| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Kylin.
This issue affects Apache Kylin: from 4 through 5.0.4.
Users are recommended to upgrade to version 5.0.5, which fixes the issue. |
| Exposure of Job Discard to an Unauthorized Actor vulnerability in Apache Kylin. Impact most to the kylin services that are directly exposed to public network, which is not common. In-house kylin deployments are mostly not impacted.
This issue affects Apache Kylin: from 4 through 5.0.4.
Users are recommended to upgrade to version 5.0.5, which fixes the issue. |
| Missing Authorization vulnerability in Apache Kylin. A backend metadata dump API misses the enough authorization and the path-confinement. Impact most to the kylin services that are directly exposed to public network, which is not common. In-house kylin deployments are mostly not impacted.
This issue affects Apache Kylin: from 4 through 5.0.4.
Users are recommended to upgrade to version 5.0.5, which fixes the issue. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel SMB component.
This issue affects Apache Camel: from 4.2.0 before 4.18.5, from 4.19.0 before 4.22.1.
The Camel remote-file consumers poll a directory on a remote server and build the absolute remote path of each file by concatenating the configured directory with the file name reported in the server's directory listing. That concatenation (FtpUtils.absoluteFilePath and GenericFileConsumer) applied no lexical normalization and no check that the result stayed inside the directory being polled, and the resulting path became the operand for every subsequent remote operation on the file: retrieval (FtpOperations.retrieveFile / SftpOperations, reached from GenericFileConsumer where the retrieve name is taken verbatim from GenericFile.getAbsoluteFilePath), deletion when delete=true (GenericFileDeleteProcessStrategy), and renaming when move, preMove, moveFailed or readLock=rename is configured (GenericFileProcessStrategySupport and GenericFileRenameExclusiveReadLockStrategy). Neither isValidFile nor isMatched performed any containment check. A listing entry that is not a single path segment therefore resolved to a path outside the configured polling directory, causing Camel to read, delete or rename files outside it using the endpoint's own credentials. A listing name is not route-controlled data. It is supplied by the remote server, and the FTP control channel carries no integrity protection at all, so an on-path attacker can rewrite a LIST response without holding any credentials; a compromised, malicious or multi-tenant server, or a server backed by a virtual filesystem, can emit such a name directly. Retrieval is reachable in a default consumer configuration, since the remote consumers download every listed file; deletion and renaming additionally require one of the disposition options above, all of which are common. Escape from the directory Camel was configured to poll is unconditional, while escape from the server's own account boundary additionally depends on whether that server confines the account. The jailStartingDirectory option, which is documented as restricting Camel to the starting directory and is enabled by default, governed producer writes and, since the localWorkDirectory containment work, consumer downloads to the local work directory - but it did not constrain this remote operand, so its name and description claimed a boundary that was not enforced here. The same entry point had already been recognised on the local side: the localWorkDirectory download path was constrained so that a remote file name containing parent-directory segments could not resolve outside the local work directory. The remote operand was the remaining half of that surface. This artifact provides the smb scheme. Its consumer walks the share listing on its own rather than through RemoteFileConsumer, skipping only the exact "." and ".." entries, so a name carrying traversal segments in any other form was concatenated unchecked. Reaching it requires a server that emits a listing name which is not a single path segment, which a conforming SMB2 implementation does not do; the exposure was corrected on the same basis as the other remote-file consumers rather than from a demonstrated proof of concept against this scheme.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. The 4.14.x stream reached end of life and does not receive this fix; users on it should move to a supported releases stream. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel Mina SFTP component.
This issue affects Apache Camel: from 4.18.0 before 4.18.5, from 4.19.0 before 4.22.1.
