| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A security vulnerability has been detected in BioStar VIVID LED DJ 4.0.2411.1500. This affects the function sub_1105C of the file BS_LED64.sys of the component IOCTL Handler. The manipulation of the argument AssociatedIrp leads to write-what-where condition. Local access is required to approach this attack. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A weakness has been identified in Netcore NBR200V2 1.3.241127.071246. Impacted is the function wan_config_set_vlan of the file /usr/bin/routerd of the component WAN VLAN Reconfiguration. Executing a manipulation of the argument vlan_wanX.ports can lead to buffer overflow. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was identified in Totolink A3002MU Hh-B20211125.1046. Affected is the function formWlEncrypt of the file /boafrm/formWlEncrypt. The manipulation of the argument submit-url leads to buffer overflow. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. |
| A vulnerability was detected in BioStar VALKYRIE AURORA 2.10.2411.0800. This vulnerability affects the function sub_1105C of the file BS_RVSIO64.sys of the component IOCTL Handler. The manipulation of the argument PhysicalAddress results in write-what-where condition. The attack needs to be approached locally. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security vulnerability has been detected in Netcore NBR200V2 1.3.241127.071246. The affected element is the function vlan_load_form_uci of the file /usr/bin/routerd. The manipulation of the argument wan_num leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| The issue was addressed with improved memory handling. This issue is fixed in iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2, visionOS 27, watchOS 27. Processing maliciously crafted web content may lead to memory corruption. |
| The issue was addressed with improved memory handling. This issue is fixed in iOS 26.6.1 and iPadOS 26.6.1, macOS Sequoia 15.8, macOS Tahoe 26.6.2, tvOS 27, visionOS 27, watchOS 27. An app may be able to cause unexpected system termination or corrupt kernel memory. |
| The issue was addressed with improved memory handling. This issue is fixed in macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7. An app may be able to cause unexpected system termination or corrupt kernel memory. |
| A memory corruption issue was addressed with improved bounds checking. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10, macOS Golden Gate 27, macOS Sequoia 15.7.8, macOS Sonoma 14.8.8. Processing a maliciously crafted image may lead to a denial-of-service. |
| The issue was addressed with improved memory handling. This issue is fixed in iOS 26.6 and iPadOS 26.6, iOS 26.7 and iPadOS 26.7, macOS Sequoia 15.8, macOS Tahoe 26.6, macOS Tahoe 26.7, tvOS 26.6, watchOS 26.6. Processing a maliciously crafted video file may lead to unexpected app termination or corrupt process memory. |
| The issue was addressed with improved memory handling. This issue is fixed in iOS 26.6.1 and iPadOS 26.6.1, macOS Sequoia 15.8, macOS Tahoe 26.6.2, tvOS 27, visionOS 27, watchOS 27. An app may be able to cause unexpected system termination or corrupt kernel memory. |
| The issue was addressed with improved memory handling. This issue is fixed in iOS 26.7 and iPadOS 26.7, iOS 27 and iPadOS 27, macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7. A local attacker may be able to cause unexpected system termination or corrupt kernel memory. |
| The issue was addressed with improved memory handling. This issue is fixed in macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7. An app may be able to cause unexpected system termination. |
| An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7. Processing a maliciously crafted 3D file may lead to an out-of-bounds read. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix out-of-bounds read in ext4_read_inline_dir()
ext4_read_inline_dir() can read a dirent header past the end of its inline
buffer, triggering a slab-out-of-bounds read during getdents64():
BUG: KASAN: slab-out-of-bounds in __ext4_check_dir_entry
Read of size 2 at addr ffff88800f3dd23c by task exploit/148
...
__ext4_check_dir_entry
ext4_read_inline_dir
iterate_dir
The dirent payload lives in a buffer of exactly inline_size bytes:
dir_buf = kmalloc(inline_size, GFP_NOFS);
but iteration runs in a position space extra_offset bytes larger
(extra_size = extra_offset + inline_size) so the synthetic "." and ".."
land at their block-dir offsets. A dirent is formed at "dir_buf + pos -
extra_offset", yet the ext4_check_dir_entry() length argument uses the
larger extra_size. A position whose dirent header would extend past
extra_size is therefore accepted, and the rescan loop's rec_len probe and
ext4_check_dir_entry() dereference de->rec_len before the entry is rejected.
Reject a position whose minimum-size dirent header would not fit within
extra_size before forming de, in both the rescan and main loops, and pass
inline_size rather than extra_size to ext4_check_dir_entry() so the length
check matches the physical buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: validate usa_ofs before preserving the update sequence number
When ntfs_mft_record_alloc() reuses a free mft record it reads the old
update sequence number straight from the on-disk record:
usn = *(__le16 *)((u8 *)m + le16_to_cpu(m->usa_ofs));
Here m points into the raw $MFT page-cache folio, which still holds
unvalidated, MST-protected bytes: the folio is read by a plain
iomap_read_folio() and neither post_read_mst_fixup() nor
ntfs_mft_record_check() has run on it (both work on private copies).
m->usa_ofs is therefore an untrusted u16, and a corrupted record can put
it past the end of the record so the two-byte read lands outside the
folio. Reading such a record while creating a file gives, under KASAN:
BUG: KASAN: use-after-free in ntfs_mft_record_alloc+...
