| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An issue was discovered on Swissphone DiCal-RED 4009 devices. An attacker with access to the file /etc/deviceconfig may recover the administrative device password via password-cracking methods, because unsalted MD5 is used. |
| A vulnerability was detected in PandaXGO PandaX up to fb8ff40f7ce5dfebdf66306c6d85625061faf7e5. This affects an unknown function of the file config.yml of the component JWT Secret Handler. The manipulation of the argument key results in use of hard-coded cryptographic key
. The attack may be performed from remote. This attack is characterized by high complexity. The exploitability is reported as difficult. The exploit is now public and may be used. This product utilizes a rolling release system for continuous delivery, and as such, version information for affected or updated releases is not disclosed. The project was informed of the problem early through an issue report but has not responded yet. |
| Reusing a nonce, key pair in encryption issue exists in "FreeFrom - the nostr client" App versions prior to 1.3.5 for Android and iOS. If this vulnerability is exploited, the content of direct messages (DMs) between users may be manipulated by a man-in-the-middle attack. |
| Certain Anpviz products contain a hardcoded cryptographic key stored in the firmware of the device. This affects IPC-D250, IPC-D260, IPC-B850, IPC-D850, IPC-D350, IPC-D3150, IPC-D4250, IPC-D380, IPC-D880, IPC-D280, IPC-D3180, MC800N, YM500L, YM800N_N2, YMF50B, YM800SV2, YM500L8, and YM200E10 firmware v3.2.2.2 and lower and possibly more vendors/models of IP camera. |
| php-censor v2.1.4 and fixed in v.2.1.5 was discovered to utilize a weak hashing algorithm for its remember_key value. This allows attackers to bruteforce to bruteforce the remember_key value to gain access to accounts that have checked "remember me" when logging in. |
| A vulnerability in the cryptographic logic used by HPE Aruba Networking EdgeConnect SD-WAN Gateways could allow an authenticated remote attacker to gain shell access. Successful exploitation could allow an attacker to execute arbitrary commands on the underlying operating system, potentially leading to unauthorized access and control over the affected systems. |
| An Improper Authorization vulnerability was identified in the EOL OVA based connect component which is deployed for installation purposes in the customer internal network. Under certain conditions, this could allow a bad actor to gain unauthorized access to the local db containing weakly hashed credentials of the installer. This EOL component was deprecated in September 2023 with end of support extended till January 2024. |
| ci solution CI-Out-of-Office Manager through 6.0.0.77 uses a Hard-coded Cryptographic Key. |
| A vulnerability has been identified in RUGGEDCOM i800 (All versions), RUGGEDCOM i801 (All versions), RUGGEDCOM i802 (All versions), RUGGEDCOM i803 (All versions), RUGGEDCOM M2100 (All versions), RUGGEDCOM M2200 (All versions), RUGGEDCOM M969 (All versions), RUGGEDCOM RMC30 (All versions), RUGGEDCOM RMC8388 V4.X (All versions), RUGGEDCOM RMC8388 V5.X (All versions < V5.10.0), RUGGEDCOM RP110 (All versions), RUGGEDCOM RS1600 (All versions), RUGGEDCOM RS1600F (All versions), RUGGEDCOM RS1600T (All versions), RUGGEDCOM RS400 (All versions), RUGGEDCOM RS401 (All versions), RUGGEDCOM RS416 (All versions), RUGGEDCOM RS416P (All versions), RUGGEDCOM RS416Pv2 V4.X (All versions), RUGGEDCOM RS416Pv2 V5.X (All versions < V5.10.0), RUGGEDCOM RS416v2 V4.X (All versions), RUGGEDCOM RS416v2 V5.X (All versions < V5.10.0), RUGGEDCOM RS8000 (All versions), RUGGEDCOM RS8000A (All versions), RUGGEDCOM RS8000H (All versions), RUGGEDCOM RS8000T (All versions), RUGGEDCOM RS900 (All versions), RUGGEDCOM RS900 (32M) V4.X (All versions), RUGGEDCOM RS900 (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RS900G (All versions), RUGGEDCOM RS900G (32M) V4.X (All versions), RUGGEDCOM RS900G (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RS900GP (All versions), RUGGEDCOM RS900L (All versions), RUGGEDCOM RS900M-GETS-C01 (All versions), RUGGEDCOM RS900M-GETS-XX (All versions), RUGGEDCOM RS900M-STND-C01 (All versions), RUGGEDCOM RS900M-STND-XX (All versions), RUGGEDCOM RS900W (All versions), RUGGEDCOM RS910 (All versions), RUGGEDCOM RS910L (All versions), RUGGEDCOM RS910W (All versions), RUGGEDCOM RS920L (All versions), RUGGEDCOM RS920W (All versions), RUGGEDCOM RS930L (All versions), RUGGEDCOM RS930W (All versions), RUGGEDCOM RS940G (All versions), RUGGEDCOM RS969 (All versions), RUGGEDCOM RSG2100 (All versions), RUGGEDCOM RSG2100 (32M) V4.X (All versions), RUGGEDCOM RSG2100 (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RSG2100P (All versions), RUGGEDCOM RSG2100P (32M) V4.X (All versions), RUGGEDCOM RSG2100P (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RSG2200 (All versions), RUGGEDCOM RSG2288 V4.X (All versions), RUGGEDCOM RSG2288 V5.X (All versions < V5.10.0), RUGGEDCOM RSG2300 V4.X (All versions), RUGGEDCOM RSG2300 V5.X (All versions < V5.10.0), RUGGEDCOM