| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Add RCU read lock protection to perf_iterate_ctx()
The perf_iterate_ctx() function performs RCU list traversal but
currently lacks RCU read lock protection. This causes lockdep warnings
when running perf probe with unshare(1) under CONFIG_PROVE_RCU_LIST=y:
WARNING: suspicious RCU usage
kernel/events/core.c:8168 RCU-list traversed in non-reader section!!
Call Trace:
lockdep_rcu_suspicious
? perf_event_addr_filters_apply
perf_iterate_ctx
perf_event_exec
begin_new_exec
? load_elf_phdrs
load_elf_binary
? lock_acquire
? find_held_lock
? bprm_execve
bprm_execve
do_execveat_common.isra.0
__x64_sys_execve
do_syscall_64
entry_SYSCALL_64_after_hwframe
This protection was previously present but was removed in commit
bd2756811766 ("perf: Rewrite core context handling"). Add back the
necessary rcu_read_lock()/rcu_read_unlock() pair around
perf_iterate_ctx() call in perf_event_exec().
[ mingo: Use scoped_guard() as suggested by Peter ] |
| In the Linux kernel, the following vulnerability has been resolved:
net: better track kernel sockets lifetime
While kernel sockets are dismantled during pernet_operations->exit(),
their freeing can be delayed by any tx packets still held in qdisc
or device queues, due to skb_set_owner_w() prior calls.
This then trigger the following warning from ref_tracker_dir_exit() [1]
To fix this, make sure that kernel sockets own a reference on net->passive.
Add sk_net_refcnt_upgrade() helper, used whenever a kernel socket
is converted to a refcounted one.
[1]
[ 136.263918][ T35] ref_tracker: net notrefcnt@ffff8880638f01e0 has 1/2 users at
[ 136.263918][ T35] sk_alloc+0x2b3/0x370
[ 136.263918][ T35] inet6_create+0x6ce/0x10f0
[ 136.263918][ T35] __sock_create+0x4c0/0xa30
[ 136.263918][ T35] inet_ctl_sock_create+0xc2/0x250
[ 136.263918][ T35] igmp6_net_init+0x39/0x390
[ 136.263918][ T35] ops_init+0x31e/0x590
[ 136.263918][ T35] setup_net+0x287/0x9e0
[ 136.263918][ T35] copy_net_ns+0x33f/0x570
[ 136.263918][ T35] create_new_namespaces+0x425/0x7b0
[ 136.263918][ T35] unshare_nsproxy_namespaces+0x124/0x180
[ 136.263918][ T35] ksys_unshare+0x57d/0xa70
[ 136.263918][ T35] __x64_sys_unshare+0x38/0x40
[ 136.263918][ T35] do_syscall_64+0xf3/0x230
[ 136.263918][ T35] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 136.263918][ T35]
[ 136.343488][ T35] ref_tracker: net notrefcnt@ffff8880638f01e0 has 1/2 users at
[ 136.343488][ T35] sk_alloc+0x2b3/0x370
[ 136.343488][ T35] inet6_create+0x6ce/0x10f0
[ 136.343488][ T35] __sock_create+0x4c0/0xa30
[ 136.343488][ T35] inet_ctl_sock_create+0xc2/0x250
[ 136.343488][ T35] ndisc_net_init+0xa7/0x2b0
[ 136.343488][ T35] ops_init+0x31e/0x590
[ 136.343488][ T35] setup_net+0x287/0x9e0
[ 136.343488][ T35] copy_net_ns+0x33f/0x570
[ 136.343488][ T35] create_new_namespaces+0x425/0x7b0
[ 136.343488][ T35] unshare_nsproxy_namespaces+0x124/0x180
[ 136.343488][ T35] ksys_unshare+0x57d/0xa70
[ 136.343488][ T35] __x64_sys_unshare+0x38/0x40
[ 136.343488][ T35] do_syscall_64+0xf3/0x230
[ 136.343488][ T35] entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Fix suspicious RCU usage
Commit <d74169ceb0d2> ("iommu/vt-d: Allocate DMAR fault interrupts
locally") moved the call to enable_drhd_fault_handling() to a code
path that does not hold any lock while traversing the drhd list. Fix
it by ensuring the dmar_global_lock lock is held when traversing the
drhd list.
