| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: Allow per function PCI slots to fix slot reset on s390
On s390 systems, which use a machine level hypervisor, PCI devices are
always accessed through a form of PCI pass-through which fundamentally
operates on a per PCI function granularity. This is also reflected in the
s390 PCI hotplug driver which creates hotplug slots for individual PCI
functions. Its reset_slot() function, which is a wrapper for
zpci_hot_reset_device(), thus also resets individual functions.
Currently, the pci_create_slot() assigns the same pci_slot object to
multifunction devices. This approach worked fine on s390 systems that only
exposed virtual functions as individual PCI domains to the operating
system. Since commit 44510d6fa0c0 ("s390/pci: Handling multifunctions")
s390 supports exposing the topology of multifunction PCI devices by
grouping them in a shared PCI domain. This creates a problem when resetting
a function through the hotplug driver's slot_reset() interface.
When attempting to reset a function through the hotplug driver, the shared
slot assignment causes the wrong function to be reset instead of the
intended one. It also leaks memory as we do create a pci_slot object for
the function, but don't correctly free it in pci_slot_release().
Add a flag for struct pci_slot to allow per function PCI slots for
functions managed through a hypervisor, which exposes individual PCI
functions while retaining the topology. Since we can use all 8 bits for
slot 'number' (for ARI devices), change slot 'number' u16 to account for
special values PCI_SLOT_PLACEHOLDER and PCI_SLOT_ALL_DEVICES. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: module: call ethnl_ops_complete() on module flash errors
When validate() fails we are skipping over ethnl_ops_complete()
even tho we already called ethnl_ops_begin(). |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: only release the dirty pages io tree after successful writes
[WARNING]
With extra warning on dirty extent buffers at umount (aka, the next
patch in the series), test case generic/388 can trigger the following
warning about dirty extent buffers at unmount time:
BTRFS critical (device dm-2 state E): emergency shutdown
BTRFS error (device dm-2 state E): error while writing out transaction: -30
BTRFS warning (device dm-2 state E): Skipping commit of aborted transaction.
BTRFS error (device dm-2 state EA): Transaction 9 aborted (error -30)
BTRFS: error (device dm-2 state EA) in cleanup_transaction:2068: errno=-30 Readonly filesystem
BTRFS info (device dm-2 state EA): forced readonly
BTRFS info (device dm-2 state EA): last unmount of filesystem 4fbf2e15-f941-49a0-bc7c-716315d2777c
------------[ cut here ]------------
WARNING: disk-io.c:3311 at invalidate_and_check_btree_folios+0xfd/0x1ca [btrfs], CPU#8: umount/914368
CPU: 8 UID: 0 PID: 914368 Comm: umount Tainted: G OE 7.1.0-rc1-custom+ #372 PREEMPT(full) 2de38db8d1deae71fde295430a0ff3ab98ccf596
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:invalidate_and_check_btree_folios+0xfd/0x1ca [btrfs]
Call Trace:
<TASK>
close_ctree+0x52e/0x574 [btrfs d2f0b1cd330d1287e7a9919d112eadfc0e914efd]
generic_shutdown_super+0x89/0x1a0
kill_anon_super+0x16/0x40
btrfs_kill_super+0x16/0x20 [btrfs d2f0b1cd330d1287e7a9919d112eadfc0e914efd]
deactivate_locked_super+0x2d/0xb0
cleanup_mnt+0xdc/0x140
task_work_run+0x5a/0xa0
exit_to_user_mode_loop+0x123/0x4b0
do_syscall_64+0x243/0x7c0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
---[ end trace 0000000000000000 ]---
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30539776 owner 9 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30621696 owner 257 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30638080 owner 258 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30654464 owner 7 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30703616 owner 2 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30720000 owner 10 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30736384 owner 4 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30752768 owner 11 gen 9 refs 2 flags 0x7
I'm using a stripped down version, which seems to trigger the warning
more reliably:
_fsstress_pid=""
workload()
{
dmesg -C
mkfs.btrfs -f -K $dev > /dev/null
echo 1 > /sys/kernel/debug/clear_warn_once
mount $dev $mnt
$fsstress -w -n 1024 -p 4 -d $mnt &
_fsstress_pid=$!
