| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: add INIT verification after cookie unpacking
In SCTP handshake, the INIT chunk is initially processed by the server
and embedded into the cookie carried in INIT-ACK. The client then
returns this cookie via COOKIE-ECHO, where the server unpacks it and
reconstructs the original INIT chunk.
When cookie authentication is enabled, the cookie contents are protected
against tampering, so reusing the unpacked INIT without re-verification
is safe.
However, when cookie authentication is disabled, the reconstructed INIT
can no longer be trusted. In this case, the INIT must be explicitly
validated after unpacking to avoid processing potentially tampered data.
Add sctp_verify_init() checks after cookie unpacking in COOKIE-ECHO
processing paths (sctp_sf_do_5_1D_ce() and sctp_sf_do_5_2_4_dupcook())
when cookie_auth_enable is disabled. On failure, the new association is
freed and the packet is discarded.
Also tighten cookie validation in sctp_unpack_cookie() by verifying the
embedded chunk type is SCTP_CID_INIT before treating it as an INIT
chunk.
Finally, update sctp_verify_init() to validate parameter bounds using
the actual embedded INIT length instead of chunk->chunk_end, since the
INIT stored in COOKIE-ECHO may not span the entire chunk buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: hwmon: Remove hwmon class device along with its parent
The current code creates one hwmon device per thermal zone type and that
device is registered under the first thermal zone of the given type.
That turns out to be problematic when the thermal zone holding the
hwmon device is removed.
For example, say that there are two ACPI thermal zones on a system
/sys/devices/virtual/thermal/thermal_zone0/
/sys/devices/virtual/thermal/thermal_zone1/
The current code registers a hwmon class device for thermal_zone0 only:
/sys/devices/virtual/thermal/thermal_zone0/hwmon0/
because the type is "acpitz" for both of them, but it adds a sysfs
attribute that belongs to thermal_zone1 under it:
/sys/devices/virtual/thermal/thermal_zone0/hwmon0/temp2_input
There is also
/sys/devices/virtual/thermal/thermal_zone0/hwmon0/temp1_input
which belongs to thermal_zone0.
When thermal_zone0 is removed, say because the ACPI thermal driver is
unbound from the underlying platform device, thermal_remove_hwmon_sysfs()
skips the removal of hwmon0 because of the temp2_input attribute
belonging to thermal_zone1 which effectively prevents thermal_zone0
removal from making progress.
Address this by making thermal_remove_hwmon_sysfs() remove the entire
hwmon class device interface for the given thermal zone type when the
thermal zone device holding it is removed.
To prevent races with thermal_add_hwmon_sysfs() that may interfere
with this, carry out the entire addition and removal of hwmon sysfs
interfaces for thermal zones under thermal_hwmon_list_lock.
Also adjust the layout of the labels in thermal_add_hwmon_sysfs() to
the current kernel coding style to align with the new "unlock" label. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-fabrics: fix DHCHAP secret leak on parse failure
nvmf_parse_options() duplicates dhchap_secret and dhchap_ctrl_secret
with match_strdup() before validating the DHHC-1: representation.
If validation fails, the parser returns -EINVAL before the temporary
string in p is assigned to opts->dhchap_secret or
opts->dhchap_ctrl_secret. nvmf_create_ctrl() subsequently frees opts,
but nvmf_free_options() cannot release the unassigned temporary string.
Each rejected option therefore leaks one allocation.
This is easy to miss because valid secrets transfer ownership to opts
and are freed normally, while the malformed-secret path still returns
the expected -EINVAL to userspace.
With CONFIG_NVME_HOST_AUTH enabled, the leak is reachable before the
required-option checks and transport lookup. No NVMe-oF target or
working transport connection is required; for example, repeatedly
writing
dhchap_secret=BAD
or
dhchap_ctrl_secret=BAD
to /dev/nvme-fabrics deterministically takes the leaking parse path.
Free the temporary string before leaving both validation error paths.
