| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: Use devm_kmemdup() in rtw_set_supported_band()
Simplify the code by using device managed memory allocations.
This also fixes a memory leak in rtw_register_hw(). The supported bands
were not freed in the error path.
Copied from commit 145df52a8671 ("wifi: rtw89: Convert
rtw89_core_set_supported_band to use devm_*"). |
| In the Linux kernel, the following vulnerability has been resolved:
most: core: fix resource leak in most_register_interface error paths
The function most_register_interface() did not correctly release resources
if it failed early (before registering the device). In these cases, it
returned an error code immediately, leaking the memory allocated for the
interface.
Fix this by initializing the device early via device_initialize() and
calling put_device() on all error paths.
The most_register_interface() is expected to call put_device() on
error which frees the resources allocated in the caller. The
put_device() either calls release_mdev() or dim2_release(),
depending on the caller.
Switch to using device_add() instead of device_register() to handle
the split initialization. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Fix memory leak due to multiple rx_stats allocation
rx_stats for each arsta is allocated when adding a station.
arsta->rx_stats will be freed when a station is removed.
Redundant allocations are occurring when the same station is added
multiple times. This causes ath12k_mac_station_add() to be called
multiple times, and rx_stats is allocated each time. As a result there
is memory leaks.
Prevent multiple allocations of rx_stats when ath12k_mac_station_add()
is called repeatedly by checking if rx_stats is already allocated
before allocating again. Allocate arsta->rx_stats if arsta->rx_stats
is NULL respectively.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 |
| CVE-2026-110927 has been marked as a duplicate of CVE-2026-106585. |
| libp2p-rust is the official Rust language implementation of the libp2p networking stack. Prior to 0.49.5, Gossipsub GRAFT control-message handling unconditionally adds attacker-supplied topic hashes to connected_peer.topics without confirming that the peer previously subscribed to those topics. A remote unauthenticated peer that can reach a Gossipsub listener can repeatedly send novel GRAFT topics, causing cumulative per-peer memory growth that is not bounded by subscription filters, peer scoring, or per-message size limits. This can exhaust process memory and cause a denial of service. This issue is fixed in version 0.49.5. |
| A denial of service vulnerability exists when Microsoft Common Object Runtime Library improperly handles web requests. An attacker who successfully exploited this vulnerability could cause a denial of service against a .NET web application.
A remote unauthenticated attacker could exploit this vulnerability by issuing specially crafted requests to the .NET application.
The update addresses the vulnerability by correcting how the .NET web application handles web requests. |
| A command injection vulnerability could allow an authenticated attacker to achieve root-level code execution on the system. |
| A vulnerability could allow an attacker to forge a packet to execute arbitrary commands with maximum privileges. |
| One logical thread of a user-mode ThreadX module costs the Module Manager's shared object pool two allocations, not one. The module asks for a `TX_THREAD` control block through `txm_module_object_allocate`; `_txm_module_manager_thread_create` then takes a second allocation of `TXM_MODULE_KERNEL_STACK_SIZE` bytes for the privileged kernel stack that thread's system calls run on, and records it in the control block. Both come from `_txm_module_manager_object_pool` and both are linked onto the module's allocation list.
The Module Manager's thread-delete dispatcher released only the first. The kernel stack stayed allocated until the whole module was stopped, so a module that creates, terminates and deletes threads in a loop — every state transition valid, every service returning `TX_SUCCESS` — removed a fixed block from a finite pool shared by the manager and by every other loaded module, on every cycle, for as long as it stayed loaded. Once the pool is exhausted, no memory-protected module can create any kernel object and no user-mode module thread can be created anywhere in the system.
Vulnerable function: `_txm_module_manager_tx_thread_delete_dispatch`, in `common_modules/module_manager/inc/txm_module_manager_dispatch.h`. |
| In the Linux kernel, the following vulnerability has been resolved:
autofs: fix sbi->pipe file reference leak in autofs_kill_sb()
When autofs_fill_super() fails before clearing AUTOFS_SBI_CATATONIC (for
example, when find_get_pid() fails on an invalid pgrp mount option, or
when an fs_context is closed before mounting), deactivate_locked_super()
invokes autofs_kill_sb() -> autofs_catatonic_mode(sbi).
