| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ip6_gre: make ip6gre_header() robust
Over the years, syzbot found many ways to crash the kernel
in ip6gre_header() [1].
This involves team or bonding drivers ability to dynamically
change their dev->needed_headroom and/or dev->hard_header_len
In this particular crash mld_newpack() allocated an skb
with a too small reserve/headroom, and by the time mld_sendpack()
was called, syzbot managed to attach an ip6gre device.
[1]
skbuff: skb_under_panic: text:ffffffff8a1d69a8 len:136 put:40 head:ffff888059bc7000 data:ffff888059bc6fe8 tail:0x70 end:0x6c0 dev:team0
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:213 !
<TASK>
skb_under_panic net/core/skbuff.c:223 [inline]
skb_push+0xc3/0xe0 net/core/skbuff.c:2641
ip6gre_header+0xc8/0x790 net/ipv6/ip6_gre.c:1371
dev_hard_header include/linux/netdevice.h:3436 [inline]
neigh_connected_output+0x286/0x460 net/core/neighbour.c:1618
neigh_output include/net/neighbour.h:556 [inline]
ip6_finish_output2+0xfb3/0x1480 net/ipv6/ip6_output.c:136
__ip6_finish_output net/ipv6/ip6_output.c:-1 [inline]
ip6_finish_output+0x234/0x7d0 net/ipv6/ip6_output.c:220
NF_HOOK_COND include/linux/netfilter.h:307 [inline]
ip6_output+0x340/0x550 net/ipv6/ip6_output.c:247
NF_HOOK+0x9e/0x380 include/linux/netfilter.h:318
mld_sendpack+0x8d4/0xe60 net/ipv6/mcast.c:1855
mld_send_cr net/ipv6/mcast.c:2154 [inline]
mld_ifc_work+0x83e/0xd60 net/ipv6/mcast.c:2693 |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: xattr: fix null pointer deref in ext4_raw_inode()
If ext4_get_inode_loc() fails (e.g. if it returns -EFSCORRUPTED),
iloc.bh will remain set to NULL. Since ext4_xattr_inode_dec_ref_all()
lacks error checking, this will lead to a null pointer dereference
in ext4_raw_inode(), called right after ext4_get_inode_loc().
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: Revert "scsi: qla2xxx: Perform lockless command completion in abort path"
This reverts commit 0367076b0817d5c75dfb83001ce7ce5c64d803a9.
The commit being reverted added code to __qla2x00_abort_all_cmds() to
call sp->done() without holding a spinlock. But unlike the older code
below it, this new code failed to check sp->cmd_type and just assumed
TYPE_SRB, which results in a jump to an invalid pointer in target-mode
with TYPE_TGT_CMD:
qla2xxx [0000:65:00.0]-d034:8: qla24xx_do_nack_work create sess success
0000000009f7a79b
qla2xxx [0000:65:00.0]-5003:8: ISP System Error - mbx1=1ff5h mbx2=10h
mbx3=0h mbx4=0h mbx5=191h mbx6=0h mbx7=0h.
qla2xxx [0000:65:00.0]-d01e:8: -> fwdump no buffer
qla2xxx [0000:65:00.0]-f03a:8: qla_target(0): System error async event
0x8002 occurred
qla2xxx [0000:65:00.0]-00af:8: Performing ISP error recovery -
ha=0000000058183fda.
