| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An issue has been found in JasPer 2.0.14. There is a memory leak in jas_malloc.c when called from jpc_unk_getparms in jpc_cs.c. |
| A flaw was found in Netty's HttpServerCodec. A remote, unauthenticated attacker can exploit this vulnerability by pipelining HTTP/1.1 requests on a single connection and withholding reads. This action causes the methodOverflowQueue to grow without limit, leading to unbounded heap memory consumption and a denial of service due to memory exhaustion. |
| A flaw was found in Netty. SpdySessionHandler accepts an unlimited number of concurrent remote-initiated streams because localConcurrentStreams defaults to Integer.MAX_VALUE and the handler provides no API to change it. A remote peer can open a SPDY connection and send a large number of SYN_STREAM frames with FLAG_FIN=0, causing unbounded heap and direct memory allocation that can lead to JVM OutOfMemoryError and a denial of service. |
| A flaw has been found in Wavlink WL-WN592AX6 250422. This issue affects the function system of the component wmapd Daemon. Executing a manipulation can lead to os command injection. It is possible to launch the attack remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure. |
| A vulnerability was found in Edimax BR-6208AC 1.32. This vulnerability affects unknown code of the file /goform/formAccept. Performing a manipulation of the argument submit-url results in command injection. The attack is possible to be carried out remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer. |
| A vulnerability was found in Linksys E1700 1.0.0.4.003. This affects the function setLinksysIpv6 of the file /goform/setLinksysIpv6. The manipulation of the argument _6rd_prefix/_6rd_prefix_len results in os command injection. The attack can be launched remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was detected in TRENDnet TEW-751DR, TEW-752DRU and TEW733GR 1.03B01/1.03B03. Affected is the function fwrite of the file pigwidgeon.cgi of the component Web Management Backend. The manipulation of the argument service results in os command injection. It is possible to launch the attack remotely. The exploit is now public and may be used. The vendor confirms: "As this router was EOL'd in 2011, we have no way of testing if such vulnerability exists. We will notify our customers of a potential vulnerability on this product." This vulnerability only affects products that are no longer supported by the maintainer. |
| Uncontrolled Recursion vulnerability in Protobuf.JSON.Decode in elixir-protobuf protobuf allows an unauthenticated remote attacker to crash the decoding process via a deeply nested JSON document. Any application that decodes attacker-supplied JSON with Protobuf.JSON.decode/3, Protobuf.JSON.decode!/3, or Protobuf.JSON.from_decoded/3 into a schema that contains a self-referential or cyclic message type is affected.
In lib/protobuf/json/decode.ex, the embedded-message clause of decode_singular/3 recurses into internal_from_json_data/3 once per nesting level without incrementing or checking the decoder's depth counter. The depth guard increase_depth_and_maybe_throw/1 covers only the Google.Protobuf.ListValue and Google.Protobuf.Struct clauses, so the recursion_limit option has no effect on user-defined message types. Each nesting level allocates a stack frame and heap objects, and a sufficiently deep document exhausts the memory of the decoding process. Confidentiality and integrity are not affected.
This issue affects protobuf: from 0.8.0 before 0.17.1. |
| A vulnerability was determined in D-Link DIR-868L 2.01b05. This impacts the function system of the file /htdocs/cgibin of the component HNAP CGI Handler. Executing a manipulation of the argument SOAPACTION can lead to os command injection. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. |
| OWASP Coraza WAF is a golang modsecurity compatible web application firewall library. From 3.0.0 until 3.8.1, Coraza silently drops arguments after SecArgumentsLimit in internal/corazawaf/transaction.go, while internal/bodyprocessors/urlencoded.go writes ARGS_POST without enforcing the cap. The flaw is triggered when an unauthenticated attacker sends more arguments than SecArgumentsLimit or supplies bodies that expand beyond the configured argument and flattening budgets. An unauthenticated attacker can flood requests with arguments so excess values are silently omitted from ARGS, ARGS_GET, ARGS_NAMES, ARGS_GET_NAMES, ARGS_POST, or ARGS_PATH before security rules inspect them; affected urlencoded and JSON processing can also consume excessive memory. The omission can bypass WAF rules protecting the downstream application, and unbounded or amplified argument processing can cause memory consumption and service degradation. This issue is fixed in version 3.8.1. |
| A vulnerability was identified in Edimax BR-6208AC 1.32. Impacted is an unknown function of the file /goform/formWlanMP. The manipulation of the argument readE2P leads to command injection. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer. |
| In the Linux kernel, the following vulnerability has been resolved:
iomap: release pages on atomic dio size mismatch
If bio_iov_iter_get_pages() or the bounce helper succeeds but builds a
short bio, the REQ_ATOMIC size check rejects it before submission. The
old error path only dropped the bio reference, leaving any pages already
attached to the bio unreleased.
Release or unbounce the pages before falling through to out_put_bio on
this error path.
This bug was reported by sashiko:
https://sashiko.dev/#/patchset/20260608073134.95964-1-changfengnan%40bytedance.com |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: fix dma_vecs leak on p2p memory
We don't unmap P2P memory, so we don't need to track it. The dma_vec
allocation was getting leaked on the completion. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: fix dma mapping leak on data setup error
We're leaking the initial DMA mapping during iteration if we fail to
allocate the tracking descriptor for both PRP and SGL. Unmap the
iterator directly; we can't use the existing unmap helper because it
depends on the tracking descriptor being successfully allocated, so a
new one for an in-use iterator is provided.
The mappings were also leaking when the driver detects an invalid
bio_vec when mapping PRPs, so fix that too. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: button: Fix ACPI GPE handler leak during removal
Commit a7e23ec17fee ("ACPI: button: Install notifier for system events
as well") changed the ACPI notify handler type for ACPI buttons to
ACPI_ALL_NOTIFY, but it forgot to update acpi_button_remove() to reflect
that change. This leads to leaking the notify handler past driver
removal, which may cause a kernel crash to occur if ACPI notify on
the given device is triggered after removing the driver, and causes a
subsequent probe of the given device with the same driver to fail.
Address this by updating the acpi_remove_notify_handler() call in
acpi_button_remove() as appropriate. |
| ImageMagick before 6.9.13-57 and 7.x before 7.1.2-32 contains a stack overflow in the MSL decoder caused by an incorrect depth check that fails to limit recursion. Attackers can supply a set of crafted MSL images that exhaust the stack when one of them is read, crashing the process and causing a denial of service. |
| ImageMagick before 6.9.13-57 and 7.x before 7.1.2-32 contains a memory leak in the SVG encoder (WriteSVGImage) that fails to release allocated memory when handling crafted images. Attackers can supply crafted image files that are processed by the SVG encoder to leak memory and cause a denial of service through resource consumption. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_ct: fix missing expect put in obj eval
nft_ct_expect_obj_eval() allocates an expectation and may call
nf_ct_expect_related(), but never drops its local reference.
Add nf_ct_expect_put(exp) before return to balance allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: xfrm6: release dst on error in xfrm6_rcv_encap()
xfrm6_rcv_encap() performs an IPv6 route lookup when the skb does not
already have a dst attached. ip6_route_input_lookup() returns a
referenced dst entry even when the lookup resolves to an error route.
If dst->error is set, xfrm6_rcv_encap() drops the skb without attaching
the dst to the skb and without releasing the reference returned by the
lookup. Repeated packets hitting this path therefore leak dst entries.
Release the dst before jumping to the drop path. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: fix resource leaks on device setup failure
Make sure to call controller cleanup() if spi_setup() fails while
registering a device to avoid leaking any resources allocated by
setup(). |
