| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: bound uniname advance in exfat_find_dir_entry()
In exfat_find_dir_entry(), each TYPE_EXTEND (file name) entry advances the
output pointer by a fixed amount while the loop guard only tracks the
accumulated name length:
if (++order == 2)
uniname = p_uniname->name;
else
uniname += EXFAT_FILE_NAME_LEN;
len = exfat_extract_uni_name(ep, entry_uniname);
name_len += len;
unichar = *(uniname+len);
*(uniname+len) = 0x0;
uniname grows by EXFAT_FILE_NAME_LEN (15) per name entry, but name_len
grows only by the actual extracted length, which is shorter when a name
fragment contains an early NUL. The only guard is
`name_len >= MAX_NAME_LENGTH`, so a crafted directory with many short
name fragments lets uniname run far past the
p_uniname->name[MAX_NAME_LENGTH + 3] buffer while name_len stays small,
causing an out-of-bounds read and write at *(uniname+len).
The sibling extractor exfat_get_uniname_from_ext_entry() already stops
on a short fragment (the lockstep `len != EXFAT_FILE_NAME_LEN` guard
added in commit d42334578eba ("exfat: check if filename entries exceeds
max filename length")); exfat_find_dir_entry() never got the
equivalent. Track the per-entry write offset as a count and reject a
fragment once the offset, or the offset plus the extracted length, would
exceed MAX_NAME_LENGTH, before forming the output pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - bound the F3A keymap to the GPIO count
rmi_f3a_initialize() takes the GPIO count from the device query register
(f3a->gpio_count = buf & RMI_F3A_GPIO_COUNT, range 0..127).
rmi_f3a_map_gpios() then allocates gpio_key_map with
min(gpio_count, TRACKSTICK_RANGE_END) == at most 6 entries, but
rmi_f3a_attention() iterates the full gpio_count and dereferences
gpio_key_map[i], and input->keycodemax is set to the full gpio_count
while input->keycode points at the 6-entry allocation.
A device that reports gpio_count > 6 therefore causes an out-of-bounds
read of gpio_key_map[] on every attention interrupt, and out-of-bounds
accesses through the input core's default keymap ioctls: EVIOCGKEYCODE
reads past the buffer (leaking adjacent slab memory to user space) and
EVIOCSKEYCODE writes a caller-controlled value past it, for any process
able to open the evdev node, since input_default_getkeycode() and
input_default_setkeycode() only bound the index against keycodemax.
Size the keymap for the full gpio_count. The mapping loop is unchanged:
it still assigns only the first min(gpio_count, TRACKSTICK_RANGE_END)
entries; the remaining slots stay KEY_RESERVED (devm_kcalloc zero-fills)
and are skipped when reporting. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix DATA decrypt vs splice() by copying data to buffer in recvmsg
This improves the fix for CVE-2026-43500.
Fix the pagecache corruption from in-place decryption of a DATA packet
transmitted locally by splice() by getting rid of the packet sharing in the
I/O thread and unconditionally extracting the packet content into a bounce
buffer in which the buffer is decrypted. recvmsg() (or the kernel
equivalent) then copies the data from the bounce buffer to the destination
buffer. The sk_buff then remains unmodified.
This has an additional advantage in that the packet is then arranged in the
buffer with the correct alignment required for the crypto algorithms to
process directly. The performance of the crypto does seem to be a little
faster and, surprisingly, the unencrypted performance doesn't seem to
change much - possibly due to removing complexity from the I/O thread.
Yet another advantage is that the I/O thread doesn't have to copy packets
which would slow down packet distribution, ACK generation, etc..
The buffer belongs to the call and is allocated initially at 2K,
sufficiently large to hold a whole jumbo subpacket, but the buffer will be
increased in size if needed. However, to take this work, MSG_PEEK may
cause a later packet to be decrypted into the buffer, in which case the
earlier one will need re-decrypting for a subsequent recvmsg().
Note that rx_pkt_offset may legitimately see 0 as a valid offset now, so
switch to using USHRT_MAX to indicate an invalid offset.
Note also that I would generally prefer to replace the buffers of the
current sk_buff with a new kmalloc'd buffer of the right size, ditching the
old data and frags as this makes the handling of MSG_PEEK easier and
removes the re-decryption issue, but this looks like quite a complicated
thing to achieve. skb_morph() looks half way to what I want, but I don't
want to have to allocate a new sk_buff. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: validate rx_req_idx to prevent out-of-bounds array access
In mana_hwc_rx_event_handler(), rx_req_idx is derived from
sge->address in DMA-coherent memory. In Confidential VMs
(SEV-SNP/TDX), this memory is shared unencrypted and HW can modify
WQE contents at any time. No bounds check exists on rx_req_idx,
which can lead to an out-of-bounds access into reqs[].