BUG: kernel NULL pointer dereference, address: 0000000000000000
PF: supervisor instruction fetch in kernel mode
PF: error_code(0x0010) - not-present page
PGD 0 P4D 0
Oops: 0010 [#1] SMP
CPU: 2 PID: 9446 Comm: qla2xxx_8_dpc Tainted: G O 6.1.133 #1
Hardware name: Supermicro Super Server/X11SPL-F, BIOS 4.2 12/15/2023
RIP: 0010:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
RSP: 0018:ffffc90001f93dc8 EFLAGS: 00010206
RAX: 0000000000000282 RBX: 0000000000000355 RCX: ffff88810d16a000
RDX: ffff88810dbadaa8 RSI: 0000000000080000 RDI: ffff888169dc38c0
RBP: ffff888169dc38c0 R08: 0000000000000001 R09: 0000000000000045
R10: ffffffffa034bdf0 R11: 0000000000000000 R12: ffff88810800bb40
R13: 0000000000001aa8 R14: ffff888100136610 R15: ffff8881070f7400
FS: 0000000000000000(0000) GS:ffff88bf80080000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 000000010c8ff006 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __die+0x4d/0x8b
? page_fault_oops+0x91/0x180
? trace_buffer_unlock_commit_regs+0x38/0x1a0
? exc_page_fault+0x391/0x5e0
? asm_exc_page_fault+0x22/0x30
__qla2x00_abort_all_cmds+0xcb/0x3e0 [qla2xxx_scst]
qla2x00_abort_all_cmds+0x50/0x70 [qla2xxx_scst]
qla2x00_abort_isp_cleanup+0x3b7/0x4b0 [qla2xxx_scst]
qla2x00_abort_isp+0xfd/0x860 [qla2xxx_scst]
qla2x00_do_dpc+0x581/0xa40 [qla2xxx_scst]
kthread+0xa8/0xd0
</TASK>
Then commit 4475afa2646d ("scsi: qla2xxx: Complete command early within
lock") added the spinlock back, because not having the lock caused a
race and a crash. But qla2x00_abort_srb() in the switch below already
checks for qla2x00_chip_is_down() and handles it the same way, so the
code above the switch is now redundant and still buggy in target-mode.
Remove it. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: fix ipv4 null-ptr-deref in route error path
The IPv4 code path in __ip_vs_get_out_rt() calls dst_link_failure()
without ensuring skb->dev is set, leading to a NULL pointer dereference
in fib_compute_spec_dst() when ipv4_link_failure() attempts to send
ICMP destination unreachable messages.
The issue emerged after commit ed0de45a1008 ("ipv4: recompile ip options
in ipv4_link_failure") started calling __ip_options_compile() from
ipv4_link_failure(). This code path eventually calls fib_compute_spec_dst()
which dereferences skb->dev. An attempt was made to fix the NULL skb->dev
dereference in commit 0113d9c9d1cc ("ipv4: fix null-deref in
ipv4_link_failure"), but it only addressed the immediate dev_net(skb->dev)
dereference by using a fallback device. The fix was incomplete because
fib_compute_spec_dst() later in the call chain still accesses skb->dev
directly, which remains NULL when IPVS calls dst_link_failure().
The crash occurs when:
1. IPVS processes a packet in NAT mode with a misconfigured destination
2. Route lookup fails in __ip_vs_get_out_rt() before establishing a route
3. The error path calls dst_link_failure(skb) with skb->dev == NULL
4. ipv4_link_failure() → ipv4_send_dest_unreach() →
__ip_options_compile() → fib_compute_spec_dst()
5. fib_compute_spec_dst() dereferences NULL skb->dev
Apply the same fix used for IPv6 in commit 326bf17ea5d4 ("ipvs: fix
ipv6 route unreach panic"): set skb->dev from skb_dst(skb)->dev before
calling dst_link_failure().
KASAN: null-ptr-deref in range [0x0000000000000328-0x000000000000032f]
CPU: 1 PID: 12732 Comm: syz.1.3469 Not tainted 6.6.114 #2
RIP: 0010:__in_dev_get_rcu include/linux/inetdevice.h:233
RIP: 0010:fib_compute_spec_dst+0x17a/0x9f0 net/ipv4/fib_frontend.c:285
Call Trace:
<TASK>
spec_dst_fill net/ipv4/ip_options.c:232
spec_dst_fill net/ipv4/ip_options.c:229
__ip_options_compile+0x13a1/0x17d0 net/ipv4/ip_options.c:330
ipv4_send_dest_unreach net/ipv4/route.c:1252
ipv4_link_failure+0x702/0xb80 net/ipv4/route.c:1265
dst_link_failure include/net/dst.h:437
__ip_vs_get_out_rt+0x15fd/0x19e0 net/netfilter/ipvs/ip_vs_xmit.c:412
ip_vs_nat_xmit+0x1d8/0xc80 net/netfilter/ipvs/ip_vs_xmit.c:764 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: Reset t_task_cdb pointer in error case
If allocation of cmd->t_task_cdb fails, it remains NULL but is later
dereferenced in the 'err' path.