Because AUTOFS_SBI_CATATONIC is still set in sbi->flags,
autofs_catatonic_mode() returns early without calling fput(sbi->pipe),
permanently leaking the pipe struct file reference.
Explicitly release sbi->pipe in autofs_kill_sb() if it is still non-NULL
after autofs_catatonic_mode(). |
| In the Linux kernel, the following vulnerability has been resolved:
tg3: clean up PHYLIB resources on probe failure
tg3_get_invariants() can register an MDIO bus and connect a PHY for
USE_PHYLIB devices. If tg3_init_one() later fails, its common error path
releases the mappings and netdev without undoing those PHYLIB resources.
Disconnect the PHY and unregister the MDIO bus before the remaining
teardown. Guard PHY cleanup with USE_PHYLIB to match tg3_phy_init(), and
call tg3_mdio_fini() unconditionally to match tg3_mdio_init(). The existing
IS_CONNECTED and MDIOBUS_INITED flags make both helpers safe when
initialization only completed partially.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: Fix dst leak for uncached routes.
ip6_route_output_flags(), ip6_rt_put_flags(), and ip6_dst_check()
detect an uncached route by list_empty(&rt->dst.rt_uncached),
which replaced the static DST_NOCACHE flag check in commit
a4c2fd7f7891 ("net: remove DST_NOCACHE flag").
When a device is unregistered, rt6_uncached_list_flush_dev()
unlinks uncached routes tied to the device from rt6_uncached_list.
Previously, they were moved to another list with list_move()
(__list_del_entry() + list_add()), and since commit 98aa546af5e4
("inet: remove (struct uncached_list)->quarantine"), the routes
are just unlinked with list_del_init().
If list_del_init() runs concurrently, list_empty() evaluates to
true; ip6_route_output_flags() calls dst_hold_safe() incorrectly
and ip6_rt_put_flags() skips ip6_rt_put(), leaking dst, and thus
dev tied via rt->from as well.
The same race is partially fixed by commit 9a6f0c4d5796 ("dst:
fix races in rt6_uncached_list_del() and rt_del_uncached_list()").
Let's check rt6->dst.rt_uncached_list instead.
Note that IPv4 does not have the same issue. |
| ApostropheCMS is an open-source Node.js content management system. Prior to 4.33.0 of ApostropheCMS and 3.7.0 of the import-export module, import routes invoke bigUploadMiddleware without an early authorize callback, allowing unauthenticated requests to perform upload initialization, chunk storage, temporary processing, and attacker-declared cleanup work before the later user check rejects the import. This issue is fixed in ApostropheCMS 4.33.0 and import-export 3.7.0. |
| In the Linux kernel, the following vulnerability has been resolved:
fou: reject omitted FOU_ATTR_IPPROTO on FOU_ENCAP_DIRECT
Commit 7a9bc9e3f423 ("fou: Don't allow 0 for FOU_ATTR_IPPROTO.") added
NLA_POLICY_MIN(NLA_U8, 1) to fou_nl_policy[FOU_ATTR_IPPROTO], which
rejects an explicitly supplied FOU_ATTR_IPPROTO == 0 attribute with
-ERANGE.
However, FOU_ATTR_IPPROTO is an optional netlink attribute. When a user
sends FOU_CMD_ADD with FOU_ATTR_TYPE set to FOU_ENCAP_DIRECT and omits
FOU_ATTR_IPPROTO entirely, nla_policy validation succeeds and
parse_nl_config() leaves cfg->protocol as 0 (from memset(cfg, 0,
sizeof(*cfg))). fou_create() then creates a FOU_ENCAP_DIRECT socket with
fou->protocol == 0.
In fou_udp_recv(), returning -fou->protocol to udp_queue_rcv_one_skb()
triggers IP protocol resubmission when fou->protocol > 0, whereas
returning 0 tells the UDP tunnel layer that the skb was consumed without
freeing it. When fou->protocol == 0, every packet received on the socket
returns 0 from fou_udp_recv() and leaks the sk_buff.
