| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An access-control vulnerability has been identified in the web server configuration. Some resources intended for on-device use only could be accessed remotely by an unauthenticated attacker with network access to the web interface.
The accessible resources do not expose credentials or provide administrative functionality, but may include non-public device content, such as screen-saver content or assets used by the web interface. |
| A denial-of-service vulnerability has been identified in the Miracast over Infrastructure Connection Establishment (MICE) service. An unauthenticated attacker with network access to the MICE service could consume available connection capacity, preventing legitimate users from establishing MICE-based Miracast connections while the condition persists.
Miracast P2P is not affected. MICE is disabled in the default configuration and must be explicitly enabled by the customer. On most devices, Miracast P2P is available independently of MICE, but a complete disruption of Miracast can occur on some devices when WLAN is configured for Infrastructure mode. |
| When the vSolution Matrix feature is enabled, affected devices may make current screen content available through an unauthenticated RTSP/RTP stream to hosts on the same network segment. The stream is not encrypted, which may allow an unauthenticated host to view or capture presentation content where network access is not otherwise restricted. This vulnerability only affects devices with the vSolution Matrix feature enabled. |
| The pure-Erlang RSAES-PKCS1-v1_5 decryption in the jose_jwa_pkcs1 module is a Bleichenbacher padding oracle. eme_pkcs1_decode/2 returns the recovered message when a decrypted block has valid PKCS#1 v1.5 padding (a leading 0x00 0x02, a padding string of at least eight non-zero bytes, and a 0x00 separator) and returns a distinct error result otherwise, and rsaes_pkcs1_decrypt/2 additionally returns {error, {badsize, _}} when the length check fails. The implementation applies no implicit-rejection countermeasure (RFC 8017 ยง7.2.2): it does not substitute a deterministic pseudo-random plaintext on a padding failure, so a one-bit padding-conformance signal leaks to the caller. Because the underlying modular exponentiation in dp/2 is a raw, non-blinded crypto:mod_pow/3, the padding check also stays distinguishable by timing even when an application normalizes every failure to a single error value.
An unauthenticated attacker who knows only the public RSA key and can submit ciphertexts to a decryption endpoint that unwraps RSA1_5 JWE keys (or otherwise calls decrypt_private/3 with rsa_pkcs1_padding) can use this oracle to recover the plaintext of intercepted ciphertexts, such as content-encryption keys and thus the protected message, or to forge signatures, through roughly 10^4 to 10^6 adaptive chosen-ciphertext queries.
This issue affects jose: from 1.3.0 before 1.11.13. |
| The pure-Erlang AES-GCM fallback in jose_jwa_aes derives the number of verified authentication tag bits from the attacker-supplied tag itself. In the {aes_gcm, Bits} clause of block_decrypt/4, the incoming tag is guarded only by is_binary/1, with no check on its length. Verification in gcm_block_decrypt/6 then computes TBits = bit_size(T) and compares only those bits of the real 128-bit tag. An attacker who controls a JWE token can truncate the authentication tag to as little as 8 bits, so only 8 bits are ever checked. This reduces forgery resistance from 2^-128 to 2^-8, and a forged ciphertext is reliably accepted as authentic within 256 attempts without knowledge of the key (an authentication tag forgery and integrity bypass). Supplying a tag longer than 128 bits instead causes a badmatch that crashes the decrypting process. The fallback is reached through the public JWE decryption path whenever AES-GCM is not provided by a native crypto NIF, for example on FIPS or stripped or older OTP builds.
This issue affects jose: from 1.2.0 before 1.11.13. |
| Furl versions through 3.15 for Perl allow memory exhaustion via unbounded decompression of HTTP responses.
Furl inflates a response body sent with a gzip, x-gzip or deflate Content-Encoding and appends the output to the response string with no size limit. It does this whether or not the request asked for compression, and no option caps the decompressed size. Responses read with write_file or write_code are streamed rather than held in memory.