RSG2300P V4.X (All versions), RUGGEDCOM RSG2300P V5.X (All versions < V5.10.0), RUGGEDCOM RSG2488 V4.X (All versions), RUGGEDCOM RSG2488 V5.X (All versions < V5.10.0), RUGGEDCOM RSG907R (All versions < V5.10.0), RUGGEDCOM RSG908C (All versions < V5.10.0), RUGGEDCOM RSG909R (All versions < V5.10.0), RUGGEDCOM RSG910C (All versions < V5.10.0), RUGGEDCOM RSG920P V4.X (All versions), RUGGEDCOM RSG920P V5.X (All versions < V5.10.0), RUGGEDCOM RSL910 (All versions < V5.10.0), RUGGEDCOM RST2228 (All versions < V5.10.0), RUGGEDCOM RST2228P (All versions < V5.10.0), RUGGEDCOM RST916C (All versions < V5.10.0), RUGGEDCOM RST916P (All versions < V5.10.0). The affected devices support the TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 cipher suite, which uses CBC (Cipher Block Chaining) mode that is known to be vulnerable to timing attacks. This could allow an attacker to compromise the integrity and confidentiality of encrypted communications. |
| Cyberduck and Mountain Duck improper handle TLS certificate pinning for untrusted certificates (e.g., self-signed), since the certificate fingerprint is stored as SHA-1, although SHA-1 is considered weak.
This issue affects Cyberduck: through 9.1.6; Mountain Duck: through 4.17.5. |
| CyberGhostVPNSetup.exe (Windows installer) is signed using the weak cryptographic hash algorithm SHA-1, which is vulnerable to collision attacks. This allows a malicious actor to craft a fake installer with a forged SHA-1 certificate that may still be accepted by Windows signature verification mechanisms, particularly on systems without strict SmartScreen or trust policy enforcement. Additionally, the installer lacks High Entropy Address Space Layout Randomization (ASLR), as confirmed by BinSkim (BA2015 rule) and repeated WinDbg analysis. The binary consistently loads into predictable memory ranges, increasing the success rate of memory corruption exploits. These two misconfigurations, when combined, significantly lower the bar for successful supply-chain style attacks or privilege escalation through fake installers. |
| A vulnerability, which was classified as problematic, has been found in fossasia open-event-server 1.19.1. This issue affects the function send_email_change_user_email of the file /fossasia/open-event-server/blob/development/app/api/helpers/mail.py of the component Mail Verification Handler. The manipulation leads to reliance on obfuscation or encryption of security-relevant inputs without integrity checking. The attack may be initiated remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| NeuVector used a hard-coded cryptographic key embedded in the source
code. At compilation time, the key value was replaced with the secret
key value and used to encrypt sensitive configurations when NeuVector
stores the data. |
| CWE-328: Use of Weak Hash |
| A vulnerability was found in gooaclok819 sublinkX up to 1.8. It has been declared as problematic. This vulnerability affects unknown code of the file middlewares/jwt.go. The manipulation with the input sublink leads to use of hard-coded cryptographic key
. The attack can be initiated remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. Upgrading to version 1.9 is able to address this issue. The patch is identified as 778d26aef723daa58df98c8060c43f5bf5d1b10b. It is recommended to upgrade the affected component. |
| Padding oracle attack vulnerability in Oberon microsystem AG’s ocrypto library in all versions since 3.1.0 and prior to 3.9.2 allows an attacker to recover plaintexts via timing measurements of AES-CBC PKCS#7 decrypt operations. |
| The authentication process to the web server uses a challenge response procedure which
inludes the nonce and additional information. This challenge can be used several times for login and is
therefore vulnerable for a replay attack. |
| A vulnerability was identified in coze-studio up to 0.2.4. The impacted element is an unknown function of the file backend/domain/plugin/encrypt/aes.go. The manipulation of the argument AuthSecretKey/StateSecretKey/OAuthTokenSecretKey leads to use of hard-coded cryptographic key
. It is possible to initiate the attack remotely. The attack is considered to have high complexity. The exploitability is regarded as difficult. To fix this issue, it is recommended to deploy a patch. The vendor replied to the GitHub issue (translated from simplified Chinese): "For scenarios requiring encryption, we will implement user-defined key management through configuration and optimize the use of encryption tools, such as random salt." |
| Cryptographic Flaw in PDFium in Google Chrome prior to 147.0.7727.55 allowed an attacker to read potentially sensitive information from encrypted PDFs via a brute-force attack. (Chromium security severity: Medium) |
| Configured cipher preference order not preserved vulnerability in Apache Tomcat.
This issue affects Apache Tomcat: from 11.0.16 through 11.0.18, from 10.1.51 through 10.1.52, from 9.0.114 through 9.0.115.
Users are recommended to upgrade to version 11.0.20, 10.1.53 or 9.0.116, which fix the issue. |
