| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Multer is a node.js middleware for handling `multipart/form-data`. Versions prior to 2.0.0 are vulnerable to a resource exhaustion and memory leak issue due to improper stream handling. When the HTTP request stream emits an error, the internal `busboy` stream is not closed, violating Node.js stream safety guidance. This leads to unclosed streams accumulating over time, consuming memory and file descriptors. Under sustained or repeated failure conditions, this can result in denial of service, requiring manual server restarts to recover. All users of Multer handling file uploads are potentially impacted. Users should upgrade to 2.0.0 to receive a patch. No known workarounds are available. |
| A vulnerability in the local interface of Cisco BroadWorks Network Server could allow an unauthenticated, remote attacker to exhaust system resources, causing a denial of service (DoS) condition.
This vulnerability exists because rate limiting does not occur for certain incoming TCP connections. An attacker could exploit this vulnerability by sending a high rate of TCP connections to the server. A successful exploit could allow the attacker to cause TCP connection resources to grow rapidly until the Cisco BroadWorks Network Server becomes unusable.
Note: To recover from this vulnerability, either Cisco BroadWorks Network Server software must be restarted or the Cisco BroadWorks Network Server node must be rebooted. For more information, see the section of this advisory.
Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. |
| NVIDIA Jetson Linux and IGX OS contain a vulnerability in NvMap, where improper tracking of memory allocations could allow a local attacker to cause memory overallocation. A successful exploitation of this vulnerability might lead to denial of service. |
| A flaw was found in the Hive hibernation controller component of OpenShift Dedicated. The ClusterDeployment.hive.openshift.io/v1 resource can be created with the spec.installed field set to true, regardless of the installation status, and a positive timespan for the spec.hibernateAfter value. If a ClusterSync.hiveinternal.openshift.io/v1alpha1 resource is also created, the hive hibernation controller will enter the reconciliation loop leading to a panic when accessing a non-existing field in the ClusterDeployment’s status section, resulting in a denial of service. |
| s3-url-parser 1.0.3 is vulnerable to Denial of service via the regexes component. |
| An issue in the HistoryQosPolicy component of FastDDS v2.12.x, v2.11.x, v2.10.x, and v2.6.x leads to a SIGABRT (signal abort) upon receiving DataWriter's data. |
| Botan is a C++ cryptography library. X.509 certificates can identify elliptic curves using either an object identifier or using explicit encoding of the parameters. Prior to 3.5.0 and 2.19.5, checking name constraints in X.509 certificates is quadratic in the number of names and name constraints. An attacker who presented a certificate chain which contained a very large number of names in the SubjectAlternativeName, signed by a CA certificate which contained a large number of name constraints, could cause a denial of service. The problem has been addressed in Botan 3.5.0 and a partial backport has also been applied and is included in Botan 2.19.5. |
| Botan is a C++ cryptography library. X.509 certificates can identify elliptic curves using either an object identifier or using explicit encoding of the parameters. Prior to versions 3.3.0 and 2.19.4, an attacker could present an ECDSA X.509 certificate using explicit encoding where the parameters are very large. The proof of concept used a 16Kbit prime for this purpose. When parsing, the parameter is checked to be prime, causing excessive computation. This was patched in 2.19.4 and 3.3.0 to allow the prime parameter of the elliptic curve to be at most 521 bits. No known workarounds are available. Note that support for explicit encoding of elliptic curve parameters is deprecated in Botan. |
| An issue in taurusxin ncmdump v1.3.2 allows attackers to cause a Denial of Service (DoS) via memory exhaustion by supplying a crafted .ncm file |
| Minder is a software supply chain security platform. Prior to version 0.0.49, the Minder REST ingester is vulnerable to a denial of service attack via an attacker-controlled REST endpoint that can crash the Minder server. The REST ingester allows users to interact with REST endpoints to fetch data for rule evaluation. When fetching data with the REST ingester, Minder sends a request to an endpoint and will use the data from the body of the response as the data to evaluate against a certain rule. If the response is sufficiently large, it can drain memory on the machine and crash the Minder server. The attacker can control the remote REST endpoints that Minder sends requests to, and they can configure the remote REST endpoints to return responses with large bodies. They would then instruct Minder to send a request to their configured endpoint that would return the large response which would crash the Minder server. Version 0.0.49 fixes this issue. |
| If a server hosts a zone containing a "KEY" Resource Record, or a resolver DNSSEC-validates a "KEY" Resource Record from a DNSSEC-signed domain in cache, a client can exhaust resolver CPU resources by sending a stream of SIG(0) signed requests.