The Camel remote-file consumers poll a directory on a remote server and build the absolute remote path of each file by concatenating the configured directory with the file name reported in the server's directory listing. That concatenation (FtpUtils.absoluteFilePath and GenericFileConsumer) applied no lexical normalization and no check that the result stayed inside the directory being polled, and the resulting path became the operand for every subsequent remote operation on the file: retrieval (FtpOperations.retrieveFile / SftpOperations, reached from GenericFileConsumer where the retrieve name is taken verbatim from GenericFile.getAbsoluteFilePath), deletion when delete=true (GenericFileDeleteProcessStrategy), and renaming when move, preMove, moveFailed or readLock=rename is configured (GenericFileProcessStrategySupport and GenericFileRenameExclusiveReadLockStrategy). Neither isValidFile nor isMatched performed any containment check. A listing entry that is not a single path segment therefore resolved to a path outside the configured polling directory, causing Camel to read, delete or rename files outside it using the endpoint's own credentials. A listing name is not route-controlled data. It is supplied by the remote server, and the FTP control channel carries no integrity protection at all, so an on-path attacker can rewrite a LIST response without holding any credentials; a compromised, malicious or multi-tenant server, or a server backed by a virtual filesystem, can emit such a name directly. Retrieval is reachable in a default consumer configuration, since the remote consumers download every listed file; deletion and renaming additionally require one of the disposition options above, all of which are common. Escape from the directory Camel was configured to poll is unconditional, while escape from the server's own account boundary additionally depends on whether that server confines the account. The jailStartingDirectory option, which is documented as restricting Camel to the starting directory and is enabled by default, governed producer writes and, since the localWorkDirectory containment work, consumer downloads to the local work directory - but it did not constrain this remote operand, so its name and description claimed a boundary that was not enforced here. The same entry point had already been recognised on the local side: the localWorkDirectory download path was constrained so that a remote file name containing parent-directory segments could not resolve outside the local work directory. The remote operand was the remaining half of that surface. This artifact provides the mina-sftp scheme, an alternative SFTP implementation whose consumer derives from the same RemoteFileConsumer base class and therefore inherited the same unconstrained resolution.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. The 4.14.x stream reached end of life and does not receive this fix; users on it should move to a supported releases stream. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel FTP component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
The Camel remote-file consumers poll a directory on a remote server and build the absolute remote path of each file by concatenating the configured directory with the file name reported in the server's directory listing. That concatenation (FtpUtils.absoluteFilePath and GenericFileConsumer) applied no lexical normalization and no check that the result stayed inside the directory being polled, and the resulting path became the operand for every subsequent remote operation on the file: retrieval (FtpOperations.retrieveFile / SftpOperations, reached from GenericFileConsumer where the retrieve name is taken verbatim from GenericFile.getAbsoluteFilePath), deletion when delete=true (GenericFileDeleteProcessStrategy), and renaming when move, preMove, moveFailed or readLock=rename is configured (GenericFileProcessStrategySupport and GenericFileRenameExclusiveReadLockStrategy). Neither isValidFile nor isMatched performed any containment check. A listing entry that is not a single path segment therefore resolved to a path outside the configured polling directory, causing Camel to read, delete or rename files outside it using the endpoint's own credentials. A listing name is not route-controlled data. It is supplied by the remote server, and the FTP control channel carries no integrity protection at all, so an on-path attacker can rewrite a LIST response without holding any credentials; a compromised, malicious or multi-tenant server, or a server backed by a virtual filesystem, can emit such a name directly. Retrieval is reachable in a default consumer configuration, since the remote consumers download every listed file; deletion and renaming additionally require one of the disposition options above, all of which are common. Escape from the directory Camel was configured to poll is unconditional, while escape from the server's own account boundary additionally depends on whether that server confines the account. The jailStartingDirectory option, which is documented as restricting Camel to the starting directory and is enabled by default, governed producer writes and, since the localWorkDirectory containment work, consumer downloads to the local work directory - but it did not constrain this remote operand, so its name and description claimed a boundary that was not enforced here. The same entry point had already been recognised on the local side: the localWorkDirectory download path was constrained so that a remote file name containing parent-directory segments could not resolve outside the local work directory. The remote operand was the remaining half of that surface. This artifact provides the ftp, ftps and sftp schemes, all of which are affected. The reporter demonstrated the issue end to end against an ftp endpoint, driving a Camel route with a malicious server whose LIST response named a file outside the polled directory.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. The 4.14.x stream reached end of life and does not receive this fix; users on it should move to a supported releases stream. |
| Deserialization of Untrusted Data vulnerability in Apache Camel Spring Redis component.
This issue affects Apache Camel: from 2.11.0 before 4.18.5, from 4.19.0 before 4.22.1.
RedisConfiguration.getSerializer lazily built a bare JdkSerializationRedisSerializer whenever no serializer option was configured, and that instance was used for every read the component performs. Spring's implementation delegates through DeserializingConverter to DefaultDeserializer, which reads the bytes with a ConfigurableObjectInputStream and installs no java.io.ObjectInputFilter on the stream, so an arbitrary serialized class graph was materialised and its readObject method executed. RedisConsumer.setBody applied that serializer to the raw bytes of every message published to the subscribed channels, before the Exchange was constructed and therefore before any route logic could inspect the message, so an actor able to issue PUBLISH on a subscribed channel reached the deserialization sink directly. The same default serializer backed the RedisTemplate built by RedisConfiguration.createDefaultTemplate, so the producer read commands GET, HGET, HGETALL and HVALS deserialized whatever was stored in the Redis keyspace, and SpringRedisIdempotentRepository shared that template. Configuring a custom redisTemplate did not close the consumer path, because RedisConsumer.setBody reads getSerializer directly rather than the serializer attached to the template, so a deployment that had wired a String serializer into its own template remained exposed on the consumer side unless it also set the serializer option. The component never constructed a java.io.ObjectInputStream itself, which is why earlier passes over the Camel codebase for unfiltered Java deserialization did not reach it. The behaviour dates back to the introduction of the component, first released in 2.11.0, and was unchanged until this fix.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.1. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release. For deployments that cannot upgrade immediately, set the JVM-wide jdk.serialFilter system property, which the affected code path honours because it reads through a java.io.ObjectInputStream, for example -Djdk.serialFilter=!java.net.**;java.**;javax.**;org.apache.camel.**;!* ; or set the serializer endpoint option to a serializer that does not use Java serialization, such as StringRedisSerializer, noting that this must be set as the serializer option and not only on a custom redisTemplate. As defence in depth, require authentication on the Redis instance and restrict which clients may publish to the subscribed channels, and do not expose a Redis instance consumed by Camel to untrusted networks. |
| Path-confinement bypass during metadata backup deletion in Apache Kylin. Impact most to the kylin services that are directly exposed to public network, which is not common. In-house kylin deployments are mostly not impacted.
