| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| virtualenv is a tool for creating isolated virtual python environments. From 21.14.9 until 21.14.13, the bash bin/activate script can copy an attacker-controlled --prompt value into PS1 without escaping dollar signs or backticks when both promptvars and POSIX mode are disabled during activation. Re-enabling promptvars, running set -o posix, or starting an interactive child bash that inherits the exported PS1 can then expand command substitution in the stored VIRTUAL_ENV_PROMPT value and execute commands as the user who activates the environment. This issue is fixed in version 21.14.13. |
| The Nuvoton NPCX eSPI driver parses Target-Attached-Flash (TAF) requests in espi_taf_parse() (drivers/espi/espi_npcx.c), taking the 12-bit length field directly out of the request header in the FLASHRXBUF FIFO. For write and RPMC OP1 requests it copied DIV_ROUND_UP(len, 4) words into struct espi_taf_pckt.src, a fixed 16-word (64-byte) member of a static structure, without ever comparing the length against that buffer or against the negotiated eSPI receive payload size (rx-plsize, 64 bytes on all in-tree NPCX/NPCK SoCs). Both the loop counter and the word count were uint8_t, so the copy ran up to 255 iterations.
An eSPI controller that emits a flash request whose header claims a payload larger than the negotiated maximum therefore drives up to 239 32-bit stores past the end of the structure — roughly 956 bytes of out-of-bounds write into .bss — from the eSPI flash receive interrupt handler, while the source reads walk past the end of the 18-word FLASHRXBUF register array into neighbouring eSPI registers. The same unvalidated length was then passed on to flash_write() in espi_taf_npcx_flash_write() with the 64-byte src buffer as source, reading up to 4 KB of adjacent controller SRAM into SPI flash at a host-chosen address, where the host can read it back. A related fixed-size stack buffer in taf_npcx_completion_handler() was overflowed by four bytes on the maximum-size completion path on SoCs whose tx-plsize is 64.
The defect is reachable only from the eSPI host side, and only by a request that violates the negotiated payload size, so it requires host firmware or bus-level control rather than ordinary host software; a compliant maximum-length write fits the buffer exactly and is handled correctly. Because TAF exists specifically so that the embedded controller arbitrates host access to shared flash (espi_taf_check_read_protect() / espi_taf_check_write_protect()), corrupting controller memory from a host-supplied field crosses the trust boundary the feature asserts; consequences range from controller crash or hang to corruption of driver state that gates the flash protection regions.
The fix widens the counters, rejects any request whose word count exceeds both ARRAY_SIZE(FLASHRXBUF) - NPCX_ESPI_FLASH_HEADER_ADDRESS_LEN and NPCX_TAF_RX_PAYLOAD_WORDS (derived from the devicetree rx-plsize), marks such packets with a new invalid_flag so espi_taf_work() answers them with an unsuccessful completion instead of processing them, bounds the transmit payload against FLASHTXBUF, and adds a default case for unsupported cycle types. Only configurations with CONFIG_ESPI_TAF enabled on an NPCX/NPCK target are affected; no in-tree board enables it by default. |
| Vulnerability in the Oracle HTTP Server product of Oracle Fusion Middleware (component: OSSL Module). The supported version that is affected is 12.2.1.4.0. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where Oracle HTTP Server executes to compromise Oracle HTTP Server. Successful attacks of this vulnerability can result in takeover of Oracle HTTP Server. CVSS 3.1 Base Score 7.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: 2D). Supported versions that are affected are Oracle Java SE: 8u503, 8u503-perf, 11.0.32.1, 17.0.20.1, 21.0.12.1, 25.0.4.1, 27; Oracle GraalVM for JDK: 17.0.20.1 and 21.0.12.1; Oracle GraalVM Enterprise Edition: 21.3.19.1.1. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition as well as unauthorized update, insert or delete access to some of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data and unauthorized read access to a subset of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 7.0 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:H). |
| snap7 through 1.4.3 contains an out-of-bounds write vulnerability in TSnap7MicroClient::opReadArea() that allows malicious S7 peers to overflow client buffers via an unchecked DataLength field. Rogue or impersonated PLCs can return crafted ReadVar responses causing memcpy of up to 65535 bytes into caller buffers, crashing SCADA, HMI, or gateway processes and corrupting memory. |
| An issue in @justice8096/sagemath-mcp-server 1.0.1 allows a remote attacker to execute arbitrary code via the escapeShellString and sanitizeCode functions. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: midi2: Fix the jack descriptor array sizes
The jack in/out descriptor arrays in struct f_midi2_usb_config have
the size of MAX_CABLES, which look reasonable -- but it turned out to
be incorrect. Namely, the entries for those arrays are added from
both inputs and outputs, hence for each loop cycle, it adds two, ended
up with as twice as the expected size. This inconsistency may result
in potential OOB when a large number of jacks are set up via configfs,
although the max number of cables (the loop count) is limited to
MAX_CABLES.
