProfileController.php of the component Money Transfer Handler. This manipulation causes time-of-check time-of-use. The attack may be initiated remotely. A high degree of complexity is needed for the attack. The exploitability is assessed as difficult. Upgrading to version 1.2.13 is capable of addressing this issue. Patch name: ae5596a9548e010a8a79838806eff60ef9554539. Upgrading the affected component is advised. The vendor was contacted early about this disclosure. | ||||
| CVE-2026-20492 | 2 Mediatek, Mediatek, Inc. | 13 Mt2735, Mt2735 Firmware, Mt2737 and 10 more | 2026-08-19 | 5.5 Medium |
| In Audio HAL, there is a possible system becoming unresponsive due to a race condition. This could lead to local denial of service with User execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS10960026 (Note: For MT6880, MT6890, MT6990, MT6988) / AUTO00851250 (Note: For MT2735, MT2737); Issue ID: MSV-7583. | ||||
| CVE-2026-29518 | 2 Rsync Project, Samba | 2 Rsync, Rsync | 2026-08-19 | 7 High |
| Rsync versions before 3.4.3 contain a time-of-check to time-of-use (TOCTOU) race condition in daemon file handling that allows attackers to redirect file writes outside intended directories by replacing parent directory components with symbolic links. Attackers with write access to a module path can exploit this race condition to create or overwrite arbitrary files, potentially modifying sensitive system files and achieving privilege escalation when the daemon runs with elevated privileges. This vulnerability can only be triggered if the chroot setting is false. | ||||
| CVE-2026-72418 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conncount: prevent connlimit drops for early confirmed ct Commit 69894e5b4c5e ("netfilter: nft_connlimit: update the count if add was skipped") introduced a regression where packets for valid connections are dropped when using connlimit for soft-limiting scenarios. The issue occurs when a new connection reuses a socket currently in the TIME_WAIT state. In this scenario, the connection tracking entry is evaluated as already confirmed. Previously, __nf_conncount_add() assumed that if a connection was confirmed and did not originate from the loopback interface, it should skip the addition and return -EEXIST. Skipping the addition triggers a garbage collection run that cleans up the TIME_WAIT connection. Consequently, the active connection count drops to 0, which xt_connlimit mishandles, leading to the false rejection of the perfectly valid new connection. Fix this by replacing the interface check with protocol-agnostic state checks. We now skip the tree insertion and preserve the lockless garbage collection optimization only if the connection is IPS_ASSURED. This allows early-confirmed setup packets (such as reused TIME_WAIT sockets or locally generated SYN-ACKs) to be properly evaluated and counted without falsely dropping. The goto check_connections path is maintained to ensure these setup packets are deduplicated correctly. This has been tested with slowhttptest and HTTP server configured locally to ensure we are not breaking soft-limiting scenarios for local or external connections. In addition, it was tested with a OVS zone limit too. | ||||