Read of size 2 at addr ...
ntfs_mft_record_alloc -> __ntfs_create -> ntfs_create -> path_openat
Only preserve the old update sequence number when usa_ofs is even and in
range, mirroring the check ntfs_mft_record_check() already applies;
otherwise leave usn zero, which the existing restore below skips. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: reject restart table growth beyond U16_MAX entries
During $LogFile replay, log_replay() indexes the transaction table by the
transact_id taken from the log record header. check_log_rec() only
verifies that transact_id is non-zero and properly aligned, not its
magnitude, so a crafted image can request an arbitrarily large index.
alloc_rsttbl_from_idx() grows the table to cover that index via
extend_rsttbl(), which passes the new entry count to init_rsttbl():
rt = init_rsttbl(esize, used + add);
used + add is computed as u32 but init_rsttbl() takes a u16, and the
count is stored in struct RESTART_TABLE as a __le16. When used + add
exceeds U16_MAX it is truncated, init_rsttbl() allocates a table far
smaller than the index requires, and alloc_rsttbl_from_idx() then
dereferences and writes at the original, untruncated offset -- an
out-of-bounds access past the allocation, reachable by mounting a
crafted NTFS image.
BUG: KASAN: use-after-free in alloc_rsttbl_from_idx (fs/ntfs3/fslog.c:950)
Read of size 4 at addr ffff8880327ffff8 by task exploit
alloc_rsttbl_from_idx (fs/ntfs3/fslog.c:950)
log_replay (fs/ntfs3/fslog.c:4562)
ntfs_loadlog_and_replay (fs/ntfs3/fsntfs.c:324)
ntfs_fill_super (fs/ntfs3/super.c:1393)
get_tree_bdev_flags
vfs_get_tree
path_mount
__x64_sys_mount
A restart table is limited to U16_MAX entries by its __le16 count, so a
larger growth request is invalid input. Reject it in extend_rsttbl();
all callers already handle a NULL return. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: check dir entry fits before reading the hash trailer in ext4_search_dir()
For casefolded encrypted directories ext4 stores an 8-byte hash trailer
after the name (EXT4_DIRENT_HASHES()), at an offset derived from
de->name_len. On the sb_no_casefold_compat_fallback() path ext4_match()
reads that trailer, but ext4_search_dir()'s by-hand pre-check only tests
de->name + de->name_len <= dlimit, which proves the name fits, not the
rounded trailer. A crafted entry whose name ends at the block boundary
passes the check while EXT4_DIRENT_HASHES(de) lands past the block end,
so ext4_match() reads out of bounds on an ordinary lookup. KASAN reports
it as a use-after-free when the page after the directory block holds a
freed object:
BUG: KASAN: use-after-free in ext4_match (fs/ext4/namei.c:1435)
Read of size 4 at addr ffff888010458000 by task exploit
Call Trace:
ext4_match (fs/ext4/namei.c:1435)
ext4_search_dir (fs/ext4/namei.c:1470)
__ext4_find_entry (fs/ext4/namei.c:1268 fs/ext4/namei.c:1632)
ext4_lookup (fs/ext4/namei.c:1703 fs/ext4/namei.c:1769)
...
filename_lookup (fs/namei.c:2842)
vfs_statx (fs/stat.c:353)
__do_sys_newfstatat (fs/stat.c:538)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Require, for hash-in-dirent directories, that the whole entry including
the rounded trailer fits before calling ext4_match(). This is the same
bound ext4_check_dir_entry() already enforces via ext4_dir_rec_len(), so
no well-formed entry is rejected. The other caller, ext4_find_dest_de(),
runs ext4_check_dir_entry() first and is unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_skbmod: fix length calculations and avoid invalid header warnings
syzbot reported a warning in skb_network_header_len() triggered
by tcf_skbmod_act():
!skb_transport_header_was_set(skb)
WARNING: CPU: 0 PID: 14949 at include/linux/skbuff.h:3243 skb_network_header_len include/linux/skbuff.h:3243 [inline]
WARNING: CPU: 0 PID: 14949 at net/sched/act_skbmod.c:55 tcf_skbmod_act+0xfe8/0x1810 net/sched/act_skbmod.c:55
There are a few issues in tcf_skbmod_act():
1. Calling skb_network_header_len() assumes skb->transport_header is set,
which is not guaranteed when tcf_skbmod_act() runs at TC ingress.
2. Unconditionally calling skb_mac_header_len() at the beginning of
tcf_skbmod_act() triggers a warning on L3 devices (e.g. TUN) where the
MAC header is unset, evaluating to an underflowed garbage length.
3. On TC ingress, skb->data points to the network header. Adding the MAC
header length to the IP header length causes skb_ensure_writable() to
request more bytes than the actual IP packet length, dropping valid
short packets (e.g. 28-byte UDP/IPv4 packets).
Fix these by:
- Using skb_network_offset(skb) + sizeof(struct iphdr/ipv6hdr) for
SKBMOD_F_ECN so that the required length is correctly calculated on
both ingress (offset == 0) and egress (offset == mac_len).
- Setting max_edit_len to ETH_HLEN for Ethernet header modifications
after validating ARPHRD_ETHER. |
| In the Linux kernel, the following vulnerability has been resolved:
hinic3: Fix skb linearization mismatch and drop skb when skb_checksum_help() failed
Previously, hinic3_send_one_skb() cached the skb fragment count before
calling hinic3_tx_offload(). If hinic3_tx_csum() falls back to
skb_checksum_help() for unsupported tunnel packets, the skb may be
linearized. Continuing to build the TX descriptor with the stale
fragment count leads to a descriptor mismatch, which can trigger
out-of-bounds DMA reads or IOMMU faults.
Furthermore, the old code ignored the return value of skb_checksum_help(),
transmitting corrupted packets with incomplete checksums upon failure.
Fix this by:
1. Moving the hinic3_tx_offload() call before calculating 'num_sge' to
ensure the correct fragment count is used if the SKB is linearized.
2. Propagating skb_checksum_help() errors and returning
HINIC3_TX_OFFLOAD_INVALID to properly drop the skb. |