Without this fix, the following warning is triggered:
=============================
WARNING: suspicious RCU usage
6.14.0-rc3 #55 Not tainted
-----------------------------
drivers/iommu/intel/dmar.c:2046 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 1
2 locks held by cpuhp/1/23:
#0: ffffffff84a67c50 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x87/0x2c0
#1: ffffffff84a6a380 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x87/0x2c0
stack backtrace:
CPU: 1 UID: 0 PID: 23 Comm: cpuhp/1 Not tainted 6.14.0-rc3 #55
Call Trace:
<TASK>
dump_stack_lvl+0xb7/0xd0
lockdep_rcu_suspicious+0x159/0x1f0
? __pfx_enable_drhd_fault_handling+0x10/0x10
enable_drhd_fault_handling+0x151/0x180
cpuhp_invoke_callback+0x1df/0x990
cpuhp_thread_fun+0x1ea/0x2c0
smpboot_thread_fn+0x1f5/0x2e0
? __pfx_smpboot_thread_fn+0x10/0x10
kthread+0x12a/0x2d0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x4a/0x60
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Holding the lock in enable_drhd_fault_handling() triggers a lockdep splat
about a possible deadlock between dmar_global_lock and cpu_hotplug_lock.
This is avoided by not holding dmar_global_lock when calling
iommu_device_register(), which initiates the device probe process. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/kbuf: reallocate buf lists on upgrade
IORING_REGISTER_PBUF_RING can reuse an old struct io_buffer_list if it
was created for legacy selected buffer and has been emptied. It violates
the requirement that most of the field should stay stable after publish.
Always reallocate it instead. |
| In the Linux kernel, the following vulnerability has been resolved:
net: xdp: Disallow attaching device-bound programs in generic mode
Device-bound programs are used to support RX metadata kfuncs. These
kfuncs are driver-specific and rely on the driver context to read the
metadata. This means they can't work in generic XDP mode. However, there
is no check to disallow such programs from being attached in generic
mode, in which case the metadata kfuncs will be called in an invalid
context, leading to crashes.
Fix this by adding a check to disallow attaching device-bound programs
in generic mode. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: use RCU protection in __ip_rt_update_pmtu()
__ip_rt_update_pmtu() must use RCU protection to make
sure the net structure it reads does not disappear. |
| In the Linux kernel, the following vulnerability has been resolved:
tls: stop recv() if initial process_rx_list gave us non-DATA
If we have a non-DATA record on the rx_list and another record of the
same type still on the queue, we will end up merging them:
- process_rx_list copies the non-DATA record
- we start the loop and process the first available record since it's
of the same type
- we break out of the loop since the record was not DATA
Just check the record type and jump to the end in case process_rx_list
did some work. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: check changes_pkt_data property for extension programs
When processing calls to global sub-programs, verifier decides whether
to invalidate all packet pointers in current state depending on the
changes_pkt_data property of the global sub-program.
Because of this, an extension program replacing a global sub-program
must be compatible with changes_pkt_data property of the sub-program
being replaced.
This commit:
- adds changes_pkt_data flag to struct bpf_prog_aux:
- this flag is set in check_cfg() for main sub-program;
- in jit_subprogs() for other sub-programs;
- modifies bpf_check_attach_btf_id() to check changes_pkt_data flag;
- moves call to check_attach_btf_id() after the call to check_cfg(),
because it needs changes_pkt_data flag to be set:
bpf_check:
... ...
- check_attach_btf_id resolve_pseudo_ldimm64
resolve_pseudo_ldimm64 --> bpf_prog_is_offloaded
bpf_prog_is_offloaded check_cfg
check_cfg + check_attach_btf_id
... ...