sleep 0
$godown $mnt
pkill --echo -PIPE fsstress > /dev/null
wait $_fsstress_pid
unset _fsstress_pid
umount $mnt
if dmesg | grep -q "WARNING"; then
fail
fi
}
for (( i = 0; i < $runtime; i++ )); do
echo "=== $i/$runtime ==="
workload
done
[CAUSE]
Inside btrfs_write_and_wait_transaction(), we first try to write all
dirty ebs, then wait for them to finish.
After that we call btrfs_extent_io_tree_release() to free all
extent states from dirty_pages io tree.
However if we hit an error from btrfs_write_marked_extent(), then we
still call btrfs_extent_io_tree_release() to clear that dirty_pages io
tree, which may contain dirty records that we haven't yet submitted.
Furthermore, the later transaction cleanup path will utilize that
dirty_pages io tree to properly cleanup those dirty ebs, but since it's
already empty, no dirty ebs are properly cleaned up, thus will later
trigger the warnings inside invalidate_btree_folios().
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
spi: mpc52xx: fix controller deregistration
Make sure to deregister the controller before disabling and releasing
underlying resources like interrupts and gpios during driver unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: chipidea: udc: fix DMA and SG cleanup in _ep_nuke()
The ChipIdea UDC driver can encounter "not page aligned sg buffer"
errors when a USB device is reconnected after being disconnected
during an active transfer. This occurs because _ep_nuke() returns
requests to the gadget layer without properly unmapping DMA buffers
or cleaning up scatter-gather bounce buffers.
Root cause:
When a disconnect happens during a multi-segment DMA transfer, the
request's num_mapped_sgs field and sgt.sgl pointer remain set with
stale values. The request is returned to the gadget driver with status
-ESHUTDOWN but still has active DMA state. If the gadget driver reuses
this request on reconnect without reinitializing it, the stale DMA
state causes _hardware_enqueue() to skip DMA mapping (seeing non-zero
num_mapped_sgs) and attempt to use freed/invalid DMA addresses,
leading to alignment errors and potential memory corruption.
The normal completion path via _hardware_dequeue() properly calls
usb_gadget_unmap_request_by_dev() and sglist_do_debounce() before
returning the request. The _ep_nuke() path must do the same cleanup
to ensure requests are returned in a clean, reusable state.
Fix:
Add DMA unmapping and bounce buffer cleanup to _ep_nuke() to mirror
the cleanup sequence in _hardware_dequeue():
- Call usb_gadget_unmap_request_by_dev() if num_mapped_sgs is set
- Call sglist_do_debounce() with copy=false if bounce buffer exists
This ensures that when requests are returned due to endpoint shutdown,
they don't retain stale DMA mappings. The 'false' parameter to
sglist_do_debounce() prevents copying data back (appropriate for
shutdown path where transfer was aborted). |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_eem: Fix net_device lifecycle with device_move
The net_device is allocated during function instance creation and
registered during the bind phase with the gadget device as its sysfs
parent. When the function unbinds, the parent device is destroyed, but
the net_device survives, resulting in dangling sysfs symlinks:
console:/ # ls -l /sys/class/net/usb0
lrwxrwxrwx ... /sys/class/net/usb0 ->
/sys/devices/platform/.../gadget.0/net/usb0
console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0
ls: .../gadget.0/net/usb0: No such file or directory
Use device_move() to reparent the net_device between the gadget device
tree and /sys/devices/virtual across bind and unbind cycles. During the
final unbind, calling device_move(NULL) moves the net_device to the
virtual device tree before the gadget device is destroyed. On rebinding,
device_move() reparents the device back under the new gadget, ensuring
proper sysfs topology and power management ordering.