In case of error, reset NULL t_task_cdb value to point at the default
fixed-size buffer.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| Netcore NR256CN through 1.5.140116 contains a NULL pointer dereference vulnerability in the Boa web server's user_auth() function that allows unauthenticated attackers to crash the server via a malformed Authorization header. Attackers can send a Basic Authorization value lacking a colon, such as one decoding to a single character, to protected routes like /router/get_user_type.cgi to kill the main Boa process and deny management interface access. |
| Null pointer dereference in Windows Routing and Remote Access Service (RRAS) allows an unauthorized attacker to deny service over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: guard dc_sink dereferences in MST mode validation
dm_dp_mst_is_port_support_mode() reads
aconnector->dc_sink->dsc_caps... for the DSC branch-throughput check,
and get_conv_frl_bw()'s HDMI-PCON FRL-bandwidth path reads
aconnector->dc_sink->edid_caps.max_frl_rate, both without a NULL
check. dc_sink is cleared asynchronously on MST unplug, and both
functions run from paths that the driver's own comments document as
racing that teardown: the connector probe worker's ->mode_valid
callback and a compositor's atomic check, neither of which holds the
MST manager lock that the teardown path uses. The former does have an
existing dsc_aux NULL check, but dsc_aux isn't reliably cleared in
every path that clears dc_sink, so it doesn't cover this.
Fail the port-support check and skip the FRL conversion path when the
sink is already gone.
(cherry picked from commit 7c3db8da4e039698ae198c870712428644e965c7) |
| In the Linux kernel, the following vulnerability has been resolved:
pfcp: fix socket lifetime on netdevice registration failure
pfcp_newlink() creates the UDP socket before register_netdevice().
If registration fails after pfcp_dev_init() succeeds, the core calls
pfcp_dev_uninit(), which releases the socket and clears pfcp->sk.
The newlink error path then releases it again, causing a NULL pointer
dereference. This was observed with failslab fault injection:
FAULT_INJECTION: forcing a failure.
kobject: kobject_add_internal failed for pfcp0 (error: -12 parent: net)
BUG: KASAN: null-ptr-deref in udp_tunnel_sock_release+0x1c/0x50
Read of size 8 at addr 0000000000000120 by task ip/1037
Call trace:
show_stack+0x18/0x24 (C)
dump_stack_lvl+0x78/0x90
print_report+0x468/0x5cc
kasan_report+0xa4/0xf0
__asan_load8+0x7c/0xd0
udp_tunnel_sock_release+0x1c/0x50
pfcp_newlink+0x128/0x184
rtnl_newlink+0x848/0xe44
rtnetlink_rcv_msg+0x468/0x514
netlink_rcv_skb+0xc0/0x1f0
rtnetlink_rcv+0x18/0x24
netlink_unicast+0x4b8/0x558
netlink_sendmsg+0x2b8/0x584
...
Return from pfcp_del_sock() if pfcp->sk is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
virt: vmgenid: set driver_data before registering notification handlers
Both probe paths register their notification handler before assigning
driver_data, which the handler dereferences.
