| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| slab is a pre-allocated storage for a uniform data type. In version 0.4.10, the get_disjoint_mut method incorrectly checked if indices were within the slab's capacity instead of its length, allowing access to uninitialized memory. This could lead to undefined behavior or potential crashes. This has been fixed in slab 0.4.11. A workaround for this issue involves to avoid using get_disjoint_mut with indices that might be beyond the slab's actual length. |
| A vulnerability classified as critical has been found in FNKvision FNK-GU2 up to 40.1.7. Affected is an unknown function of the component UART Interface. The manipulation leads to on-chip debug and test interface with improper access control. It is possible to launch the attack on the physical device. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. |
| A vulnerability classified as problematic was found in MindSpore 2.5.0. Affected by this vulnerability is the function mindspore.numpy.fft.hfftn. The manipulation leads to memory corruption. It is possible to launch the attack on the local host. The exploit has been disclosed to the public and may be used. |
| A vulnerability was determined in axboe fio up to 3.41. This impacts the function __parse_jobs_ini of the file init.c. Executing manipulation can lead to use after free. The attack needs to be launched locally. The exploit has been publicly disclosed and may be utilized. |
| z2d is a pure Zig 2D graphics library. Versions of z2d after `0.5.1` and up to and including `0.6.0`, when writing from one surface to another using `z2d.compositor.StrideCompositor.run`, and higher-level operations when the anti-aliasing mode is set to `.default` (such as `Context.fill`, `Context.stroke`, `painter.fill`, and `painter.stroke`), the source surface can be completely out-of-bounds on the x-axis, but not on the y-axis, by way of a negative offset. This results in an overflow of the value controlling the length of the stride. In non-safe optimization modes (consumers compiling with `ReleaseFast` or `ReleaseSmall`), this could potentially lead to invalid memory accesses or corruption.
This issue is patched in version `0.6.1`. Users on an untagged version after `v0.5.1` and before `v0.6.1` are advised to update to address the vulnerability. Those still on Zig `0.13.0` are recommended to downgrade to `v0.5.1`. |
| The Apollo Router Core is a configurable, high-performance graph router written in Rust to run a federated supergraph that uses Apollo Federation 2. Prior to 1.61.2 and 2.1.1, the operation limits plugin uses unsigned 32-bit integers to track limit counters (e.g. for a query's height). If a counter exceeded the maximum value for this data type (4,294,967,295), it wrapped around to 0, unintentionally allowing queries to bypass configured thresholds. This could occur for large queries if the payload limit were sufficiently increased, but could also occur for small queries with deeply nested and reused named fragments. This has been remediated in apollo-router versions 1.61.2 and 2.1.1. |
| The ventilator's microcontroller lacks memory protection. An attacker could connect to the internal JTAG interface and read or write to flash memory using an off-the-shelf debugging tool, which could disrupt the function of the device and/or cause unauthorized information disclosure. |
| A vulnerability, which was classified as problematic, has been found in MindSpore 2.5.0. Affected by this issue is the function mindspore.numpy.fft.rfft2. The manipulation leads to memory corruption. The attack needs to be approached locally. The exploit has been disclosed to the public and may be used. |
| A vulnerability, which was classified as critical, has been found in TA-Lib up to 0.6.4. This issue affects the function setInputBuffer of the file src/tools/ta_regtest/ta_test_func/test_minmax.c of the component ta_regtest. The manipulation leads to out-of-bounds write. It is possible to launch the attack on the local host. The exploit has been disclosed to the public and may be used. The identifier of the patch is 5879180e9070ec35d52948f2f57519713256a0f1. It is recommended to apply a patch to fix this issue. |