This issue affects Apache Kylin: from 4.0.0 through 5.0.4.
Users are recommended to upgrade to version 5.0.5, which fixes the issue. |
| Server-Side request forgery (SSRF) vulnerability in Apache Kylin. Impact most to the kylin job service that are directly exposed to public network, which is not common. In-house kylin deployments are mostly not impacted.
This issue affects Apache Kylin: from 4.0.0 through 5.0.4.
Users are recommended to upgrade to version 5.0.5, which fixes the issue. |
| Missing authorization on jdbc source config update in Apache Kylin. Impact most to the kylin services that are directly exposed to public network, which is not common. In-house kylin deployments are mostly not impacted.
This issue affects Apache Kylin: from 4.0.0 through 5.0.4.
Users are recommended to upgrade to version 5.0.5, which fixes the issue. |
| Missing authentication for in-house broadcast and polymorphic deserialization vulnerability in Apache Kylin. Impact most to the kylin services that are directly exposed to public network, which is not common. In-house kylin deployments are mostly not impacted.
This issue affects Apache Kylin: from 4.0.0 through 5.0.4.
Users are recommended to upgrade to version 5.0.5, which fixes the issue. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Apache Kylin. The impact is moderate if kylin service is in query only mode, which is the default and most common mode.
This issue affects Apache Kylin: from 4.0.0 through 5.0.4.
Users are recommended to upgrade to version 5.0.5, which fixes the issue. |
| Potential JDBC source configuration validation vulnerability in Apache Kylin. The impact is minor, unless the kylin backend services are open to public network.
This issue affects Apache Kylin: from 4.0.0 through 5.0.4.
Users are recommended to upgrade to version 5.0.5, which fixes the issue. |
| Exposure of Sensitive Information to an Unauthorized Actor during job manipulation in Apache Kylin. The impact is minor unless job services are exposed to public network, which is uncommon.
This issue affects Apache Kylin: from 4.0.0 through 5.0.4.
Users are recommended to upgrade to version 5.0.5, which fixes the issue. |
| Default startup profile miss security settings in Apache Kylin. Any deployment has security setting profile turned on does not impact.
This issue affects Apache Kylin: from 4.0.0 through 5.0.4.
Users are recommended to upgrade to version 5.0.5, which fixes the issue. |
| Allocation of resources without limits or throttling vulnerability in Apache Kylin. Given an attacker has got project admin permission, an cache API maybe used to cause computed-column resource exhaustion.
This issue affects Apache Kylin: from 4.0.0 through 5.0.4.
Users are recommended to upgrade to version 5.0.5, which fixes the issue. |
| Improper Neutralization of Special Elements Used in a Template Engine and Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Camel HTTP, Netty HTTP, Undertow and Vert.x HTTP components.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
The Camel HTTP producer families let an inbound message override the endpoint URI through the CamelHttpUri and CamelRestHttpUri headers, and then passed that message-supplied string through CamelContext.resolvePropertyPlaceholders() before using it. Property-placeholder resolution is a configuration-resolution facility, not a URI-parsing step: it reaches operating-system environment variables, JVM system properties, every PropertiesFunction registered on the classpath - including the secret functions - and, through camel-bean, the invocation of a no-argument method on any bean in the registry. Applying it to Exchange content therefore turned a URI string into a configuration- and bean-evaluation context. A route author opted into none of this: a plain static to("http://backend/api") was sufficient. Seven call sites were affected: HttpHelper.createURL and HttpHelper.createMethod in camel-http-common, HttpMethodHelper.createMethod in camel-http, VertxHttpHelper.resolveHttpURI in camel-vertx-http, UndertowHelper.createURL and UndertowHelper.createMethod in camel-undertow, and NettyHttpHelper.createURL in camel-netty-http. The bridgeEndpoint option did not bound the exposure: it suppresses the CamelHttpUri override in the createURL family but not in the createMethod family, so a route using the documented bridging configuration still resolved placeholders taken from the header, and CamelRestHttpUri was consumed before any bridgeEndpoint check in all four components. Only camel-http offered an opt-out, skipControlHeaders, which defaults to false. Reaching the headers did not always require header injection, because several Camel HTTP consumers populate CamelHttpUri from the request line themselves as a documented reverse-proxy feature. An unresolvable placeholder additionally produced a RuntimeExchangeException whose message echoed the URI, which distinguishes a set from an unset configuration key even where no outbound request is made. The behaviour predates the 4.x line. This advisory continues the alignment CAMEL-24282 applied to the toD and enrich dynamic-URI EIPs in 4.22.0, extending the same build-time-resolution contract to the HTTP producer components.
