| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: rpl: reserve mac_len headroom when recompressed SRH grows
ipv6_rpl_srh_rcv() decompresses an RFC 6554 Source Routing Header, swaps
the next segment into ipv6_hdr->daddr, recompresses, then pulls the old
header and pushes the new one plus the IPv6 header back. The
recompressed header can be larger than the received one when the swap
reduces the common-prefix length the segments share with daddr (CmprI=0,
CmprE>0, seg[0][0] != daddr[0] gives the maximum +8 bytes).
pskb_expand_head() was gated on segments_left == 0, so on earlier
segments the push consumed unchecked headroom. Once skb_push() leaves
fewer than skb->mac_len bytes in front of data,
skb_mac_header_rebuild()'s call to:
skb_set_mac_header(skb, -skb->mac_len);
will store (data - head) - mac_len into the u16 mac_header field, which
wraps to ~65530, and the following memmove() writes mac_len bytes ~64KiB
past skb->head.
A single AF_INET6/SOCK_RAW/IPV6_HDRINCL packet over lo with a two
segment type-3 SRH (CmprI=0, CmprE=15) reaches headroom 8 after one
pass; KASAN reports a 14-byte OOB write in ipv6_rthdr_rcv.
Fix this by expanding the head whenever the remaining room is less than
the push size plus mac_len, and request that much extra so the rebuilt
MAC header fits afterwards. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_h323: fix OOB read in decode_choice()
In decode_choice(), the boundary check before get_len() uses the
variable `len`, which is still 0 from its initialization at the top of
the function:
unsigned int type, ext, len = 0;
...
if (ext || (son->attr & OPEN)) {
BYTE_ALIGN(bs);
if (nf_h323_error_boundary(bs, len, 0)) /* len is 0 here */
return H323_ERROR_BOUND;
len = get_len(bs); /* OOB read */
When the bitstream is exactly consumed (bs->cur == bs->end), the check
nf_h323_error_boundary(bs, 0, 0) evaluates to (bs->cur + 0 > bs->end),
which is false. The subsequent get_len() call then dereferences
*bs->cur++, reading 1 byte past the end of the buffer. If that byte
has bit 7 set, get_len() reads a second byte as well.
This can be triggered remotely by sending a crafted Q.931 SETUP message
with a User-User Information Element containing exactly 2 bytes of
PER-encoded data ({0x08, 0x00}) to port 1720 through a firewall with
the nf_conntrack_h323 helper active. The decoder fully consumes the
PER buffer before reaching this code path, resulting in a 1-2 byte
heap-buffer-overflow read confirmed by AddressSanitizer.
Fix this by checking for 2 bytes (the maximum that get_len() may read)
instead of the uninitialized `len`. This matches the pattern used at
every other get_len() call site in the same file, where the caller
checks for 2 bytes of available data before calling get_len(). |
| In the Linux kernel, the following vulnerability has been resolved:
vt: discard stale unicode buffer on alt screen exit after resize
When enter_alt_screen() saves vc_uni_lines into vc_saved_uni_lines and
sets vc_uni_lines to NULL, a subsequent console resize via vc_do_resize()
skips reallocating the unicode buffer because vc_uni_lines is NULL.
However, vc_saved_uni_lines still points to the old buffer allocated for
the original dimensions.
When leave_alt_screen() later restores vc_saved_uni_lines, the buffer
dimensions no longer match vc_rows/vc_cols. Any operation that iterates
over the unicode buffer using the current dimensions (e.g. csi_J clearing
the screen) will access memory out of bounds, causing a kernel oops:
BUG: unable to handle page fault for address: 0x0000002000000020
RIP: 0010:csi_J+0x133/0x2d0
The faulting address 0x0000002000000020 is two adjacent u32 space
characters (0x20) interpreted as a pointer, read from the row data area
past the end of the 25-entry pointer array in a buffer allocated for
80x25 but accessed with 240x67 dimensions.