| A vulnerability was found in Novastar CX40 up to 2.44.0. It has been rated as critical. This issue affects the function getopt of the file /usr/nova/bin/netconfig of the component NetFilter Utility. The manipulation of the argument cmd/netmask/pipeout/nettask leads to stack-based buffer overflow. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A weakness has been identified in bftpd up to 6.2. Impacted is the function expand_groups of the file options.c of the component Configuration File Handler. Executing a manipulation can lead to heap-based buffer overflow. It is possible to launch the attack on the local host. Attacks of this nature are highly complex. The exploitability is considered difficult. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in MicroDicom DICOM Viewer 2025.1 Build 3321. It has been classified as critical. Affected is an unknown function of the file mDicom.exe. The manipulation leads to memory corruption. The attack needs to be approached locally. It is recommended to upgrade the affected component. The vendor quickly confirmed the existence of the vulnerability and fixed it in the latest beta. |
| Improper buffer restrictions in PlatformPfrDxe driver in UEFI firmware for some Intel(R) Server D50FCP Family products may allow a privileged user to enable escalation of privilege via local access. |
| A vulnerability was found in AcademySoftwareFoundation OpenColorIO up to 2.5.0. This issue affects the function ConvertToRegularExpression of the file src/OpenColorIO/FileRules.cpp. Performing a manipulation results in out-of-bounds read. The attack needs to be approached locally. The exploit has been made public and could be used. The patch is named ebdbb75123c9d5f4643e041314e2bc988a13f20d. To fix this issue, it is recommended to deploy a patch. The fix was added to the 2.5.1 milestone. |
| Improper Restriction of Operations within the Bounds of a Memory Buffer vulnerability in Western Digital My Cloud ddns-start on Linux allows Overflow Buffers.This issue affects My Cloud: before 5.29.102. |
| A vulnerability has been identified in Cerberus PRO EN Engineering Tool (All versions), Cerberus PRO EN Fire Panel FC72x IP6 (All versions), Cerberus PRO EN Fire Panel FC72x IP7 (All versions), Cerberus PRO EN Fire Panel FC72x IP8 (All versions < IP8 SR4), Cerberus PRO EN X200 Cloud Distribution IP7 (All versions), Cerberus PRO EN X200 Cloud Distribution IP8 (All versions < V4.3.5618), Cerberus PRO EN X300 Cloud Distribution IP7 (All versions), Cerberus PRO EN X300 Cloud Distribution IP8 (All versions < V4.3.5617), Cerberus PRO UL Compact Panel FC922/924 (All versions < MP4), Cerberus PRO UL Engineering Tool (All versions < MP4), Cerberus PRO UL X300 Cloud Distribution (All versions < V4.3.0001), Desigo Fire Safety UL Compact Panel FC2025/2050 (All versions < MP4), Desigo Fire Safety UL Engineering Tool (All versions < MP4), Desigo Fire Safety UL X300 Cloud Distribution (All versions < V4.3.0001), Sinteso FS20 EN Engineering Tool (All versions), Sinteso FS20 EN Fire Panel FC20 MP6 (All versions), Sinteso FS20 EN Fire Panel FC20 MP7 (All versions), Sinteso FS20 EN Fire Panel FC20 MP8 (All versions < MP8 SR4), Sinteso FS20 EN X200 Cloud Distribution MP7 (All versions), Sinteso FS20 EN X200 Cloud Distribution MP8 (All versions < V4.3.5618), Sinteso FS20 EN X300 Cloud Distribution MP7 (All versions), Sinteso FS20 EN X300 Cloud Distribution MP8 (All versions < V4.3.5617), Sinteso Mobile (All versions). The network communication library in affected systems improperly handles memory buffers when parsing X.509 certificates.
This could allow an unauthenticated remote attacker to crash the network service. |
| Improper buffer restrictions in the UEFI firmware for some Intel(R) Processors may allow a privileged user to potentially enable information disclosure via local access. |
| Improper buffer restrictions in some Intel(R) System Security Report and System Resources Defense firmware may allow a privileged user to potentially enable escalation of privilege via local access. |
| Improper buffer restrictions in some Intel(R) System Security Report and System Resources Defense firmware may allow a privileged user to potentially enable escalation of privilege via local access. |
| cgi.c in weborf .0.17, 0.18, 0.19, and 0.20 (before 1.0) lacks '\0' termination of the path for CGI scripts because strncpy is misused. |