Users should upgrade to version 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x releases stream should upgrade to 4.18.5. The 4.14.x releases stream and earlier reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release. For deployments that cannot upgrade immediately, strip the override headers at the trust boundary before the producer with removeHeader("CamelHttpUri") and removeHeader("CamelRestHttpUri"), or set skipControlHeaders=true on camel-http endpoints, which is the only component offering that option. Note that bridgeEndpoint=true is not a workaround: it suppresses the header override when the outbound URL is built but not when the header is re-parsed for the query string. Percent-encoding the placeholder delimiters is likewise not a mitigation for camel-netty-http, whose binding decodes the request path before the value reaches the header, so proxy or WAF rules written against the raw delimiters do not help there. As defence in depth, ensure consumers exposed to untrusted senders apply a strict inbound HeaderFilterStrategy over the Camel namespace, and resolve secrets through a vault rather than through environment variables or system properties that a placeholder can name. |
| Improper Validation of Integrity Check Value vulnerability in Apache Camel Crypto PGP component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
unmarshal() verified the modification detection code only when the message was an OpenPGP symmetrically encrypted integrity protected data packet. The older symmetrically encrypted data packet carries no such code, and OpenPGP's CFB mode is malleable without one, so a message using that packet skipped the check altogether. The packet type is chosen by whoever produced the message, which left the sender - or anyone able to rewrite the message in transit - deciding whether the integrity check applied at all. The existing integrity option governs marshalling only and had no decrypt-side counterpart, so a deployment could not require integrity protection on the messages it accepted.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. A requireIntegrityProtection option, defaulting to true, now rejects a message that is not integrity protected. Note that signatureVerificationOption still defaults to optional, so a message carrying no signature is accepted; the two options together are what give a decrypted message authenticity and not only confidentiality. For deployments that cannot upgrade immediately, reject messages that do not use the integrity protected packet before they reach the data format. Routes that must interoperate with a sender still emitting the legacy packet should set requireIntegrityProtection=false after upgrading, and treat the decrypted content as unauthenticated. |
| Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Camel HTTP component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
Two paths handed credentials to a redirect target, which is a host chosen by the remote server rather than by the route, once followRedirects=true. OAuth2ClientConfigurer registers its interceptor with addRequestInterceptorFirst, and HttpClient runs protocol-level request interceptors inside ProtocolExec, which sits below RedirectExec in the exec chain; the interceptor therefore ran again for every redirect hop and re-attached Authorization: Bearer to whatever host the Location header named. Separately, credentials were registered against an AuthScope matching any host, so basic and digest credentials were presented to a redirect target as well. A remote endpoint - or anyone who can influence its responses - could therefore collect the bearer token or the configured credentials simply by answering with a redirect to a host it controls.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Credentials are now sent only to the authority the endpoint was configured with, and are not re-attached when a redirect crosses to another host. For deployments that cannot upgrade immediately, set followRedirects=false on endpoints that carry credentials, and handle any redirect explicitly in the route so that the destination is chosen by the route rather than by the remote server. |
| Permissive Cross-domain Policy with Untrusted Domains vulnerability in Apache Camel Platform HTTP Vertx component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
createCorsHandler() set Access-Control-Allow-Credentials: true outside the origin check, so the header went out on every response to a request carrying an Origin header, including responses to origins the handler had just decided not to allow. When camel.server.cors.origins is unset, the handler treats every origin as allowed and echoes the caller's own Origin back as Access-Control-Allow-Origin. Together those produce the credentialed any-origin configuration that the fetch specification refuses to express as a literal wildcard, which is precisely why reflecting the origin is the usual way around that rule. A page on any origin could therefore make credentialed cross-origin requests to the Camel endpoint and read the responses.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Access-Control-Allow-Credentials is now sent only when the request origin matched an origin the operator actually configured. With no origin list the origin is still reflected, as before, but credentials are not granted, and Vary: Origin is now set whenever the origin is reflected so that a shared cache cannot serve one origin's response to another. For deployments that cannot upgrade immediately, set camel.server.cors.origins to the explicit list of origins that need access rather than leaving it unset. |