To maintain compatibility with legacy composite drivers (e.g., multi.c),
the bound flag is used to indicate whether the network device is shared
and pre-registered during the legacy driver's bind phase. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: do proper folio cleanup when cow_file_range() failed
[BUG]
When testing with COW fixup marked as BUG_ON() (this is involved with the
new pin_user_pages*() change, which should not result new out-of-band
dirty pages), I hit a crash triggered by the BUG_ON() from hitting COW
fixup path.
This BUG_ON() happens just after a failed btrfs_run_delalloc_range():
BTRFS error (device dm-2): failed to run delalloc range, root 348 ino 405 folio 65536 submit_bitmap 6-15 start 90112 len 106496: -28
------------[ cut here ]------------
kernel BUG at fs/btrfs/extent_io.c:1444!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
CPU: 0 UID: 0 PID: 434621 Comm: kworker/u24:8 Tainted: G OE 6.12.0-rc7-custom+ #86
Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022
Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs]
pc : extent_writepage_io+0x2d4/0x308 [btrfs]
lr : extent_writepage_io+0x2d4/0x308 [btrfs]
Call trace:
extent_writepage_io+0x2d4/0x308 [btrfs]
extent_writepage+0x218/0x330 [btrfs]
extent_write_cache_pages+0x1d4/0x4b0 [btrfs]
btrfs_writepages+0x94/0x150 [btrfs]
do_writepages+0x74/0x190
filemap_fdatawrite_wbc+0x88/0xc8
start_delalloc_inodes+0x180/0x3b0 [btrfs]
btrfs_start_delalloc_roots+0x174/0x280 [btrfs]
shrink_delalloc+0x114/0x280 [btrfs]
flush_space+0x250/0x2f8 [btrfs]
btrfs_async_reclaim_data_space+0x180/0x228 [btrfs]
process_one_work+0x164/0x408
worker_thread+0x25c/0x388
kthread+0x100/0x118
ret_from_fork+0x10/0x20
Code: aa1403e1 9402f3ef aa1403e0 9402f36f (d4210000)
---[ end trace 0000000000000000 ]---
[CAUSE]
That failure is mostly from cow_file_range(), where we can hit -ENOSPC.
Although the -ENOSPC is already a bug related to our space reservation
code, let's just focus on the error handling.
For example, we have the following dirty range [0, 64K) of an inode,
with 4K sector size and 4K page size:
0 16K 32K 48K 64K
|///////////////////////////////////////|
|#######################################|
Where |///| means page are still dirty, and |###| means the extent io
tree has EXTENT_DELALLOC flag.
- Enter extent_writepage() for page 0
- Enter btrfs_run_delalloc_range() for range [0, 64K)
- Enter cow_file_range() for range [0, 64K)
- Function btrfs_reserve_extent() only reserved one 16K extent
So we created extent map and ordered extent for range [0, 16K)
0 16K 32K 48K 64K
|////////|//////////////////////////////|
|<- OE ->|##############################|
And range [0, 16K) has its delalloc flag cleared.
But since we haven't yet submit any bio, involved 4 pages are still
dirty.
- Function btrfs_reserve_extent() returns with -ENOSPC
Now we have to run error cleanup, which will clear all
EXTENT_DELALLOC* flags and clear the dirty flags for the remaining
ranges:
0 16K 32K 48K 64K
|////////| |
| | |
Note that range [0, 16K) still has its pages dirty.
- Some time later, writeback is triggered again for the range [0, 16K)
since the page range still has dirty flags.
- btrfs_run_delalloc_range() will do nothing because there is no
EXTENT_DELALLOC flag.
- extent_writepage_io() finds page 0 has no ordered flag
Which falls into the COW fixup path, triggering the BUG_ON().
Unfortunately this error handling bug dates back to the introduction of
btrfs. Thankfully with the abuse of COW fixup, at least it won't crash
the kernel.
[FIX]
Instead of immediately unlocking the extent and folios, we keep the extent
and folios locked until either erroring out or the whole delalloc range
finished.