The following fields are set by check_attach_btf_id():
- env->ops
- prog->aux->attach_btf_trace
- prog->aux->attach_func_name
- prog->aux->attach_func_proto
- prog->aux->dst_trampoline
- prog->aux->mod
- prog->aux->saved_dst_attach_type
- prog->aux->saved_dst_prog_type
- prog->expected_attach_type
Neither of these fields are used by resolve_pseudo_ldimm64() or
bpf_prog_offload_verifier_prep() (for netronome and netdevsim
drivers), so the reordering is safe. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: track changes_pkt_data property for global functions
When processing calls to certain helpers, verifier invalidates all
packet pointers in a current state. For example, consider the
following program:
__attribute__((__noinline__))
long skb_pull_data(struct __sk_buff *sk, __u32 len)
{
return bpf_skb_pull_data(sk, len);
}
SEC("tc")
int test_invalidate_checks(struct __sk_buff *sk)
{
int *p = (void *)(long)sk->data;
if ((void *)(p + 1) > (void *)(long)sk->data_end) return TCX_DROP;
skb_pull_data(sk, 0);
*p = 42;
return TCX_PASS;
}
After a call to bpf_skb_pull_data() the pointer 'p' can't be used
safely. See function filter.c:bpf_helper_changes_pkt_data() for a list
of such helpers.
At the moment verifier invalidates packet pointers when processing
helper function calls, and does not traverse global sub-programs when
processing calls to global sub-programs. This means that calls to
helpers done from global sub-programs do not invalidate pointers in
the caller state. E.g. the program above is unsafe, but is not
rejected by verifier.
This commit fixes the omission by computing field
bpf_subprog_info->changes_pkt_data for each sub-program before main
verification pass.
changes_pkt_data should be set if:
- subprogram calls helper for which bpf_helper_changes_pkt_data
returns true;
- subprogram calls a global function,
for which bpf_subprog_info->changes_pkt_data should be set.
The verifier.c:check_cfg() pass is modified to compute this
information. The commit relies on depth first instruction traversal
done by check_cfg() and absence of recursive function calls:
- check_cfg() would eventually visit every call to subprogram S in a
state when S is fully explored;
- when S is fully explored:
- every direct helper call within S is explored
(and thus changes_pkt_data is set if needed);
- every call to subprogram S1 called by S was visited with S1 fully
explored (and thus S inherits changes_pkt_data from S1).
The downside of such approach is that dead code elimination is not
taken into account: if a helper call inside global function is dead
because of current configuration, verifier would conservatively assume
that the call occurs for the purpose of the changes_pkt_data
computation. |
| In the Linux kernel, the following vulnerability has been resolved:
block: RCU protect disk->conv_zones_bitmap
Ensure that a disk revalidation changing the conventional zones bitmap
of a disk does not cause invalid memory references when using the
disk_zone_is_conv() helper by RCU protecting the disk->conv_zones_bitmap
pointer.
disk_zone_is_conv() is modified to operate under the RCU read lock and
the function disk_set_conv_zones_bitmap() is added to update a disk
conv_zones_bitmap pointer using rcu_replace_pointer() with the disk
zone_wplugs_lock spinlock held.
disk_free_zone_resources() is modified to call
disk_update_zone_resources() with a NULL bitmap pointer to free the disk
conv_zones_bitmap. disk_set_conv_zones_bitmap() is also used in
disk_update_zone_resources() to set the new (revalidated) bitmap and
free the old one. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: check return value of sock_recvmsg when draining clc data
When receiving clc msg, the field length in smc_clc_msg_hdr indicates the
length of msg should be received from network and the value should not be
fully trusted as it is from the network. Once the value of length exceeds
the value of buflen in function smc_clc_wait_msg it may run into deadloop
when trying to drain the remaining data exceeding buflen.