Use kfree_sensitive() because the copied option may contain secret
material even when its representation is rejected, matching the
sensitive cleanup used for stored DHCHAP secrets. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/amd/core: Avoid enabling BRS from the SVM reload path
Branch Sampling (BRS) and Last Branch Record (LBR) are mutually
exclusive hardware features, and users of both are tracked via
cpuc->lbr_users.
When SVM is toggled on a CPU, the host perf events are reprogrammed to
update the HostOnly filter bit (set when virtualization is enabled,
cleared when it is disabled). On PerfMonV2-capable processors, this
reprogramming is performed by calling amd_pmu_enable_all() to rewrite
the event selectors. However, amd_pmu_enable_all() also calls
amd_brs_enable_all(), which enables BRS whenever cpuc->lbr_users > 0.
Having active LBR events satisfies this gating on processors that have
LBR but not BRS. The kernel then tries to set the BRS enable bit in
DebugExtnCfg (MSR 0xc000010f). Since that bit is deprecated on such
hardware, the write results in a #GP:
Call Trace:
<IRQ>
amd_pmu_enable_all+0x1d/0x90
amd_pmu_disable_virt+0x62/0xb0
kvm_arch_disable_virtualization_cpu+0xa/0x40 [kvm]
hardware_disable_nolock+0x1a/0x30 [kvm]
__flush_smp_call_function_queue+0x9b/0x410
__sysvec_call_function+0x18/0xc0
sysvec_call_function+0x69/0x90
</IRQ>
<TASK>
asm_sysvec_call_function+0x16/0x20
RIP: 0010:cpuidle_enter_state+0xc4/0x450
? cpuidle_enter_state+0xb7/0x450
cpuidle_enter+0x29/0x40
cpuidle_idle_call+0xf5/0x160
do_idle+0x7b/0xe0
cpu_startup_entry+0x26/0x30
start_secondary+0x115/0x140
secondary_startup_64_no_verify+0x194/0x19b
</TASK>
Fix this by ensuring that BRS is not enabled from the event selector
reprogramming path even when cpuc->lbr_users > 0. |
| The Download Manager WordPress plugin before 3.3.71, Download Manager WordPress plugin before 7.5.9 does not have CSRF checks in some places, allowing attackers to make a logged in admin update its privacy and storage settings via a crafted link, including the credential that gates its unauthenticated maintenance endpoint. |
| A flaw was found in Samba's CTDB, the clustered database service used by Samba. Insufficient integrity validation of received CTDB protocol packets allows malformed packets containing invalid field lengths, improperly terminated strings, or inconsistent packet sizes to be processed without adequate bounds checking. A remote attacker with access to the CTDB private network may trigger a denial of service through process crashes or excessive memory consumption and, in limited cases, disclose adjacent memory contents. |
| Cross-Site Request Forgery (CSRF) vulnerability in e4jvikwp VikRentCar vikrentcar allows Cross Site Request Forgery.This issue affects VikRentCar: from n/a through 1.4.8. |
| Apache Airflow Amazon provider: the AWS auth manager's SAML login flow does not bind the authentication response to the browser that began it. The login handler discards the AuthnRequest ID and the callback validates the assertion without requiring a matching InResponseTo, so an unauthenticated attacker who can cause a victim to load a page can complete a SAML login in the victim's browser using the attacker's own assertion, silently logging the victim into the attacker's Airflow account. Subsequent work the victim performs lands in a session the attacker controls.
Affects deployments using the AWS auth manager with SAML authentication. The victim needs only to visit an attacker-controlled page; no Airflow account or credential is required of the attacker. This is the same login-CSRF class fixed in the Keycloak auth manager as CVE-2026-40948.