When the whole delalloc range finished without error, we just unlock the
whole range with PAGE_SET_ORDERED (and PAGE_UNLOCK for !keep_locked
cases)
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: do proper folio cleanup when run_delalloc_nocow() failed
[BUG]
With CONFIG_DEBUG_VM set, test case generic/476 has some chance to crash
with the following VM_BUG_ON_FOLIO():
BTRFS error (device dm-3): cow_file_range failed, start 1146880 end 1253375 len 106496 ret -28
BTRFS error (device dm-3): run_delalloc_nocow failed, start 1146880 end 1253375 len 106496 ret -28
page: refcount:4 mapcount:0 mapping:00000000592787cc index:0x12 pfn:0x10664
aops:btrfs_aops [btrfs] ino:101 dentry name(?):"f1774"
flags: 0x2fffff80004028(uptodate|lru|private|node=0|zone=2|lastcpupid=0xfffff)
page dumped because: VM_BUG_ON_FOLIO(!folio_test_locked(folio))
------------[ cut here ]------------
kernel BUG at mm/page-writeback.c:2992!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
CPU: 2 UID: 0 PID: 3943513 Comm: kworker/u24:15 Tainted: G OE 6.12.0-rc7-custom+ #87
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022
Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs]
pc : folio_clear_dirty_for_io+0x128/0x258
lr : folio_clear_dirty_for_io+0x128/0x258
Call trace:
folio_clear_dirty_for_io+0x128/0x258
btrfs_folio_clamp_clear_dirty+0x80/0xd0 [btrfs]
__process_folios_contig+0x154/0x268 [btrfs]
extent_clear_unlock_delalloc+0x5c/0x80 [btrfs]
run_delalloc_nocow+0x5f8/0x760 [btrfs]
btrfs_run_delalloc_range+0xa8/0x220 [btrfs]
writepage_delalloc+0x230/0x4c8 [btrfs]
extent_writepage+0xb8/0x358 [btrfs]
extent_write_cache_pages+0x21c/0x4e8 [btrfs]
btrfs_writepages+0x94/0x150 [btrfs]
do_writepages+0x74/0x190
filemap_fdatawrite_wbc+0x88/0xc8
start_delalloc_inodes+0x178/0x3a8 [btrfs]
btrfs_start_delalloc_roots+0x174/0x280 [btrfs]
shrink_delalloc+0x114/0x280 [btrfs]
flush_space+0x250/0x2f8 [btrfs]
btrfs_async_reclaim_data_space+0x180/0x228 [btrfs]
process_one_work+0x164/0x408
worker_thread+0x25c/0x388
kthread+0x100/0x118
ret_from_fork+0x10/0x20
Code: 910a8021 a90363f7 a9046bf9 94012379 (d4210000)
---[ end trace 0000000000000000 ]---
[CAUSE]
The first two lines of extra debug messages show the problem is caused
by the error handling of run_delalloc_nocow().
E.g. we have the following dirtied range (4K blocksize 4K page size):
0 16K 32K
|//////////////////////////////////////|
| Pre-allocated |
And the range [0, 16K) has a preallocated extent.
- Enter run_delalloc_nocow() for range [0, 16K)
Which found range [0, 16K) is preallocated, can do the proper NOCOW
write.
- Enter fallback_to_fow() for range [16K, 32K)
Since the range [16K, 32K) is not backed by preallocated extent, we
have to go COW.
- cow_file_range() failed for range [16K, 32K)
So cow_file_range() will do the clean up by clearing folio dirty,
unlock the folios.
Now the folios in range [16K, 32K) is unlocked.
- Enter extent_clear_unlock_delalloc() from run_delalloc_nocow()
Which is called with PAGE_START_WRITEBACK to start page writeback.
But folios can only be marked writeback when it's properly locked,
thus this triggered the VM_BUG_ON_FOLIO().
Furthermore there is another hidden but common bug that
run_delalloc_nocow() is not clearing the folio dirty flags in its error
handling path.
This is the common bug shared between run_delalloc_nocow() and
cow_file_range().
[FIX]
- Clear folio dirty for range [@start, @cur_offset)
Introduce a helper, cleanup_dirty_folios(), which
will find and lock the folio in the range, clear the dirty flag and
start/end the writeback, with the extra handling for the
@locked_folio.