This patch checks the return value of sock_recvmsg when draining data in
case of deadloop in draining. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: VMX: Bury Intel PT virtualization (guest/host mode) behind CONFIG_BROKEN
Hide KVM's pt_mode module param behind CONFIG_BROKEN, i.e. disable support
for virtualizing Intel PT via guest/host mode unless BROKEN=y. There are
myriad bugs in the implementation, some of which are fatal to the guest,
and others which put the stability and health of the host at risk.
For guest fatalities, the most glaring issue is that KVM fails to ensure
tracing is disabled, and *stays* disabled prior to VM-Enter, which is
necessary as hardware disallows loading (the guest's) RTIT_CTL if tracing
is enabled (enforced via a VMX consistency check). Per the SDM:
If the logical processor is operating with Intel PT enabled (if
IA32_RTIT_CTL.TraceEn = 1) at the time of VM entry, the "load
IA32_RTIT_CTL" VM-entry control must be 0.
On the host side, KVM doesn't validate the guest CPUID configuration
provided by userspace, and even worse, uses the guest configuration to
decide what MSRs to save/load at VM-Enter and VM-Exit. E.g. configuring
guest CPUID to enumerate more address ranges than are supported in hardware
will result in KVM trying to passthrough, save, and load non-existent MSRs,
which generates a variety of WARNs, ToPA ERRORs in the host, a potential
deadlock, etc. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: sync_linked_regs() must preserve subreg_def
Range propagation must not affect subreg_def marks, otherwise the
following example is rewritten by verifier incorrectly when
BPF_F_TEST_RND_HI32 flag is set:
0: call bpf_ktime_get_ns call bpf_ktime_get_ns
1: r0 &= 0x7fffffff after verifier r0 &= 0x7fffffff
2: w1 = w0 rewrites w1 = w0
3: if w0 < 10 goto +0 --------------> r11 = 0x2f5674a6 (r)
4: r1 >>= 32 r11 <<= 32 (r)
5: r0 = r1 r1 |= r11 (r)
6: exit; if w0 < 0xa goto pc+0
r1 >>= 32
r0 = r1
exit
(or zero extension of w1 at (2) is missing for architectures that
require zero extension for upper register half).
The following happens w/o this patch:
- r0 is marked as not a subreg at (0);
- w1 is marked as subreg at (2);
- w1 subreg_def is overridden at (3) by copy_register_state();
- w1 is read at (5) but mark_insn_zext() does not mark (2)
for zero extension, because w1 subreg_def is not set;
- because of BPF_F_TEST_RND_HI32 flag verifier inserts random
value for hi32 bits of (2) (marked (r));
- this random value is read at (5). |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/sve: Discard stale CPU state when handling SVE traps
The logic for handling SVE traps manipulates saved FPSIMD/SVE state
incorrectly, and a race with preemption can result in a task having
TIF_SVE set and TIF_FOREIGN_FPSTATE clear even though the live CPU state
is stale (e.g. with SVE traps enabled). This has been observed to result
in warnings from do_sve_acc() where SVE traps are not expected while
TIF_SVE is set:
| if (test_and_set_thread_flag(TIF_SVE))
| WARN_ON(1); /* SVE access shouldn't have trapped */
Warnings of this form have been reported intermittently, e.g.
https://lore.kernel.org/linux-arm-kernel/CA+G9fYtEGe_DhY2Ms7+L7NKsLYUomGsgqpdBj+QwDLeSg=JhGg@mail.gmail.com/
https://lore.kernel.org/linux-arm-kernel/000000000000511e9a060ce5a45c@google.com/
The race can occur when the SVE trap handler is preempted before and
after manipulating the saved FPSIMD/SVE state, starting and ending on
the same CPU, e.g.
| void do_sve_acc(unsigned long esr, struct pt_regs *regs)
| {
| // Trap on CPU 0 with TIF_SVE clear, SVE traps enabled
| // task->fpsimd_cpu is 0.
| // per_cpu_ptr(&fpsimd_last_state, 0) is task.
|
| ...
|
| // Preempted; migrated from CPU 0 to CPU 1.
| // TIF_FOREIGN_FPSTATE is set.