Fix this by checking whether the console dimensions changed while in the
alternate screen. If they did, free the stale saved buffer instead of
restoring it. The unicode screen will be lazily rebuilt via
vc_uniscr_check() when next needed. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: replace hardcoded hdr2_len with offsetof() in smb2_calc_max_out_buf_len()
After this commit (e2b76ab8b5c9 "ksmbd: add support for read compound"),
response buffer management was changed to use dynamic iov array.
In the new design, smb2_calc_max_out_buf_len() expects the second
argument (hdr2_len) to be the offset of ->Buffer field in the
response structure, not a hardcoded magic number.
Fix the remaining call sites to use the correct offsetof() value. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc4-topology: Correct the allocation size for bytes controls
The size of the data behind of scontrol->ipc_control_data for bytes
controls is:
[1] sizeof(struct sof_ipc4_control_data) + // kernel only struct
[2] sizeof(struct sof_abi_hdr)) + payload
The max_size specifies the size of [2] and it is coming from topology.
Change the function to take this into account and allocate adequate amount
of memory behind scontrol->ipc_control_data.
With the change we will allocate [1] amount more memory to be able to hold
the full size of data. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: account for fraggap on the paged allocation path
In __ip6_append_data(), when the paged-allocation branch is taken
(MSG_MORE / NETIF_F_SG / large fraglen), alloclen and pagedlen are
computed as
alloclen = fragheaderlen + transhdrlen;
pagedlen = datalen - transhdrlen;
datalen already includes fraggap (datalen = length + fraggap). When
fraggap is non-zero, this is not the first skb and transhdrlen is zero.
The fraggap bytes carried over from the previous skb are copied just past
the fragment headers in the new skb's linear area. The linear area is
therefore undersized by fraggap bytes while pagedlen is overstated by the
same amount, and the copy writes past skb->end into the trailing
skb_shared_info.
An unprivileged user can trigger this via a UDPv6 socket using
MSG_MORE together with MSG_SPLICE_PAGES.
The bad accounting was introduced by commit 773ba4fe9104 ("ipv6:
avoid partial copy for zc"). Before commit ce650a166335 ("udp6: Fix
__ip6_append_data()'s handling of MSG_SPLICE_PAGES"), the negative
copy value caused -EINVAL to be returned. That later commit allowed
MSG_SPLICE_PAGES to proceed in this case, making the corruption
triggerable.
The non-paged branch sets alloclen to fraglen, which already accounts
for fraggap because datalen does. Bring the paged branch in line by
adding fraggap to alloclen and subtracting it from pagedlen.
After this adjustment, copy no longer collapses to -fraggap on the
paged path, so remove the stale comment describing that old arithmetic.
Since a negative copy is no longer expected for a valid MSG_SPLICE_PAGES
case, remove the MSG_SPLICE_PAGES exception from the negative copy check. |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: cap upcall PID array size and pre-size vport replies
The vport netlink reply helpers allocate a fixed-size skb with
nlmsg_new(NLMSG_DEFAULT_SIZE, ...) but serialize the full upcall PID
array via ovs_vport_get_upcall_portids(). Since
ovs_vport_set_upcall_portids() accepts any non-zero multiple of
sizeof(u32) with no upper bound, a CAP_NET_ADMIN user can install a PID
array large enough to overflow the reply buffer, causing nla_put() to
fail with -EMSGSIZE and hitting BUG_ON(err < 0). On systems with
unprivileged user namespaces enabled (e.g., Ubuntu default), this is
reachable via unshare -Urn since OVS vport mutation operations use
GENL_UNS_ADMIN_PERM.
