| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: take invalidate_lock in ntfs_setattr_size()
ntfs_setattr_size() updates i_size and resizes the on-disk attribute
without holding mapping->invalidate_lock. Page faults take the lock
shared, so a fault racing the resize can resolve a VCN against the
transient runlist state of ntfs_non_resident_attr_expand() and fail
with a spurious SIGBUS, and can interleave with the size-change
epilogue (truncate_pagecache(), i_size_write(),
pagecache_isize_extended()).
Take invalidate_lock exclusively around the whole resize after
inode_dio_wait(), matching the fallocate path and other filesystems
such as xfs, which wraps truncate in its mmaplock (= invalidate_lock). |
| In the Linux kernel, the following vulnerability has been resolved:
page_pool: keep frag_offset aligned for odd-sized requests
page_pool_alloc_frag_netmem() rounds the requested fragment size with
size = ALIGN(size, dma_get_cache_alignment());
dma_get_cache_alignment() returns 1 unless the architecture defines
ARCH_DMA_MINALIGN, which DMA-coherent architectures such as x86 do not.
There the ALIGN() is a no-op and pool->frag_offset advances by the raw,
unrounded size.
A single caller asking for an odd size then leaves frag_offset misaligned
for every fragment carved out of that page afterwards. The pool is shared,
so the damage is not confined to the caller that caused it.
The per-cpu system_page_pool used by generic XDP hits this.
skb_pp_cow_data() allocates its fragments with the raw packet length:
size = min_t(u32, len, PAGE_SIZE);
truesize = size;
page = page_pool_dev_alloc(pool, &page_off, &truesize);
leaving frag_offset odd for whatever is carved out of that page next. Its
own head allocation is already aligned -- SKB_HEAD_ALIGN(size) plus the
XDP_PACKET_HEADROOM its callers pass -- so it is a later user of the shared
pool that pays: page_pool_dev_alloc_va() returns a misaligned buffer,
napi_build_skb() installs it as skb->head, and skb_shinfo(skb) ==
skb->head + skb->end is misaligned with it.
skb_shinfo()->dataref is a 4-byte atomic_t at offset 0x20, so the
atomic_inc() in __skb_clone() straddles a cache line. On x86 with split
lock detection -- fatal for kernel split locks by default -- this panics
the machine:
Oops: Split lock detected
RIP: 0010:skb_clone+0x154/0x1e0
Call Trace:
<IRQ>
raw_local_deliver+0x1ed/0x2c0
ip_protocol_deliver_rcu+0x54/0x1c0
ip_local_deliver_finish+0x85/0x100
ip_local_deliver+0x67/0x100
__netif_receive_skb_one_core+0x85/0xa0
process_backlog+0x87/0x130
Reproduced by attaching any generic-mode XDP program to loopback and
opening a RAW IPPROTO_UDP socket, which makes raw_local_deliver() clone
every locally delivered UDP packet; ordinary DNS traffic then triggers it,
roughly once per 2500 clones. Observed on 6.12.101 and 7.1.8.
Tracing page_pool_alloc_frag_netmem() over one such run shows the
amplification -- two odd-sized requests, nine misaligned offsets:
requested size & 7: 0: 17035 5: 1 7: 1
frag_offset & 7: 0: 17028 3: 1 4: 1 5: 1 6: 1 7: 5
and skb_pp_cow_data() returning heads that were aligned on entry:
head 0xffff8f4c86aeac00 -> 0xffff8f4c53a9a9c4 (&7=4)
head 0xffff8f4d6a8a42c0 -> 0xffff8f4c4f7b7a45 (&7=5)
Round the fragment size up to at least the alignment struct skb_shared_info
requires, so fragments are always suitably aligned for the objects callers
build on them. Architectures needing a larger DMA alignment keep it.
This also makes the remainder computed in page_pool_alloc_netmem(),
*size = max_size - *offset;
aligned, since max_size is a power of two -- which fixes the matching
misalignment of skb->end.
Verified with a controlled A/B under QEMU/KVM: same tree, same config,
same compiler, same rootfs and identical traffic, differing only by this
patch. A SEC("xdp.frags") XDP_PASS program on lo plus UDP datagrams
larger than max_head_size drives skb_pp_cow_data()'s fragment loop, which
passes raw packet lengths to the pool. Measured at the return of
skb_pp_cow_data():
unpatched patched
skb_pp_cow_data calls 40800 40800
misaligned skb->head 1120 0
dataref at line offset >60 80 0
The last row counts the accesses that actually fault:
skb_shinfo()->dataref sits at head+end+0x20 and is a 4-byte atomic, so
`lock incl` splits a 64-byte cache line only when that address lands at
offset 61..63. All 80 occurrences were at offset 61; the panic reported
above was at offset 62. Eliminating the misalignment removes every one
of them.
Same class of bug as commit 3bed3cc4156e ("net: Do not allocate page
fragments t
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_flower: validate mask pointer after nla_next()
fl_set_enc_opt() iterates the key's nested tunnel-option attributes
with nla_for_each_attr() while advancing a single mask pointer via
nla_next() at the bottom of each loop, so the mask cursor is driven
by the number of key attributes rather than by the mask's own
attributes. The nla_ok() added by commit c96adff956191 ("cls_flower:
call nla_ok() before nla_next()") only validates the mask pointer
that was just consumed; the pointer produced by nla_next() is used by
the next iteration (fl_set_geneve_opt() and siblings) without any
validation.
