| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: Fix OOB write in wacom_hid_set_device_mode()
wacom_hid_set_device_mode() currently assumes that the HID_DG_INPUTMODE
usage is always located in the first field (field[0]) of the feature report.
However, a device can specify HID_DG_INPUTMODE in a different field.
If HID_DG_INPUTMODE is in a field other than the first one and the first
field has a report_count smaller than the usage_index of HID_DG_INPUTMODE,
this leads to an out-of-bounds write to r->field[0]->value.
Fix this by storing the field index of HID_DG_INPUTMODE in 'struct
hid_data' during feature mapping. In wacom_hid_set_device_mode(), use
this stored field index to access the correct field and add bounds
checks to ensure both the field index and the value index are within
valid ranges before writing. |
| On Linux, an authenticated, low-privileged Nessus user with scan-creation rights could read arbitrary text files on the scanner host with the privileges of the nessusd process by running a custom Unix compliance audit against the scanner itself. |
| A user with SpaceDeveloper privileges could modify the URL of a space-scoped broker without altering its credentials, enabling extraction of existing broker credentials by redirecting them to a broker under their control. The CF API does not permit direct reading of broker credentials, making this an indirect extraction method. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6: vti: Use ip6_tnl.net in vti6_changelink().
ip netns add ns1
ip netns add ns2
ip -n ns1 link add vti6_test type vti6 remote ::1 local ::2 key 7
ip -n ns1 link set vti6_test netns ns2
ip -n ns2 link set vti6_test type vti6 remote ::3 local ::4 key 9
ip netns del ns2
ip netns del ns1
[ 132.495484] ------------[ cut here ]------------
[ 132.497609] kernel BUG at net/core/dev.c:12376!
Commit 61220ab34948 ("vti6: Enable namespace changing") dropped
NETIF_F_NETNS_LOCAL from vti6 devices. A vti6 tunnel can then
move through IFLA_NET_NS_FD. After the move dev_net(dev) points
at the new netns while t->net stays at the creation netns.
vti6_changelink() and vti6_update() still use dev_net(dev) and
dev_net(t->dev). They unlink from one per netns hash and relink
into another. The creation netns is left with a stale entry.
cleanup_net() of that netns later walks freed memory.
Reachable from an unprivileged user namespace (unshare --user
--map-root-user --net). Cross tenant scope on container hosts. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tcpm: validate VDO count in Discover Identity ACK handlers
Properly validate the count passed from a device when calling
svdm_consume_identity() or svdm_consume_identity_sop_prime() as the
device-controlled value could index off of the static arrays, which
could leak data. |
| Missing queue-set type validation in the queue-set selection system call in FreeRTOS-Kernel before V11.3.3 on MPU-enabled ports with queue sets enabled allows a local unprivileged task to write actor-controlled data beyond a pointer-sized object on the privileged kernel stack, affecting privileged memory across the MPU isolation boundary.
To remediate this issue, users should upgrade to FreeRTOS-Kernel V11.3.3, rebuild, and reflash affected firmware. Builds that do not enable queue sets are not affected. |
| A flaw was found in FreeIPA. The self-managed OTP token ACI does not require authentication and does not restrict which attributes may be added alongside the token entry. An unauthenticated LDAP client can exploit this, combined with a related flaw in the underlying directory server's ACI evaluation (tracked separately), to create an arbitrary attacker-controlled Kerberos principal and have it added to the administrators group. This allows a remote, unauthenticated attacker to obtain genuine FreeIPA administrator-group membership and perform administrative operations against the directory and, on SID-enabled deployments, other IdM services. |
| A flaw was found in FreeIPA. The trust-fetch-domains command is gated by a read-only permission on the trust object rather than a trust-administration permission, allowing an authenticated, non-privileged IPA user to trigger a privileged Active Directory trust refresh using an attacker-supplied server and credentials, resulting in unauthorized, attacker-controlled modification of trusted-domain and ID-range identity data in the IPA LDAP directory. |
| A flaw was found in FreeIPA. A remote, unauthenticated attacker can exploit this vulnerability by sending oversized form POST requests to the `/ipa/migration/migration.py` endpoint. This can force the migration handler to read attacker-controlled request bodies fully into memory, leading to increased memory usage, slower request handling, and potential service disruption or denial of service. |
| A flaw was found in FreeIPA. An unauthenticated remote attacker could exploit a DOM Cross-Site Scripting (XSS) vulnerability in the FreeIPA/IdM Web UI password reset page. By enticing a victim to click a specially crafted link and complete a password reset, the attacker could inject and execute arbitrary JavaScript code. This allows the attacker to perform actions within the victim's authenticated session, potentially leading to full administrative control if an IdM administrator is targeted. |
| A privilege escalation flaw was found in FreeIPA. The uniqueness constraint enforced on Kerberos principal name attributes in the 389-ds directory server does not properly account for equivalent representations of the same principal name, allowing a user with sufficient LDAP write privileges to create a service principal that impersonates an existing privileged one. This can lead to unauthorized acquisition of Kerberos service tickets for sensitive services, potentially resulting in full domain compromise. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tcpm: bound altmode_desc[] per iteration in svdm_consume_modes()
svdm_consume_modes() checks pmdata->altmodes against the array size once
before the loop over the count, but forgot to check the bound at every
point in the loop.
