Export limit exceeded: 417764 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (29851 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-15044 | 1 Redhat | 1 Openshift Ai | 2026-10-26 | 6.3 Medium |
| A flaw was found in the TrustyAI Service Operator. When deploying services like gorch or NemoGuardrails, if a specific security setting is not enabled, these services can expose their communication channels without requiring users to prove their identity. This allows any other program within the cluster to access the AI guardrails and orchestrator without proper authorization. An attacker could exploit this to gain unauthorized access to sensitive information and potentially make limited changes to the AI models. | ||||
| CVE-2013-10077 | 1 Octoprint | 1 Octoprint | 2026-10-26 | 5.3 Medium |
| A weakness has been identified in OctoPrint 1.0.0. This impacts the function getSettings of the file src/octoprint/server/ajax/settings.py of the component API Key Handler. This manipulation causes information disclosure. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks. Upgrading to version 1.1.0-rc1 will fix this issue. Patch name: eccc9d6fbde0c46cdd6e255fd5ce9a30077ba954. You should upgrade the affected component. Affected is a 2013 release where access control was not yet implemented and the endpoint was part of first-run setup). The API key has been admin-gated since 1.2.0 and GET /api/settings is protected by Permissions.SETTINGS_READ plus reauthentication in all current releases. | ||||
| CVE-2026-110870 | 1 Nodemailer | 1 Nodemailer | 2026-10-26 | 5.3 Medium |
| Nodemailer from 3.0.0 before 10.0.13 contains an improper input validation vulnerability in its address parser that fails to strip RFC 5322 comments inside angle-bracket addresses. Attackers can supply recipients like a display name with a parenthesized comment in the domain, so illegal characters reach envelope.to and RCPT TO, causing rejected delivery or parser interpretation conflicts that bypass domain allow-lists. | ||||
| CVE-2026-105895 | 1 Adobe | 2 Adobe Experience Manager, Experience Manager | 2026-10-26 | 9.9 Critical |
| Adobe Experience Manager is affected by an Improper Input Validation vulnerability that could result in arbitrary code execution in the context of the current user, potentially gaining elevated access or control over the victim's account or session. Exploitation of this issue does not require user interaction. Scope is changed. | ||||
| CVE-2026-82943 | 2026-10-26 | 6.5 Medium | ||
| SOEM version 2.0.0 and earlier contains vulnerabilities where a malicious device can send messages that cause the master to read data from memory locations beyond the intended buffer. The software uses length values from device responses without validating them against actual buffer sizes. An attacker can exploit this to extract up to 64KB of data from the master's memory. | ||||
| CVE-2026-106626 | 1 Adobe | 3 Adobe Experience Manager, Experience Manager, Experience Manager Cloud Service | 2026-10-26 | 9.1 Critical |
| Adobe Experience Manager is affected by an Improper Input Validation vulnerability that could result in arbitrary code execution in the context of the current user. An attacker with high privileges could exploit this vulnerability to execute arbitrary code. Exploitation of this issue does not require user interaction. Scope is changed. | ||||
| CVE-2026-116284 | 1 Kameleo | 1 Kameleo | 2026-10-26 | 4.3 Medium |
| A security vulnerability has been detected in Kameleo up to 5.3.1. This vulnerability affects unknown code of the file /general/user-info of the component Local API. Such manipulation leads to information disclosure. The attack may be performed from remote. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-116283 | 1 Kameleo | 1 Kameleo | 2026-10-26 | 4.3 Medium |
| A weakness has been identified in Kameleo up to 5.0.1.26. This affects an unknown part of the file /profiles of the component Local API. This manipulation causes information disclosure. The attack is possible to be carried out remotely. Upgrading to version 5.2.0 is able to mitigate this issue. Upgrading the affected component is advised. | ||||
| CVE-2026-116281 | 1 Kameleo | 1 Kameleo | 2026-10-26 | 3.3 Low |
| A vulnerability was identified in Kameleo up to 5.0.1.26. Affected by this vulnerability is the function ListProfiles of the file client-engine-application/t.cs of the component Profile Controller. The manipulation leads to information disclosure. The attack can only be performed from a local environment. Upgrading to version 5.2.0 addresses this issue. Upgrading the affected component is recommended. | ||||
| CVE-2026-115594 | 2026-10-26 | 6.5 Medium | ||
| Insertion of Sensitive Information Into Sent Data vulnerability in David Lingren Media LIbrary Assistant media-library-assistant allows Retrieve Embedded Sensitive Data.This issue affects Media LIbrary Assistant: from n/a through 3.42. | ||||
| CVE-2026-111976 | 1 Wordpress-extensions | 1 Givewp | 2026-10-26 | 5.3 Medium |
| The GiveWP WordPress plugin before 4.19.0.1 does not perform any status or capability check when rendering a donation form on a public front-end route, allowing unauthenticated visitors to view the content and settings of unpublished (draft, pending, private and scheduled) donation forms that WordPress core otherwise keeps non-public. | ||||
| CVE-2026-101259 | 1 Apache | 2 Apache Camel, Camel | 2026-10-26 | 5.3 Medium |
| Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel CoAP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.2. When the CoAP consumer could not build its response once the route had completed, CamelCoapResource caught the resulting exception and sent its message back to the CoAP client as the payload of a 5.00 Internal Server Error response. The typical case is a type conversion failure: the consumer converts the final message body to the byte[] payload, and the CamelCoapMaxAge and CamelCoapETag headers to their types, after the route has returned, and therefore outside the route's error handler. On the affected releases the message of such a failure names the class of the value being converted, carries the value's string form, and ends with the class name and message of the underlying cause, so a remote CoAP client could read internal detail about the deployment: class and package names, the string form of the value, such as the path of a file body, and whatever the cause carries, which in practice can include paths, host names and connection detail of a backend. The consumer had no option to suppress this, unlike the HTTP consumers, which offer a muteException option for that purpose. The exception raised by a failing route was not sent: the consumer did not check whether the exchange had failed, and answered a route failure with 2.05 Content and whatever body the message held at that point. Reaching the disclosure therefore requires a route whose completed response a remote client can make unconvertible, which depends on how the route is written. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier, and the 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines, reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. The upgrade is enough on its own: the new muteException consumer option defaults to true on all three fixed release lines, so the error response carries no payload without any configuration change. For deployments that cannot upgrade immediately, make sure the response can always be built once the route has completed: convert the body to byte[] or String as the last step of each route that consumes from a coap endpoint, for example with convertBodyTo, give the CamelCoapMaxAge and CamelCoapETag headers only values of their own types, and add an onException handler that marks the failure as handled and sets the response body explicitly, so that a conversion failure is raised and replaced inside the route rather than in the consumer. | ||||
| CVE-2026-111974 | 1 Wordpress-extensions | 1 Givewp | 2026-10-26 | 5.3 Medium |
| The GiveWP WordPress plugin before 4.19.0.1 does not restrict the currency of a donation to the one the site or form accepts, while comparing its amount limits as bare numbers, allowing unauthenticated users to make donations below a form's configured minimum or fixed amount. | ||||
| CVE-2026-116372 | 1 Misp | 1 Misp-guard | 2026-10-26 | N/A |
| MISP mispguard is a security filtering proxy that inspects and blocks MISP feed responses based on configured rules. The process_feed_response method in src/mispguard.py was responsible for evaluating feed responses before they reached the MISP instance. The original logic only explicitly handled the case where the HTTP status code was not 200 by passing the response through without filtering, on the assumption that non-200 responses would not carry ingestible event data. However, HTTP 2xx status codes other than 200 (such as 201 Created, 203 Non-Authoritative Information, and 206 Partial Content) were also passed through unfiltered. Because MISP may still ingest content from these responses, a malicious or compromised feed host could return a 203 or 206 status code with arbitrary content, effectively bypassing all of mispguard's filtering rules. This allowed unfiltered or malicious feed data to be ingested into the MISP instance, undermining the security controls that mispguard is designed to enforce. The vulnerability requires the attacker to control or compromise a feed endpoint configured in the MISP instance. No authentication or user interaction is required beyond the feed polling mechanism already in place. | ||||
| CVE-2026-116122 | 1 Nocodb | 1 Nocodb | 2026-10-26 | 3.7 Low |
| A security flaw has been discovered in NocoDB up to 2026.07.0. Impacted is the function AuthService.validateUser of the component Sign-in Endpoint. Performing a manipulation of the argument salt results in information disclosure. It is possible to initiate the attack remotely. The attack's complexity is rated as high. The exploitability is considered difficult. The vendor deleted the GitHub issue for this vulnerability without any explanation. Afterwards the vendor was contacted early about this disclosure via email but did not respond in any way. | ||||
| CVE-2026-72711 | 1 Leanprover | 1 Lean4 | 2026-10-26 | 6.3 Medium |
| The Lean 4 kernel does not check that the body of an opaque declaration is closed. environment::add_opaque omits the check_no_metavar_no_fvar call that the definition and theorem paths perform, so a value containing a free variable that is absent from the local context is not rejected outright. A metaprogram can first cause the kernel to create a temporary local of type False and record its type in the type checker's inference cache, then restore the local context while that cache entry persists on the same type checker instance, and finally submit an opaque declaration whose value is the now-unbound variable. The cache lookup answers before the branch that would test membership of the local context, so the kernel infers the cached type and admits an opaque constant of type False, from which any proposition follows. The declaration is accepted through the ordinary checked path at maximum kernel checking, without sorry, unsafeCast, debug.skipKernelTC, addDeclWithoutChecking, foreign code or a modified .olean file, and the result carries no axioms. Fixed in 4.32.2 by adding the missing closure check. | ||||
| CVE-2026-107079 | 2026-10-26 | N/A | ||
| An issue in Systrome Validation & Certification 1.0 allows an attacker to cause a denial of service via the t URL parameter in the qrcode_auth.html component | ||||
| CVE-2026-34472 | 1 Zte | 2 Zxhn H188a, Zxhn H188a Firmware | 2026-10-25 | 7.1 High |
| Unauthenticated credential disclosure in the wizard interface in ZTE ZXHN H188A V6.0.10P2_TE and V6.0.10P3N3_TE allows unauthenticated attackers on the local network to retrieve sensitive credentials from the router's web management interface, including the default administrator password, WLAN PSK, and PPPoE credentials. In some observed cases, configuration changes may also be performed without authentication. | ||||
| CVE-2026-6973 | 1 Ivanti | 1 Endpoint Manager Mobile | 2026-10-25 | 7.2 High |
| An Improper Input Validation in Ivanti EPMM before versions 12.6.1.1, 12.7.0.1, and 12.8.0.1 allows a remotely authenticated user with administrative access to achieve remote code execution. | ||||
| CVE-2026-116172 | 2 Vllm, Vllm-project | 2 Vllm, Vllm | 2026-10-25 | 5.9 Medium |
| vLLM from 0.22.0 before 0.24.0 contains an improper input validation vulnerability in the Rust gRPC converter that allows remote attackers to bypass max_logprobs limits via CandidateTokens.top_n. Attackers can send Generate or GenerateStream requests with oversized or integer-wrapping top_n values to trigger torch.topk failures that terminate EngineCore. | ||||