- Introduce a helper to clear folio dirty, start and end writeback
- Introduce a helper to record the last failed COW range end
This is to trace which range we should skip, to avoid double
unlocking.
- Skip the failed COW range for the e
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
s390/pkey: Wipe copies of protected- and secure-keys
Although the clear-key of neither protected- nor secure-keys is
accessible, this key material should only be visible to the calling
process. So wipe all copies of protected- or secure-keys from stack,
even in case of an error. |
| CVE-2026-110924 has been marked as a duplicate of CVE-2026-106553. |
| libexpat 2.7.2 through 2.9.0 contains a denial of service vulnerability because XML_ParserReset zeroes the direct byte count but never offsets tracked heap allocations. Attackers can submit a large XML document so later documents on the same reset parser fail with XML_ERROR_NO_MEMORY until it is recreated. |
| In the Linux kernel, the following vulnerability has been resolved:
udp: remove a disconnected socket from the 4-tuple hash table
A UDP socket bound to a specific address and port keeps its entry in the
4-tuple hash table after it is disconnected:
sk binds to 127.0.0.1:21001
sk connects to 127.0.0.2:20001 // filed in the 4-tuple table
sk disconnects, connect(AF_UNSPEC) // still filed, peer now 0.0.0.0:0
__udp_disconnect() takes a socket out of that table only as a side effect
of ->rehash() or ->unhash(), and it skips ->rehash() when
SOCK_BINDADDR_LOCK is set and ->unhash() when SOCK_BINDPORT_LOCK is set.
commit 6996a2d2d0a6 ("udp: Unhash auto-bound connected sk from 4-tuple hash
table when disconnected.") fixed the same end state for a wildcard-bound
socket, by a path this one does not take.
The entry is counted whether or not anything hits it. hash4_cnt on the
hash2 slot stays raised for as long as the socket lives, so udp_has_hash4()
keeps sending every packet for that address and port through the 4-tuple
lookup first.
On IPv6 it can also be hit. __udp_disconnect() does not clear sk_v6_daddr,
so udp_v6_rehash() files the entry under the peer the socket was connected
to with a zero dport, and inet6_match() compares that same
field: a datagram from the former peer with a zero source port matches,
and source port zero is accepted on receive. On IPv4 the peer is cleared,
so a match would need a zero source address as well, which the routing
layer rejects as martian. The stale sk_v6_daddr is a separate defect, not
addressed here; removing the entry closes this path either way.
The entry can also be relocated. __udp_disconnect() clears sk_bound_dev_if,
so a subsequent SO_BINDTODEVICE calls ->rehash(), and because the receive
address is still specific udp_lib_rehash() moves the entry instead of
removing it, into the bucket that (rcv_saddr, num, 0, 0) hashes to -- a
pure function of the address and port, so every socket reaching this state
on one address and port collects in one bucket. The bucket cannot be chosen
from outside, as udp_ehashfn() is seeded with a per-boot secret. This last
one became reachable only with commit 644f9108f3a5 ("udp: Make rehash4
independent in udp_lib_rehash()"), which moved the hash4 handling out of a
branch a disconnected socket does not take; the stale entry itself dates
from the commit in Fixes.
Take the socket out of the table before __udp_disconnect() runs, while it
still matches how it was filed. This also reaches the wildcard case ahead
of udp_lib_rehash()'s udp_unhash4() branch, leaving that branch unreachable
from udp_disconnect(); removing it belongs in net-next. udp_disconnect()
and udp_abort() are the only UDP entries into __udp_disconnect(), which is
shared with raw, ping and l2tp sockets that are not struct udp_sock:
ping_prot.obj_size is sizeof(struct inet_sock), so udp_hashed4() on one
would read past the allocation. |
| Incomplete cleanup vulnerability in Apache Tomcat could cause TLS 1.3 connections to fail intermittently.