Reject FOU_ENCAP_DIRECT when !cfg->protocol in fou_create() so that
creating a direct encapsulation port without FOU_ATTR_IPPROTO fails with
-EINVAL while leaving FOU_CMD_DEL and FOU_CMD_GET (which share
parse_nl_config()) unaffected.
Tested in QEMU against Linux 7.3.0-rc3 by sending a FOU_CMD_ADD Generic
Netlink request with FOU_ATTR_PORT = 5555 and FOU_ATTR_TYPE =
FOU_ENCAP_DIRECT while omitting FOU_ATTR_IPPROTO. On the unfixed kernel,
FOU_CMD_ADD succeeds (err = 0), FOU_CMD_GET reports fou->type = 1 and
fou->protocol = 0, and sending 4000 UDP packets to 127.0.0.1:5555 leaks
all 4000 sk_buffs (SUnreclaim in /proc/meminfo grows from 41456 kB to
59008 kB, +17552 kB); with this patch applied, FOU_CMD_ADD is rejected
with -EINVAL (-22). |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: fix sdreq TLV list leak on parse/alloc/send failure
nfc_genl_llc_sdreq() builds a list of TLV nodes while walking nested
netlink attrs, but 3 error paths (nested-attr parse failure, TLV alloc
ENOMEM, nfc_llcp_send_snl_sdreq() failure) all skip freeing what was
already queued.
Route them through a new free_list label, mirroring the SDRES path in
the same file which already does this. Harmless on the success path
too -- send_snl_sdreq() drains the list as it moves nodes, so it's
already empty by the time free_list runs. |
| A vulnerability was detected in DrayTek Vigor2960 1.5.1.6 Revision 8218. Affected by this vulnerability is the function set_table of the file /cgi-bin/mainfunction.cgi of the component CGI Process. The manipulation of the argument sectiontype results in command injection. The attack may be launched remotely. The exploit is now public and may be used. The vendor explains: "2960 1.5.1.7 has corrected many security issues. And 2960 is EoS with limited support, only major issues would be reviewed(e.g. unauthenticated vuln.)". This vulnerability only affects products that are no longer supported by the maintainer. |
| A vulnerability has been found in DrayTek Vigor2960 1.5.1.6 Revision 8218. This affects the function uploadlangs of the file /cgi-bin/mainfunction.cgi of the component Upload Endpoint. Such manipulation leads to command injection. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.7 is able to mitigate this issue. It is recommended to upgrade the affected component. The vendor explains: "2960 1.5.1.7 has corrected many security issues. And 2960 is EoS with limited support, only major issues would be reviewed(e.g. unauthenticated vuln.)". This vulnerability only affects products that are no longer supported by the maintainer. |
| OpenPrinting CUPS is an open source printing system for Linux and other Unix-like operating systems. Prior to 2.4.20, the backend/ipp.c quote_string() function preserves carriage-return and line-feed characters in a remote printer-controlled marker-message before report_attr() writes the value to the scheduler status stream. The scheduler can parse an injected newline as a separate PPD: control line and persist an attacker-selected PPD keyword. The reporter demonstrated that a later print job on a Foomatic-backed queue could consume an injected FoomaticRIPCommandLine value and execute in the filter context as lp. This issue is fixed in version 2.4.20. |
| In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Vert.x Redis client RESP parser pre-allocates arrays to a length declared by the server without enforcing an upper bound. A malicious or compromised Redis server, or an attacker in a man-in-the-middle position, can send a crafted RESP response declaring an extremely large array, push, or attribute length, causing the client to attempt a massive heap allocation. The resulting OutOfMemoryError crashes the Vert.x event loop thread, denying service to all connections and verticles sharing that loop.
The impacted component is io.vertx:vertx-mysql-client. |
| In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the WebSocket implementation does not define a maximum number of bytes allocation when decompressing frames or messages. This can be used to implement DDOS attacks with a zip bomb.
The impacted component is io.vertx:vertx-core. |