|
| get_cpu_fpsimd_context();
|
| if (test_and_set_thread_flag(TIF_SVE))
| WARN_ON(1); /* SVE access shouldn't have trapped */
|
| sve_init_regs() {
| if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) {
| ...
| } else {
| fpsimd_to_sve(current);
| current->thread.fp_type = FP_STATE_SVE;
| }
| }
|
| put_cpu_fpsimd_context();
|
| // Preempted; migrated from CPU 1 to CPU 0.
| // task->fpsimd_cpu is still 0
| // If per_cpu_ptr(&fpsimd_last_state, 0) is still task then:
| // - Stale HW state is reused (with SVE traps enabled)
| // - TIF_FOREIGN_FPSTATE is cleared
| // - A return to userspace skips HW state restore
| }
Fix the case where the state is not live and TIF_FOREIGN_FPSTATE is set
by calling fpsimd_flush_task_state() to detach from the saved CPU
state. This ensures that a subsequent context switch will not reuse the
stale CPU state, and will instead set TIF_FOREIGN_FPSTATE, forcing the
new state to be reloaded from memory prior to a return to userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-rq-qos: fix crash on rq_qos_wait vs. rq_qos_wake_function race
We're seeing crashes from rq_qos_wake_function that look like this:
BUG: unable to handle page fault for address: ffffafe180a40084
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 100000067 P4D 100000067 PUD 10027c067 PMD 10115d067 PTE 0
Oops: Oops: 0002 [#1] PREEMPT SMP PTI
CPU: 17 UID: 0 PID: 0 Comm: swapper/17 Not tainted 6.12.0-rc3-00013-geca631b8fe80 #11
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:_raw_spin_lock_irqsave+0x1d/0x40
Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 9c 41 5c fa 65 ff 05 62 97 30 4c 31 c0 ba 01 00 00 00 <f0> 0f b1 17 75 0a 4c 89 e0 41 5c c3 cc cc cc cc 89 c6 e8 2c 0b 00
RSP: 0018:ffffafe180580ca0 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffffafe180a3f7a8 RCX: 0000000000000011
RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffffafe180a40084
RBP: 0000000000000000 R08: 00000000001e7240 R09: 0000000000000011
R10: 0000000000000028 R11: 0000000000000888 R12: 0000000000000002
R13: ffffafe180a40084 R14: 0000000000000000 R15: 0000000000000003
FS: 0000000000000000(0000) GS:ffff9aaf1f280000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffafe180a40084 CR3: 000000010e428002 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
try_to_wake_up+0x5a/0x6a0
rq_qos_wake_function+0x71/0x80
__wake_up_common+0x75/0xa0
__wake_up+0x36/0x60
scale_up.part.0+0x50/0x110
wb_timer_fn+0x227/0x450
...
So rq_qos_wake_function() calls wake_up_process(data->task), which calls
try_to_wake_up(), which faults in raw_spin_lock_irqsave(&p->pi_lock).
p comes from data->task, and data comes from the waitqueue entry, which
is stored on the waiter's stack in rq_qos_wait(). Analyzing the core
dump with drgn, I found that the waiter had already woken up and moved
on to a completely unrelated code path, clobbering what was previously
data->task. Meanwhile, the waker was passing the clobbered garbage in
data->task to wake_up_process(), leading to the crash.
What's happening is that in between rq_qos_wake_function() deleting the
waitqueue entry and calling wake_up_process(), rq_qos_wait() is finding
that it already got a token and returning. The race looks like this:
rq_qos_wait() rq_qos_wake_function()
==============================================================
prepare_to_wait_exclusive()
data->got_token = true;
list_del_init(&curr->entry);
if (data.got_token)
break;
finish_wait(&rqw->wait, &data.wq);
^- returns immediately because
list_empty_careful(&wq_entry->entry)
is true
... return, go do something else ...
wake_up_process(data->task)
(NO LONGER VALID!)-^
Normally, finish_wait() is supposed to synchronize against the waker.