Users of apache-airflow-providers-amazon are recommended to upgrade to version 9.38.0, which fixes the issue. |
| Joomla Extension - svenbluege.de - CSRF in image upload in Event Gallery extension < 6.5.0 - Due to lack of an CSRF token check, a third-party site can upload files to an event and overwrite existing files with the same name. |
| Joomla Extension - svenbluege.de - CSRF in various cart actions in Event Gallery extension < 6.5.0 |
| Missing integrity verification in the Triton inference handler in Amazon SageMaker Python SDK v2 before v2.257.2 and v3 before v3.8.0 might allow a remote authenticated actor to achieve code execution in inference containers via replacement of model artifacts in S3 with a specially crafted pickle payload that is deserialized without verification. This issue requires a remote authenticated actor with S3 write access to the model artifact path.
To remediate this issue, we recommend upgrading to Amazon SageMaker Python SDK v2.257.2 or v3.8.0 and rebuild any Triton models previously created with ModelBuilder using the updated SDK. |
| Cross-Site Request Forgery vulnerability, whose exploitation could allow an attacker to perform different actions on the platform as an administrator, simply by changing the token value to "admin". It is also possible to perform POST, GET and DELETE requests without any token value. Therefore, an unprivileged remote user is able to create, delete and modify users within theapplication. |
| Nginx UI is a web user interface for the Nginx web server. From 2.0.0 until 2.5.0, AuthRequired accepts a browser-managed token cookie as an API credential after the front end stores the JWT in that cookie. Because management endpoints do not universally require a CSRF token or perform Origin or Referer validation, a remote attacker can induce a logged-in administrator's browser to submit authenticated cross-site state-changing requests, including POST /api/configs. The attack requires an administrator account without OTP/Passkey or a target endpoint that does not require secure-session proof. The attacker cannot read the cross-origin response but can modify Nginx configuration, trigger reloads, or invoke other management operations reachable with the victim's session. This issue is fixed in version 2.5.0. |
| phpMyFAQ before 4.1.9 and 4.2.0-alpha before 4.2.0-beta contains a cross-site request forgery vulnerability in the Elasticsearch and OpenSearch administration API endpoints, which do not validate a CSRF token for the create, drop, and import actions. Attackers can lure a user with CONFIGURATION_EDIT permission to a malicious page that triggers these actions, deleting search indexes, forcing re-indexing, or exhausting resources. |
| phpMyFAQ 4.0.0 before 4.1.9 contains a cross-site request forgery vulnerability in the POST /admin/api/update-database endpoint, which executes database migrations without validating a CSRF token. Attackers can lure a logged-in user with the CONFIGURATION_EDIT permission into submitting a crafted cross-site request, triggering migrations that may impact database integrity or availability. |
| The Hotel Booking WordPress plugin through 3.8 does not implement CSRF protection on its administrative booking order management, allowing attackers to trick a logged-in administrator into creating, deleting, or modifying arbitrary booking order records via a forged request. |
| The Gitea OpenID association callback in the security settings accepted a positive OpenID 2.0 assertion without checking that the signed-in user had started the linking. Because OpenID 2.0 allows unsolicited assertions, an attacker-controlled OpenID provider could attach the attacker's identity to the account of a signed-in victim who opened a crafted link, and the attacker could then sign in as the victim through OpenID login, which does not apply the local TOTP or WebAuthn checks. The callback now requires a time-limited `state` value bound to the user. |
| Improperly implemented security check for standard in Microsoft PowerShell allows an unauthorized attacker to bypass a security feature over a network. |
| `POST /{owner}/{repo}/topics` was registered without the sign-in middleware that provides the cross-origin protection, so a request issued by a third-party site was not rejected. A repository administrator who visited a malicious page could have the topics of their repository changed. No other repository settings were reachable through this route. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: fix more places with wrong ipv6 transport offsets
Sashiko reports for more incorrect IPv6 transport offsets.
The app code for TCP was assuming IPv4 network header
even after the ipvsh argument was provided. This can
cause problems with apps over IPv6. As for the only
official app in the kernel tree (FTP) this problem is
harmless because we use Netfilter to mangle the FTP
ports and we do not adjust the TCP seq numbers.
Also, provide correct offset of the ICMPV6 header in
ip_vs_out_icmp_v6() for correct checksum checks when
the IPv6 packet has extension headers. |