This issue affects Apache Tomcat: from 11.0.0-M21 through 11.0.26, from 10.1.25 through 10.1.60, from 9.0.90 through 9.0.122.
Users are recommended to upgrade to version 11.0.27, 10.1.61 or 9.0.123, which fix the issue. |
| Incomplete cleanup vulnerability in Apache Tomcat allowed an trailer information from a previous request to leak into a subsequent request.
This issue affects Apache Tomcat: from 11.0.0-M23 through 11.0.26, from 10.1.27 through 10.1.60, from 9.0.92 through 9.0.122.
Users are recommended to upgrade to version 11.0.27, 10.1.61 or 9.0.123, which fix the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/server: cancel async requests when closing connection
An async request may still be waiting when a connection is closed.
This can stop the connection from closing.
Cancel active async requests before waiting for them to finish. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: stop hardware after post-start probe failures
wacom_parse_and_register() starts HID hardware before registering inputs
and initializing pad LEDs/remotes. Those later steps can fail, but their
error paths currently release Wacom resources without stopping the HID
hardware.
Route post-hid_hw_start() failures through hid_hw_stop() before
releasing driver resources.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: tlb: Flush walk cache when unsharing PMD tables
When huge_pmd_unshare() is called to unshare a PMD table, the
tlb_unshare_pmd_ptdesc() function sets tlb->unshared_tables=true
but the aarch64 tlb_flush() only checked tlb->freed_tables to
determine whether to use TLBF_NONE (vae1is, invalidates walk
cache) or TLBF_NOWALKCACHE (vale1is, leaf-only).
This caused the stale PMD page table entry to remain in the walk cache
after unshare, potentially leading to incorrect page table walks.
Fix by including unshared_tables in the check, so that when
unsharing tables, TLBF_NONE is used and the walk cache is properly
invalidated.
Here is the detailed distinction between vae1is and vale1is:
| Instruction Combination | Actual Invalidation Scope |
| ------------------------ | --------------------------------------------------|
| `VAE1IS` + TTL=`0` | All entries at all levels (full invalidation) |
| `VAE1IS` + TTL=`2` (L2) | Non-leaf at Level 0/1 + leaf at Level 2 |
| `VALE1IS` + TTL=`0` | Leaf entries at all levels (non-leaf not cleared) |
| `VALE1IS` + TTL=`2` (L2) | Leaf entry at Level 2 only | |
| undici is an HTTP client library for Node.js. In versions 6.23.0 through 6.29.0, 7.18.0 through 7.30.0, and 8.0.0 through 8.12.1, its fetch() implementation crashes the Node.js process when a malicious server returns a response with more than five content codings and closes the connection before sending the body. undici rejects such responses because of a content-encoding limit, but it created the internal response stream before that check and returned without attaching an error listener or aborting the request, so the early close surfaces a content-length mismatch on the orphaned stream, which Node.js treats as an unhandled error and terminates the process. A remote, unauthenticated server can trigger this with a single response, even when the application correctly catches the fetch() rejection, resulting in a denial of service. The issue is fixed in undici 6.29.1, 7.30.1, and 8.12.2, and users should upgrade to one of those versions or later. There is no workaround. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: clean the sfp upstream if phy probing fails
Sashiko reported that we don't call sfp_bus_del_upstream() in the probe
failure path, so let's add it, otherwise the sfp-bus is left with a
dangling 'upstream' field, that may be used later on during SFP events.
This issue existed before the generic phylib sfp support, back when
drivers were calling phy_sfp_probe themselves. |
| In the Linux kernel, the following vulnerability has been resolved:
seg6: separate dst_cache for input and output paths in seg6 lwtunnel
The seg6 lwtunnel uses a single dst_cache per encap route, shared
between seg6_input_core() and seg6_output_core(). These two paths
can perform the post-encap SID lookup in different routing contexts
(e.g., ip rules matching on the ingress interface, or VRF table
separation). Whichever path runs first populates the cache, and the
other reuses it blindly, bypassing its own lookup.
Fix this by splitting the cache into cache_input and cache_output,
so each path maintains its own cached dst independently. |