In the well-behaved SVDM discovery flow this is harmless because each of
at most SVID_DISCOVERY_MAX SVIDs contributes at most MODE_DISCOVERY_MAX
modes, exactly filling altmode_desc[ALTMODE_DISCOVERY_MAX]. But the
CMDT_RSP_ACK handler in tcpm_pd_svdm() does not correlate an incoming
ACK with any request the port actually sent. Once port->partner is set,
an unsolicited Discover Modes ACK is consumed unconditionally. A broken
or malicious port partner can therefore drive altmodes to
ALTMODE_DISCOVERY_MAX - 1 via the normal flow, and then send one extra
Discover Modes ACK with seven VDOs. Because the pre-loop check passes,
the loop could then writes up to five entries past altmode_desc[]. For
mode_data_prime the next field in struct tcpm_port is the
partner_altmode[] pointer array, which then receives partner-chosen
SVID/VDO bytes.
Move the bound check inside the loop so the array can never be indexed
past ALTMODE_DISCOVERY_MAX regardless of how many VDOs the partner
supplies or how the function was reached. |
| The Animation Addons for Elementor – GSAP Powered Elementor Addons & Website Templates plugin for WordPress is vulnerable to DOM-Based Stored Cross-Site Scripting via the multiple parameters in all versions up to, and including, 4.2.6 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| Memory corruption in Autofill in Google Chrome prior to 156.0.8078.79 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Wekan is open source kanban built with Meteor. Prior to 11.11, the user-search publication in server/publications/users.js and the searchUsers method in server/models/users.js pass authenticated user-controlled searchTerm and query values to new RegExp() without escaping regular-expression metacharacters. MongoDB-backed deployments evaluate the resulting patterns with PCRE2, allowing a logged-in user to submit catastrophic-backtracking expressions that consume database CPU and degrade or deny service to other users; searchUsers additionally requires board membership or site-admin status. The FerretDB v1 / RE2 unaffected configuration is not practically affected by catastrophic backtracking. This issue is fixed in version 11.11. |
| Kirki plugin for WordPress before 6.2.5 contains a reCAPTCHA bypass vulnerability that allows unauthenticated attackers to submit frontend forms without valid verification by omitting the g-recaptcha-token field from POST requests to the form submission endpoint. Attackers can exploit the verify() method's early return on empty token values to submit unlimited forms, triggering notification emails, webhooks, and unbounded writes to the submissions table without completing reCAPTCHA validation. |
| DataCap through 2025.1.1 contains a missing authorization vulnerability that allows any authenticated user to escalate privileges by calling administrative role and menu management APIs. Attackers, including self-registered accounts, can send PUT requests to /api/v1/user/allocationRole to assign themselves the administrator role and gain full control of the instance. |
| gopacket provides packet processing capabilities for Go. Prior to 1.7.2, the SCTP chunk chain in layers/sctp.go passes attacker-controlled declared lengths and counts to decodeSCTPInit, decodeSCTPShutdown, decodeSCTPError, decodeSCTPSack, and decodeSCTPParameter without checking that each chunk contains the fixed fields, parameter TLVs, gap acknowledgements, or duplicate TSNs those sub-decoders read. A crafted SCTP segment can therefore cause out-of-bounds or inverted slice panics; the panic can terminate applications that use gopacket.DecodeOptions.SkipDecodeRecovery, direct registered decoders, or DecodingLayerParser with IgnorePanic enabled, while the default recovery-enabled APIs convert it to a per-packet decode error. This is the SCTP sub-decoder residual named but not remediated by CVE-2026-65819, whose version 1.7.1 changes bounded the generic dispatcher but left these per-type reads and loops unchecked. The impact is availability only, with no data disclosure, modification, or allocation amplification. This issue is fixed in version 1.7.2. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: ccg: reject firmware images without a ':' record header
do_flash() locates the first .cyacd record with
p = strnchr(fw->data, fw->size, ':');
while (p < eof) {
s = strnchr(p + 1, eof - p - 1, ':');
...
}
If the firmware image contains no ':' byte, strnchr() returns NULL.
NULL compares less than the valid kernel pointer eof, so the loop body
runs and strnchr() is called with p + 1 == (void *)1 and a length of
roughly (unsigned long)eof, causing a wonderful crash.
The not_signed_fw fallthrough earlier in do_flash() and the chip-state
branches in ccg_fw_update_needed() allow an unsigned blob to reach this
loop, so a root user who can place a crafted file under /lib/firmware
and write the do_flash sysfs attribute can trigger the oops.
Bail out with -EINVAL when the initial strnchr() returns NULL. |
| Flowise through 3.1.4 contains a sandbox escape vulnerability that allows authenticated users to execute OS commands by abusing allowlisted langchain and mammoth modules when ALLOW_BUILTIN_DEP=true. Attackers can submit JavaScript to /api/v1/node-custom-function that writes a file into the mammoth package via LocalFileStore and requires it, escaping vm2 as the Flowise process user. |