This issue affects BIND 9 versions 9.0.0 through 9.11.37, 9.16.0 through 9.16.50, 9.18.0 through 9.18.27, 9.19.0 through 9.19.24, 9.9.3-S1 through 9.11.37-S1, 9.16.8-S1 through 9.16.49-S1, and 9.18.11-S1 through 9.18.27-S1. |
| Minder is a software supply chain security platform. Prior to version 0.0.50, Minder engine is susceptible to a denial of service from memory exhaustion that can be triggered from maliciously created templates. Minder engine uses templating to generate strings for various use cases such as URLs, messages for pull requests, descriptions for advisories. In some cases can the user control both the template and the params for it, and in a subset of these cases, Minder reads the generated template entirely into memory. When Minders templating meets both of these conditions, an attacker is able to generate large enough templates that Minder will exhaust memory and crash. This vulnerability is fixed in 0.0.50. |
| golang-jwt is a Go implementation of JSON Web Tokens. Starting in version 3.2.0 and prior to versions 5.2.2 and 4.5.2, the function parse.ParseUnverified splits (via a call to strings.Split) its argument (which is untrusted data) on periods. As a result, in the face of a malicious request whose Authorization header consists of Bearer followed by many period characters, a call to that function incurs allocations to the tune of O(n) bytes (where n stands for the length of the function's argument), with a constant factor of about 16. This issue is fixed in 5.2.2 and 4.5.2. |
| Malicious or unintentional API requests can be used to add significant amount of data to caches. Caches may evict information that is required to operate the web frontend, which leads to unavailability of the component. Please deploy the provided updates and patch releases. No publicly available exploits are known |
| Rubygems.org is the Ruby community's gem hosting service. A Gem publisher can cause a Remote DoS when publishing a Gem. This is due to how Ruby reads the Manifest of Gem files when using Gem::Specification.from_yaml. from_yaml makes use of SafeYAML.load which allows YAML aliases inside the YAML-based metadata of a gem. YAML aliases allow for Denial of Service attacks with so-called `YAML-bombs` (comparable to Billion laughs attacks). This was patched. There is is no action required by users. This issue is also tracked as GHSL-2024-001 and was discovered by the GitHub security lab. |
| kin-openapi is a Go project for handling OpenAPI files. Prior to 0.131.0, when validating a request with a multipart/form-data schema, if the OpenAPI schema allows it, an attacker can upload a crafted ZIP file (e.g., a ZIP bomb), causing the server to consume all available system memory. The root cause comes from the ZipFileBodyDecoder, which is registered automatically by the module (contrary to what the documentation says). This vulnerability is fixed in 0.131.0. |
| A vulnerability, which was classified as problematic, has been found in Khronos Group glslang 15.1.0. Affected by this issue is the function glslang::TIntermediate::isConversionAllowed of the file glslang/MachineIndependent/Intermediate.cpp. The manipulation leads to null pointer dereference. The attack needs to be approached locally. The exploit has been disclosed to the public and may be used. |
| An authenticated attacker can compromise the availability of the device via the network |
| A vulnerability was found in GL.iNet GL-A1300 Slate Plus, GL-AR300M16 Shadow, GL-AR300M Shadow, GL-AR750 Creta, GL-AR750S-EXT Slate, GL-AX1800 Flint, GL-AXT1800 Slate AX, GL-B1300 Convexa-B, GL-B3000 Marble, GL-BE3600 Slate 7, GL-E750, GL-E750V2 Mudi, GL-MT300N-V2 Mango, GL-MT1300 Beryl, GL-MT2500 Brume 2, GL-MT3000 Beryl AX, GL-MT6000 Flint 2, GL-SFT1200 Opal, GL-X300B Collie, GL-X750 Spitz, GL-X3000 Spitz AX, GL-XE300 Puli and GL-XE3000 Puli AX 4.x. It has been declared as problematic. This vulnerability affects unknown code of the component API. The manipulation leads to inefficient regular expression complexity. It is recommended to upgrade the affected component. |
| Resolver caches and authoritative zone databases that hold significant numbers of RRs for the same hostname (of any RTYPE) can suffer from degraded performance as content is being added or updated, and also when handling client queries for this name.
This issue affects BIND 9 versions 9.11.0 through 9.11.37, 9.16.0 through 9.16.50, 9.18.0 through 9.18.27, 9.19.0 through 9.19.24, 9.11.4-S1 through 9.11.37-S1, 9.16.8-S1 through 9.16.50-S1, and 9.18.11-S1 through 9.18.27-S1. |