But, as noted above, it is returning immediately because the waitqueue
entry has already been removed from the waitqueue.
The bug is that rq_qos_wake_function() is accessing the waitqueue entry
AFTER deleting it. Note that autoremove_wake_function() wakes the waiter
and THEN deletes the waitqueue entry, which is the proper order.
Fix it by swapping the order. We also need to use
list_del_init_careful() to match the list_empty_careful() in
finish_wait(). |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: Revert "scsi: core: Do not increase scsi_device's iorequest_cnt if dispatch failed"
The "atomic_inc(&cmd->device->iorequest_cnt)" in scsi_queue_rq() would
cause kernel panic because cmd->device may be freed after returning from
scsi_dispatch_cmd().
This reverts commit cfee29ffb45b1c9798011b19d454637d1b0fe87d. |
| In the Linux kernel, the following vulnerability has been resolved:
bus: mhi: host: Range check CHDBOFF and ERDBOFF
If the value read from the CHDBOFF and ERDBOFF registers is outside the
range of the MHI register space then an invalid address might be computed
which later causes a kernel panic. Range check the read value to prevent
a crash due to bad data from the device. |
| In the Linux kernel, the following vulnerability has been resolved:
fprobe: Release rethook after the ftrace_ops is unregistered
While running bpf selftests it's possible to get following fault:
general protection fault, probably for non-canonical address \
0x6b6b6b6b6b6b6b6b: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC NOPTI
...
Call Trace:
<TASK>
fprobe_handler+0xc1/0x270
? __pfx_bpf_testmod_init+0x10/0x10
? __pfx_bpf_testmod_init+0x10/0x10
? bpf_fentry_test1+0x5/0x10
? bpf_fentry_test1+0x5/0x10
? bpf_testmod_init+0x22/0x80
? do_one_initcall+0x63/0x2e0
? rcu_is_watching+0xd/0x40
? kmalloc_trace+0xaf/0xc0
? do_init_module+0x60/0x250
? __do_sys_finit_module+0xac/0x120
? do_syscall_64+0x37/0x90
? entry_SYSCALL_64_after_hwframe+0x72/0xdc
</TASK>
In unregister_fprobe function we can't release fp->rethook while it's
possible there are some of its users still running on another cpu.
Moving rethook_free call after fp->ops is unregistered with
unregister_ftrace_function call. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmgenet: Add a check for oversized packets
Occasionnaly we may get oversized packets from the hardware which
exceed the nomimal 2KiB buffer size we allocate SKBs with. Add an early
check which drops the packet to avoid invoking skb_over_panic() and move
on to processing the next packet. |
| In the Linux kernel, the following vulnerability has been resolved:
jbd2: check 'jh->b_transaction' before removing it from checkpoint
Following process will corrupt ext4 image:
Step 1:
jbd2_journal_commit_transaction
__jbd2_journal_insert_checkpoint(jh, commit_transaction)
// Put jh into trans1->t_checkpoint_list
journal->j_checkpoint_transactions = commit_transaction
// Put trans1 into journal->j_checkpoint_transactions
Step 2:
do_get_write_access
test_clear_buffer_dirty(bh) // clear buffer dirty，set jbd dirty
__jbd2_journal_file_buffer(jh, transaction) // jh belongs to trans2
Step 3:
drop_cache
journal_shrink_one_cp_list
jbd2_journal_try_remove_checkpoint
if (!trylock_buffer(bh)) // lock bh, true
if (buffer_dirty(bh)) // buffer is not dirty
__jbd2_journal_remove_checkpoint(jh)
// remove jh from trans1->t_checkpoint_list
Step 4:
jbd2_log_do_checkpoint
trans1 = journal->j_checkpoint_transactions
// jh is not in trans1->t_checkpoint_list
jbd2_cleanup_journal_tail(journal) // trans1 is done
Step 5: Power cut, trans2 is not committed, jh is lost in next mounting.
Fix it by checking 'jh->b_transaction' before remove it from checkpoint. |