In the devicetree path, the notification IRQ can fire as soon as
devm_request_irq() registers the handler: the interrupt may already be
pending at probe time, for example when a VMM injects the
generation-changed notification while restoring a guest from a snapshot
that was taken before the driver had probed (Firecracker does exactly
this on snapshot restore). The IRQ is also requested with IRQF_SHARED,
so another device sharing the line can trigger the handler just as
early. The handler then calls vmgenid_notify(), which dereferences the
still-NULL driver_data and panics:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.38+ #1 PREEMPT(none)
Hardware name: linux,dummy-virt (DT)
pc : vmgenid_notify.isra.0+0x24/0x8c
lr : vmgenid_of_irq_handler+0x14/0x34
Call trace:
vmgenid_notify.isra.0+0x24/0x8c (P)
vmgenid_of_irq_handler+0x14/0x34
__handle_irq_event_percpu+0x44/0x1bc
handle_irq_event+0x4c/0xb4
handle_fasteoi_irq+0xf8/0x1f8
The ACPI path has the same ordering problem: the handler is installed
with acpi_install_notify_handler() before driver_data is assigned.
ACPI notifications are dispatched asynchronously from a workqueue, so
the window is narrow, but a notification arriving between the two calls
hits the same NULL dereference.
Assign driver_data before registering the handlers. The state is fully
initialized at that point, so the handlers are safe to run. Should
registration fail, the probe error path leaves no dangling pointer
behind: the driver core clears driver_data in device_unbind_cleanup(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: sparx5: skip ptp deinit if init was skipped
sparx5_ptp_init() returns early on the base lan969x variants
because they do not have the SPX5_FEATURE_PTP flag. It also returns early
when no "ptp" interrupt is described. Unbinding the driver then causes a
NULL pointer dereference when cleaning up uninitialized tx_skbs queues:
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000008
Call trace:
skb_queue_purge_reason+0x68/0x120 (P)
sparx5_ptp_deinit+0x64/0xc0
mchp_sparx5_remove+0x38/0x70
platform_remove+0x20/0x30
device_remove+0x4c/0x80
Before per-port tx_skbs were added, a NULL dereference would have happened
when calling ptp_clock_unregister() on the never-registered PTP clocks.
Fix by returning early in sparx5_ptp_deinit() if PTP is not used. |
| Dimension is affected by a NULL Pointer Dereference vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Substance3D - Stager is affected by a NULL Pointer Dereference vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix rx Scatter-Gather support
When a received frame is larger than dma_buf_sz, the DMA scatters it
across multiple RX descriptors (rx Scatter-Gather). The secondary RX
buffer (sec_page) was only allocated and programmed when split-header
(SPH) was active, so for regular frames buffer2 was neither allocated
nor backed by a valid mapping. As soon as an incoming frame overflowed
buffer1, the DMA wrote the overflow into the unmapped secondary-buffer
address, triggering an SMMU translation fault on IOMMU-based platforms:
arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x00000000, fsynr=0x7f0011, cbfrsynra=0x1c90, cb=11
arm-smmu 15000000.iommu: FSR = 00000402 [Format=2 TF], SID=0x1c90
arm-smmu 15000000.iommu: FSYNR0 = 007f0011 [S1CBNDX=127 WNR PLVL=1]
Enable scatter-gather for non-SPH frames on cores that can program an
independent secondary RX buffer (GMAC4/XGMAC): allocate and mark buffer2
as valid in stmmac_init_rx_buffers() and stmmac_rx_refill(), and account
for it in the buffer length computation. Legacy cores have no set_sec_addr
op, so they keep buffer2 disabled.
Since buffer2 is handed to the DMA at page offset 0, the page pool sync
window is widened to cover both buffers in every mode: offset is set to 0
and max_len to dma_buf_sz + stmmac_rx_offset().
The FCS can straddle the buffer1/buffer2 boundary and a descriptor
boundary, so it is now stripped from the tail of the assembled frame with
pskb_trim() instead of from a single buffer, avoiding an unsigned underflow
for frames that overflow a buffer by 1..3 bytes. For single-buffer frames
the XDP program must not see the FCS, so it is removed from the XDP buffer
before the program runs.