A malicious server, or an attacker on a plain HTTP connection, can send a small compressed response that expands to exhaust the client's memory and end the process. |
| A use-after-free issue was addressed with improved memory management. This issue is fixed in Safari 27.2, iOS 26.7.2 and iPadOS 26.7.2, iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, tvOS 27.2, visionOS 27.2, watchOS 27.2. Processing maliciously crafted web content may lead to arbitrary code execution. |
| Thor Vector Graphics (ThorVG) is a production-ready vector graphics engine. Prior to 1.0.7, the `SFNT/TTF` font loader's `SfntLoader::gen` function in `tvgSfntLoader.cpp` reads `data[0] through data[3]` to identify the font type without first checking that the input buffer contains at least four bytes. Loading an undersized font directly from memory through public APIs such as `tvg::Text::load` causes an out-of-bounds read. Loading through a file path using `mmap` can mask the read because of page alignment; the memory-loading API directly exposes it. Depending on memory layout, a malformed short font may crash the consuming application or disclose adjacent heap memory. This issue is fixed in version 1.0.7. |
| GRR is a resource management and reservation application. Prior to the advisory-reported fixed version 4.5.0, the database restoration feature fails to enforce or validate file paths. A user with administrator privileges can manipulate the input to read or delete arbitrary files on the server, causing sensitive file disclosure and denial of service through file deletion. The impact is amplified when the server runs with elevated privileges. The advisory reports this issue as fixed in version 4.5.0. |
| Asterisk is an open source private branch exchange and telephony toolkit. In affected deployments, an authenticated attacker may cause a `T.140 RED` heap buffer overflow using carefully crafted packets, potentially allowing remote code execution or causing Asterisk to crash. The `chan_sip` channel driver must be installed and configured, and its `textsupport` option must be enabled; `textsupport` defaults to no. `The chan_sip driver was deprecated in Asterisk 20 and completely removed in all later versions.` Repository comparisons verify patch containment in Asterisk 20.20.1, 21.12.3, 22.10.1 and 23.4.1, and Certified Asterisk 20.7-cert11 and 22.8-cert3. The affected release-track scope remains unresolved: structured metadata includes later release tracks even though the advisory says the required `chan_sip` driver was removed there. |
| Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, an unbounded `memcpy` of `OGG/Speex` packet data in `format_ogg_speex` can cause a heap buffer overflow and crash Asterisk when reading a file containing corrupted Speex audio. The attacker must create the file and make it available to Asterisk either through sufficiently elevated privileges or by convincing an Asterisk administrator to make it available. Asterisk must also be configured to play that file. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3. |
| Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, a NULL pointer dereference in the `Asterisk Manager Interface (AMI)` may allow an unauthenticated attacker to crash Asterisk when `Digest Authentication` is used via `HTTP`. The Asterisk `HTTP` web server, AMI, and AMI access via `HTTP` must all be enabled; each is disabled by default. The attacker must be able to connect to the `HTTP` server, which binds only to `127.0.0.1` by default even when enabled. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3. |
| Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, an out-of-bounds write in `chan_unistim` `DIALPAGE` digit handling can overflow the `phone_number` field and crash Asterisk when an attacker sends a carefully crafted incoming request packet. The `chan_unistim` module must be loaded and configured with a valid `UNISTIM UDP port` that the attacker can reach. The attacker must register as a configured `phone MAC`, or the deployment must have an equivalent `production/autoprovisioning` path that allows the client to reach the main page. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3. |
| Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, an unbounded `sscanf` in `res_pjsip_pubsub` when parsing the `MWI NOTIFY` `Message-Account` field may allow an unauthenticated attacker to send a carefully crafted packet that causes a stack buffer overflow and corrupts the underlying transport, permanently disabling all SIP functionality. An Asterisk restart is required to restore full operation. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3. |
| Knative pkg provides common packages shared across Knative repositories. Prior to 0.0.0-20260531000007-52dbd5ece63f, the knative.dev/pkg/webhook admissionHandler in webhook/admission.go decodes an attacker-supplied AdmissionReview through json.NewDecoder(io.TeeReader(r.Body, &bodyBuffer)) under an http.HandlerFunc without an http.MaxBytesReader or equivalent body-size limit. A pod-network client can send one oversized POST to an admission webhook, causing the decoder and bodyBuffer to retain amplified copies of the request until the controller pod exhausts memory and is OOM-killed. Every downstream consumer using the shared webhook server inherits the vulnerable behavior, including Knative, Tekton, KEDA, Sigstore policy-controller, and Kpack. For consumers configured with failurePolicy=Fail, loss of the controller can interrupt admission; with failurePolicy=Ignore, the affected webhook is unavailable while other admissions continue. This issue is fixed in version 0.0.0-20260531000007-52dbd5ece63f. |
| Zohocorp ManageEngine Password Manager Pro versions before 13236 and PAM360 versions before 8601 are vulnerable to an authenticated Remote Code Execution vulnerability. |
| Stored cross-site scripting (XSS) in the HTML report generator in the aidlc-traceability CLI in AWS AI-DLC Workflows before 2026-07-03 might allow an actor who can modify a project's AI-DLC artifact files to execute arbitrary script in the browser of a user who opens a generated HTML traceability report via crafted artifact titles or descriptions.