kernel BUG at net/openvswitch/datapath.c:2414!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 1 UID: 0 PID: 65 Comm: poc Not tainted 7.0.0-rc7-00195-geb216e422044 #1
RIP: 0010:ovs_vport_cmd_set+0x34c/0x400
Call Trace:
<TASK>
genl_family_rcv_msg_doit (net/netlink/genetlink.c:1116)
genl_rcv_msg (net/netlink/genetlink.c:1194)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
genl_rcv (net/netlink/genetlink.c:1219)
netlink_unicast (net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
__sys_sendto (net/socket.c:2206)
__x64_sys_sendto (net/socket.c:2209)
do_syscall_64 (arch/x86/entry/syscall_64.c:63)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
Kernel panic - not syncing: Fatal exception
Reject attempts to set more PIDs than nr_cpu_ids in
ovs_vport_set_upcall_portids(), and pre-compute the worst-case reply
size in ovs_vport_cmd_msg_size() based on that bound, similar to the
existing ovs_dp_cmd_msg_size(). nr_cpu_ids matches the cap already
used by the per-CPU dispatch configuration on the datapath side
(ovs_dp_cmd_fill_info() serialises at most nr_cpu_ids PIDs), so the
two sides stay consistent. |
| Libgcrypt before 1.12.2 sometimes allows a heap-based buffer overflow and denial of service via crafted ECDH ciphertext to gcry_pk_decrypt. |
| In the Linux kernel, the following vulnerability has been resolved:
af_key: validate families in pfkey_send_migrate()
syzbot was able to trigger a crash in skb_put() [1]
Issue is that pfkey_send_migrate() does not check old/new families,
and that set_ipsecrequest() @family argument was truncated,
thus possibly overfilling the skb.
Validate families early, do not wait set_ipsecrequest().
[1]
skbuff: skb_over_panic: text:ffffffff8a752120 len:392 put:16 head:ffff88802a4ad040 data:ffff88802a4ad040 tail:0x188 end:0x180 dev:<NULL>
kernel BUG at net/core/skbuff.c:214 !
Call Trace:
<TASK>
skb_over_panic net/core/skbuff.c:219 [inline]
skb_put+0x159/0x210 net/core/skbuff.c:2655
skb_put_zero include/linux/skbuff.h:2788 [inline]
set_ipsecrequest net/key/af_key.c:3532 [inline]
pfkey_send_migrate+0x1270/0x2e50 net/key/af_key.c:3636
km_migrate+0x155/0x260 net/xfrm/xfrm_state.c:2848
xfrm_migrate+0x2140/0x2450 net/xfrm/xfrm_policy.c:4705
xfrm_do_migrate+0x8ff/0xaa0 net/xfrm/xfrm_user.c:3150 |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: avoid online resizing failures due to oversized flex bg
When we online resize an ext4 filesystem with a oversized flexbg_size,
mkfs.ext4 -F -G 67108864 $dev -b 4096 100M
mount $dev $dir
resize2fs $dev 16G
the following WARN_ON is triggered:
==================================================================
WARNING: CPU: 0 PID: 427 at mm/page_alloc.c:4402 __alloc_pages+0x411/0x550
Modules linked in: sg(E)
CPU: 0 PID: 427 Comm: resize2fs Tainted: G E 6.6.0-rc5+ #314
RIP: 0010:__alloc_pages+0x411/0x550
Call Trace:
<TASK>
__kmalloc_large_node+0xa2/0x200
__kmalloc+0x16e/0x290
ext4_resize_fs+0x481/0xd80
__ext4_ioctl+0x1616/0x1d90
ext4_ioctl+0x12/0x20
__x64_sys_ioctl+0xf0/0x150
do_syscall_64+0x3b/0x90
==================================================================
This is because flexbg_size is too large and the size of the new_group_data
array to be allocated exceeds MAX_ORDER. Currently, the minimum value of
MAX_ORDER is 8, the minimum value of PAGE_SIZE is 4096, the corresponding
maximum number of groups that can be allocated is:
(PAGE_SIZE << MAX_ORDER) / sizeof(struct ext4_new_group_data) ≈ 21845
And the value that is down-aligned to the power of 2 is 16384. Therefore,
this value is defined as MAX_RESIZE_BG, and the number of groups added
each time does not exceed this value during resizing, and is added multiple
times to complete the online resizing. The difference is that the metadata
in a flex_bg may be more dispersed. |
| An issue was discovered in drivers/net/ethernet/intel/igb/igb_main.c in the IGB driver in the Linux kernel before 6.5.3. A buffer size may not be adequate for frames larger than the MTU. |
| An integer overflow in curl's URL API results in a buffer overflow in libcurl 7.62.0 to and including 7.64.1. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/snapshot: fix dumping of the unaligned regions
The snapshotting code internally aligns data segment to 16 bytes. This
works fine for DPU code (where most of the regions are aligned), but
fails for snapshotting of the DSI data (because DSI data region is
shifted by 4 bytes). Fix the code by removing length alignment and by
accurately printing last registers in the region. While reworking the
code also fix the 16x memory overallocation in
msm_disp_state_dump_regs().