For addressing it, correct the jack_ins & jack_outs array sizes to
twice, MAX_CABLES * 2. |
| Improper Neutralization of Special
Elements used in an OS Command (“OS Command Injection”) and Cross-Site Request
Forgery (CSRF) in an ASUS router model allow an attacker to trick a logged-in
administrator into visiting a phishing website, causing the router to execute
arbitrary commands with root privileges.
Refer to the '
Security Update for ASUS Router Firmware ' section on the ASUS Security Advisory for more information. |
| Out-of-bounds write in Windows Fast FAT Driver allows an authorized attacker to elevate privileges locally. |
| Snap7 through 1.4.3 contains an out-of-bounds write vulnerability in the passive partner that allows a malicious active partner to overflow application buffers by declaring an unvalidated BSend total length. Attackers connecting from the configured peer address can declare up to 65535 bytes and send a short fragment, causing BRecv to memcpy past the buffer and crash or corrupt SCADA, HMI or gateway processes. |
| Ghidra through 12.2 contains an uncontrolled memory allocation vulnerability in BinaryField.read() that allows attackers to exhaust heap memory via an unchecked 32-bit length field. Attackers can persuade users to import a crafted GZF packed database file, triggering an OutOfMemoryError in PackedDatabase.open() that aborts the import and denies service. |
| Vyper from 0.2.13 before 0.2.15 allocates storage slots for @nonreentrant reentrancy locks at the same locations as contract storage variables. When a function using @nonreentrant is called, setting the lock overwrites the overlapping storage variable, corrupting contract state and breaking the contract's intended logic. |
| An Out-of-bounds Write vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an eBGP peer which has not negotiated four-octet-AS capability sending a specifically malformed BGP update to cause a Denial-of-Service (DoS). |
| The SOAP HTTP client guards its response buffer growth with a check that relies on signed integer overflow, which is undefined behaviour and is not guaranteed to trigger. When the check is optimised away, a malicious SOAP server can make the client allocate a buffer far smaller than the data it then writes into it, producing a heap buffer overflow. |
| A Code Injection exists in treekill on Windows which allows a remote code execution when an attacker is able to control the input into the command. |
| PraisonAI is a multi-agent teams system. From version 4.6.10 to before version 4.6.59, LocalManagedAgent / SandboxedAgent compute bridging wraps read_file, list_files, and write_file when a compute provider is attached. The bridge converts those file operations into shell command strings using raw path arguments, then sends those strings to shell-backed compute providers. An attacker who can influence a file-tool path argument can break out of the quoted path and execute arbitrary shell commands in the compute environment. With compute="local", commands execute through the local subprocess compute provider on the host. With Docker, commands execute in the container. This issue has been patched in version 4.6.59. |
| Netgate pfSense CE 2.7.0 through 2.9.0 contains an OS command injection vulnerability that allows authenticated users with QinQ edit privilege to run commands by storing an unvalidated parent interface name. Attackers can save a crafted 'if' value, then edit the QinQ entry so it is interpolated into ifconfig shell commands, executing commands as root. |
| OPNsense is a FreeBSD based firewall and routing platform. Prior to version 26.1.11, the Firewall Alias GeoIP importer's process_zip() and process_gzip() paths in src/opnsense/scripts/filter/lib/alias/geoip.py use an unvalidated CSV country_code value to construct output filenames below /usr/local/share/GeoIP/alias. A user with Firewall Alias Edit privilege can configure an attacker-controlled GeoIP source URL and supply an archive whose country code traverses into another existing directory, causing attacker-controlled content to be written as root with an -IPv4 or -IPv6 suffix. A crafted newsyslog fragment and oversized log file can use the default hourly root cron job to execute commands as root, resulting in complete firewall compromise. This issue is fixed in version 26.1.11. |
| A flaw was found in spice-server. Multiple migration data handlers use client-supplied offsets from SPICE_MSGC_MIGRATE_DATA messages without bounds validation, allowing a malicious authenticated SPICE client during VM live migration to read arbitrary heap memory or trigger heap corruption via out-of-bounds read and write operations on the message buffer. |
| OS command injection in the Terraform hook in AWS SAM CLI before 1.166.2 might allow an actor who can influence the Terraform configuration or plan file consumed by a build to execute arbitrary commands as the build user on the host running the build via a crafted Terraform resource address.
To remediate this issue, users should upgrade to version 1.166.2 or later. |