To remediate this issue, users should remove any local copy of the aidlc-traceability CLI obtained before 2026-07-03, or update it to commit 96cf0ea or later. The CLI was removed from the repository on 2026-07-16. |
| Prefab UI's Generative UI sandbox runs caller-supplied Python inside Pyodide, Python compiled to WebAssembly, in a Deno subprocess. The feature is documented as isolation for untrusted code, including LLM-written UI. From prefab-ui 0.14.0 through 0.20.2 the launcher starts Deno with unrestricted --allow-read, --allow-write, and --allow-net, and the runner leaves the Deno API on the JavaScript global object. Pyodide's js module proxies that global, so the Python can call Deno.readTextFileSync and Deno.writeTextFileSync. A caller who can supply the code can read and write files as the server OS user, and can persist code execution by writing a .pth file into the server virtualenv's site-packages. The usual remote path is FastMCP's GenerativeUI provider, which registers the MCP tool generate_prefab_ui and forwards that tool's code argument into this sandbox. On a FastMCP server with no authentication configured, any client who can reach the server can call the tool. With authentication, any client allowed to call tools can. Generative UI is opt-in, and the host must have Deno installed. Confirmed on prefab-ui 0.20.2. Fixed in 0.21.0: after the runtime and Prefab sources load, the runner revokes Deno read, write, and network permission before it accepts code, the process is started with --no-prompt so a permission request cannot grant them again, and bootstrap network access is limited to cdn.jsdelivr.net. The fix is commit 030f074 (pull request 538). |
| A Beta9 tenant can attach a volume when deploying a function, endpoint, or task queue. The gateway builds the host path by joining the shared volumes root, the workspace name, and the volume identifier from the stub configuration. Nothing checks that the identifier names a volume that workspace owns. Parent-directory segments in the identifier collapse the joined path to the worker's filesystem root, and the worker bind-mounts that path into the sandbox read-write unless the volume was explicitly marked read-only. A tenant with a workspace token can therefore read and write the worker's files, including other tenants' volumes stored on that machine. Confirmed against gateway 0.1.769 and worker 0.1.745. Fixed in gateway 0.1.776 and worker 0.1.756: volume identifiers and mount paths are validated before a mount is built, including for stubs saved before the check existed, and the gateway rejects a volume that does not exist or is not owned by the workspace. |
| The Beta9 worker serves the sandbox file API from outside the container. getHostPathFromContainerPath turns the tenant's container path into a worker path. If the unresolved path starts with a mount destination, including the default upload mount at /tmp/.beta9, the remainder is joined onto that mount's source with filepath.Join, which cleans parent-directory segments after the prefix check. A long enough run of those segments names any absolute path on the worker. A path that matches no mount is joined onto the container root and opened in the worker's own filesystem, so an absolute symbolic link such as /var/run pointing at /run is followed against the worker root. Upload, download, stat, list, find-in-files, replace-in-files, and delete-file all call this helper. A tenant with a workspace token and one running sandbox can read, write, list, and delete files on the hosting worker as root, including files of other tenants on that machine. A read-only proof downloaded the worker pod's Kubernetes service account token through the file API for a path that did not exist inside the sandbox. In the shipped remote-node manifests that service account is bound to cluster-admin. Fixed in worker 0.1.756: sandbox file operations and workspace sync open paths with os.OpenRoot, so parent-directory and symlink lookups stay inside the container root or the mount source. |