Patchwork: https://patchwork.freedesktop.org/patch/725449/ |
| A heap-buffer-overflow vulnerability exists in the APNG (Animated PNG) file loader of GIMP. This flaw occurs when the `fcTL` width exceeds the `IHDR` width, leading to pixel data being written past the end of a heap allocation. Additionally, a heap-based buffer overflow exists in the DDS plug-in due to a BPP mismatch in the `load_layer()` function. Both vulnerabilities can be triggered by opening a specially crafted image file, potentially leading to code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: add HE 6 GHz capability in the scan elems len
The HE 6 GHz Band Capability element is in the probe request for
every band if 6 GHz is supported, so add the size to scan_ies_len.
Otherwise, building probe request elements can fail, triggering the
WARN_ON in __ieee80211_start_scan(). |
| In order to decrypt SM2 encrypted data an application is expected to call the API function EVP_PKEY_decrypt(). Typically an application will call this function twice. The first time, on entry, the "out" parameter can be NULL and, on exit, the "outlen" parameter is populated with the buffer size required to hold the decrypted plaintext. The application can then allocate a sufficiently sized buffer and call EVP_PKEY_decrypt() again, but this time passing a non-NULL value for the "out" parameter. A bug in the implementation of the SM2 decryption code means that the calculation of the buffer size required to hold the plaintext returned by the first call to EVP_PKEY_decrypt() can be smaller than the actual size required by the second call. This can lead to a buffer overflow when EVP_PKEY_decrypt() is called by the application a second time with a buffer that is too small. A malicious attacker who is able present SM2 content for decryption to an application could cause attacker chosen data to overflow the buffer by up to a maximum of 62 bytes altering the contents of other data held after the buffer, possibly changing application behaviour or causing the application to crash. The location of the buffer is application dependent but is typically heap allocated. Fixed in OpenSSL 1.1.1l (Affected 1.1.1-1.1.1k). |
| Imager versions before 1.037 for Perl overflow a heap buffer fetching float samples from a paletted image in i_gsampf_fp.
For a paletted image, getsamples() with type "float" allocates a buffer of one sample per pixel and fetches every requested channel of each pixel into it. Requesting more than one channel writes past its end.
An attacker-supplied image controls the overflowing bytes through its palette. |
| An incorrect buffer size calculation vulnerability exists in tinyexpr commit 4a7456e in new_expr(). For arity-0 expression nodes, including constants, variables, and zero-argument functions, the function allocates less memory than sizeof(te_expr) but treats the returned allocation as a complete te_expr object. This results in undefined behavior and can cause deterministic process termination in UBSan-instrumented builds. |
| Zebra before 6.1.0 contains an incorrect calculation vulnerability in its ZIP-317 block template selector that omits header and transaction-count size from the block budget. Attackers can place valid selectable transactions in a victim miner's mempool to shape templates into oversized blocks, causing rejection and wasted proof-of-work. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: Reserve extra CQ slot for the fence completion CQE
The RX completion queue is sized to hold exactly one CQE per posted RX WQE.
MANA_FENCE_RQ makes hardware post an additional CQE_RX_OBJECT_FENCE after
the packet CQEs. The current sizing reserves no extra slot for it and in
rare cases, CQ has no guaranteed slot for the fence CQE when it is full of
packet CQEs. This can lead to dropping the fence completion while the
driver waits holding RTNL lock throughout the timeout duration.
Reserve one extra CQE slot for CQE_RX_OBJECT_FENCE. mana_gd_alloc_memory()
requires queue_size to be a power-of-two and at least MANA_PAGE_SIZE;
the reservation pushes cq_size past a power-of-two, so round up the CQ size
in mana_create_rxq(). |