Add bounds check on rx_req_idx in mana_hwc_rx_event_handler() before
using it to index the reqs[] array. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: Check for underflow in xfrm_state_mtu
Leo Lin reported OOB write issue in esp component:
xfrm_state_mtu() returns u32 but performs its arithmetic in unsigned
modulo-2^32 space using an attacker-influenced "header_len + authsize +
net_adj" subtracted from a small "mtu" argument. A nobody user can
install an IPv4 ESP tunnel SA with a large authentication key
(XFRMA_ALG_AUTH_TRUNC, e.g. hmac(sha512), 64-byte key, 64-byte trunc),
configure a small interface MTU (68 bytes), and set XFRMA_TFCPAD to a
large value. When a single UDP datagram is then sent through the
tunnel, xfrm_state_mtu() underflows to a near-2^32 value, and
esp_output() consumes it as a signed int via:
padto = min(x->tfcpad, xfrm_state_mtu(x, mtu_cached))
esp.tfclen = padto - skb->len (assigned to int)
esp.tfclen ends up negative (e.g. -207). It is sign-extended to size_t
when passed to memset() inside esp_output_fill_trailer(), producing a
~16 EB write of zeroes at skb_tail_pointer(skb). KASAN logs it as
"Write of size 18446744073709551537 at addr ffff888...".
Check for underflow and return 1. This causes the sendmsg attempt to
fail with ENETUNREACH. |
| An issue was discovered on Tektronix 3 Series MDO devices before 1.21.1. An OS command injection vulnerability exists in the FILESystem:MOUNT:DRIve SCPI command handler. Insufficient neutralization of user-supplied input allows remote attackers to execute arbitrary operating system commands with elevated privileges. |
| Netpbm through 11.16.00 contains a heap out-of-bounds write vulnerability in the rasttopnm Sun rasterfile run-length decoder pr_load_image in converter/other/rast.c. Attackers can supply a byte-encoded rasterfile with tiny dimensions and a long run-length body to write controlled bytes past md_image, causing memory corruption and crashes. |
| Schism Tracker through 20260524 contains a heap out-of-bounds write vulnerability in fmt_ult_load_song() in fmt/ult.c that fails to clamp the one-byte sample count to MAX_SAMPLES. Attackers can supply a crafted .ult module that overwrites the instruments pointer array, causing csf_destroy() to free attacker-chosen pointers and crash the application. |
| When semop(2) blocks waiting for a semaphore condition, it releases the per-set lock and sleeps. Upon waking, it checks the sequence number embedded in the semaphore set's IPC identifier to detect whether the set was removed while the caller was asleep. This sequence number is only 15 bits wide. If enough semaphore sets are created and destroyed in the same table slot while a caller is blocked, the counter wraps around, and semop(2) may falsely conclude that the original set still exists. The subsequent access to a semaphore within the set may then be out of bounds.
An unprivileged local user can trigger an out-of-bounds access on kernel heap memory, potentially leading to privilege escalation. |
| Substance3D - Stager is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Substance3D - Stager is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Substance3D - Stager is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Substance3D - Stager is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Substance3D - Stager is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Substance3D - Stager is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Substance3D - Stager is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Substance3D - Stager is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Netgate pfSense CE through 2.9.0 contains an OS command injection vulnerability that allows authenticated users to execute commands as root by supplying a crafted wireless parent interface name. Attackers with limited Wireless Edit or Interface Assignments privileges can submit values like ath0;<cmd> via interfaces_wireless_edit.php or interfaces_assign.php, which interface_wireless_clone() interpolates unescaped into an ifconfig shell command. |
| Netgate pfSense CE 2.5.0 through 2.9.0 contains an OS command injection vulnerability in openvpn.learn-address.sh that allows authenticated VPN clients to execute commands as the unbound user. Attackers can embed shell metacharacters in the certificate common name or username, which is interpolated unquoted into su -c strings, when DNS Resolver client registration is enabled. |
| reNgine up to v2.2.0 and current master branch (commit de4199222cca5618f1255930ce78987e47d43a99) is vulnerable to OS Command Injection via the custom_headers scan engine configuration field in web/reNgine/tasks.py (fetch_url and dir_file_fuzz functions). |