Native XDP currently only supports single-buffer (linear) frames. An
oversized frame accepted by the MAC (jumbo enabled) is received via
buffer2; the XDP program only sees buffer1, so on a TX/REDIRECT verdict
the frame is forwarded truncated. XDP multi-buffer support to handle
this case is planned as a follow-up.
AF_XDP zero-copy RX is not covered by this change: a ZC queue still
programs buffer2 at DMA address 0 (and XGMAC has no buffer2-valid bit),
so an oversized frame overflowing buffer1 can still trigger the same
SMMU translation fault. Handling is planned as a follow-up. |
| In the Linux kernel, the following vulnerability has been resolved:
block: reject polled dio with user integrity metadata
IOCB_HAS_METADATA leaves iocb->private as a uio_meta, while
iocb_bio_iopoll() expects a bio. Since 2729a60bbfb9, metadata I/O
always uses __blkdev_direct_IO(), which never publishes the bio for
polling, so IOPOLL calls bio_poll() on the uio_meta.
Reproducer: io_uring IOPOLL plus a PI attribute on an integrity device
(scsi_debug dif=1 dix=1). KASAN reports:
Oops: general protection fault, probably for non-canonical
address 0xdffffc0000000004
KASAN: null-ptr-deref in range
[0x0000000000000020-0x0000000000000027]
RIP: 0010:bio_poll+0x9d/0x4b0
Call Trace:
iocb_bio_iopoll+0x5b/0x80
io_uring_classic_poll+0xf3/0x140
io_do_iopoll+0x4e3/0xc00
io_iopoll_check+0x275/0x560
__do_sys_io_uring_enter+0x2e5/0x720
Return -EOPNOTSUPP when HIPRI is combined with user metadata. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix AF_XDP TX timestamp teardown NULL dereference
During XSK TX queue teardown, outstanding descriptors are completed
without a CQE. If one requested a TX timestamp, the completion path
passes that NULL CQE to mlx5e_xsk_fill_timestamp(), which dereferences
it.
Return zero when no CQE is available, indicating that teardown did not
produce a TX timestamp. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: Fix aura BPID assignment when CONFIG_DCB is enabled
Previously, BPID assignment under CONFIG_DCB assumed
`queue_to_pfc_map` was always initialized. For SDP VFs this leads to
invalid memory access as it was not initialized.
This patch adds a NULL check for `queue_to_pfc_map` before
dereferencing it. Also, simplifies the logic by always assigning a
default BPID first, then conditionally overriding it if CONFIG_DCB is
enabled and the map exists. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: core: fix NULL pointer dereference in serial_core_unregister_port()
port->port_dev is NULL when no port device is installed: it is cleared
on teardown, and never set if registration failed before
serial_core_port_device_add(). serial_core_unregister_port() passes it
straight to serial_core_get_ctrl_dev(), which dereferences it:
KASAN: null-ptr-deref in range [0x0000000000000040-0x0000000000000047]
RIP: serial_core_unregister_port
Call Trace:
serial8250_unregister_port
serial8250_remove
unbind_store
Return early when there is no port device, and read port->port_dev
under port_mutex.
Also clear port->port_dev on the serial_core_register_port() error
path, where the port device has already been removed. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ade9000: fix NULL pointer dereference in clkout registration
ade9000_setup_clkout() passes NULL as the register address when
registering a divider clock. During clock registration, the common
clock framework calls clk_divider_recalc_rate(), which dereferences
the address through readl(). As a result, probing an ADE9000 configured
as a clock provider with an external input clock crashes.
CLKOUT passes CLKIN through without changing its rate. Register it as
a 1:1 fixed-factor clock, which does not require register access.
This change does not affect the configuration using the internal clock,
for which the driver does not register a clock provider. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Properly handle NULL pointer in dat_cond_set_storage_key()
Some callers pass NULL as oldkey. Calling page_cond_set_storage_key()
will cause that NULL pointer to get dereferenced.
Fix by checking for NULL and assigning the pointer to a dummy local
variable to avoid crashes. |