The mask's nested attributes are validated with NL_VALIDATE_LIBERAL,
which merely warns on trailing bytes that do not form a complete
attribute. A mask carrying one valid attribute plus 1-3 residue
bytes (or a non-aligned attribute length making msk_depth negative)
therefore reaches the next iteration with msk_depth != 0, so neither
the !msk_depth check in fl_set_enc_opt() nor the !depth check in the
per-type helpers fires. nla_type() then reads past the mask payload
and nla_parse_nested_deprecated() iterates with an nla_len taken
from those bytes, reading well beyond the mask attribute (KASAN:
slab-out-of-bounds read in __nla_validate_parse from fl_change()).
Validate the advanced mask pointer as well: when the mask is not
legitimately exhausted (msk_depth != 0) and the new pointer fails
nla_ok(), reject the filter with -EINVAL. An exactly exhausted mask
still skips the check, preserving exact-match behaviour for the
remaining key attributes. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/cancel: don't spin on local work the task can't run
io_uring_cancel_generic() refuses to sleep while any ring on the exiting
task's tctx has local work pending. It assumes the task is that ring's
submitter and that the next io_uring_try_cancel_requests() pass will run
the work. This does not hold for a ring that was still
IORING_SETUP_R_DISABLED when the task got its tctx node from
io_uring_create() or io_ringfd_register(). The submitter is set later by
IORING_REGISTER_ENABLE_RINGS, possibly from another task, and only the
submitter may run local work on an IORING_SETUP_DEFER_TASKRUN ring. To
the exiting task the work stays pending forever, the loop never reaches
schedule(), and the task trips the WARN_ON_ONCE() once and then spins in
do_exit().
An unprivileged user can set this up at will by creating a disabled
ring, having a child enable it and stop, posting to the ring with
IORING_OP_MSG_RING and exiting with a request in flight that only the
child can complete. The exiting thread burns a CPU until the child runs
or dies, and with panic_on_warn set the WARN panics the kernel.
Fix by skipping the sleep only when io_allowed_defer_tw_run() allows the
task to run the work. This is reasonable since work it cannot run cannot
complete any of its requests either, so nothing is lost by sleeping.
Drop the WARN_ON_ONCE() since handing a disabled ring to another thread
is a supported scenario, not a bug state. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix capability check in xfs
An user reported a bug where he managed to evade group's quota
by changing a file's gid to a different group id the same user
belonged to, even though quotas were enforced on both gids and the
file's size was big enough to exceed the quota's hardlimit.
Commit eba0549bc7d1 replaced a capable() call by a
has_capability_noaudit() to prevent unnecessary selinux audit messages.
Turns out that both calls have slightly different semantics even though
their documentation seems similar. Where in a nutshell:
capable() - Tests the task's effective credentials
has_ns_capability_noaudit() - Tests the task's real credentials
This most of the time has no practical difference but in some cases like
changing attrs (specifically group id in this case) through a NFS client
this will allow the quota code to use XFS_QMOPT_FORCE_RES, effectively
bypassing quota accounting checks.
Using instead ns_capable_noaudit() should fix this issue and prevent
selinux audit messages.
This also fix the remaining calls to has_capability_noaudit() |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: don't hold buffer locks across sync transaction commit in xfs_sync_sb_buf
xfs_sync_sb_buf() holds sb/rtsb buffer locks across a synchronous
xfs_trans_commit(), which flushes the CIL push workqueue internally.
If shutdown occurs during the CIL push, xfs_buf_item_unpin() needs to
lock these buffers to fail them, causing a deadlock:
setlabel: holds buf lock -> flush_workqueue(xfs-cil)
CIL push worker: xfs_buf_item_unpin -> xfs_buf_lock(same buf)
Remove the xfs_trans_bhold() calls so that commit releases the buffer
locks normally. After the sync commit, re-acquire the buffers via
mp->m_sb_bp / mp->m_rtsb_bp for the on-disk writeback. |
| In the Linux kernel, the following vulnerability has been resolved:
mac802154: fix data race and NULL deref on local->assoc_dev
local->assoc_dev is shared between the association path and the
association-response worker without common synchronization.
mac802154_perform_association() stores the coordinator pointer and waits
for a response. Its timeout and error paths clear the pointer and return
to mac802154_associate(), which may then free the coordinator object.
Meanwhile, mac802154_rx_mac_cmd_worker() may observe the associating bit
and enter mac802154_process_association_resp(), which dereferences
assoc_dev.
The worker's bit test and the handler's pointer dereference are not
atomic with respect to cleanup. Cleanup can clear assoc_dev between them,
causing a NULL dereference, or free the coordinator while the response
handler still uses the pointer.
The recorded result is exposed to the same window. assoc_status and
assoc_addr are written by the handler but read by the association path
while the associating bit is still set, so a second response for the same
request - a malicious one, for instance - can replace them between those
reads and leave the caller with an incoherent status and address pair.
The response handler only needs the coordinator extended address.
Replace assoc_dev with a cached address, removing the pointer lifetime
dependency. Protect the cached address and the associating bit with a
dedicated spinlock. A READ_ONCE()/WRITE_ONCE() pair would not guarantee
an atomic __le64 access on all 32-bit architectures.
wpan_dev->association_lock cannot be reused here: nl802154_associate()
holds it across rdev_associate(), hence for the whole of
mac802154_perform_association() including the wait for the response.
A response handler taking that lock would only get it once the
association has already given up.
Reset the completion, publish the cached address, and set the associating
bit while holding the lock. The response handler takes the lock, rechecks
the bit and the cached address, records the response, clears the bit, and
only then completes the waiter. Thus cleanup cannot pass the handler
between its state check and completion, and the cached 64-bit value
cannot tear.
The handler clears the bit before completing, not the woken waiter:
otherwise complete() is issued under the lock and a second (e.g.
malicious) response can reacquire it before the waiter and replace the
result. So a wait that returns success implies the bit is already clear,
and the success and negative-response paths return directly. The
transmit-error and timeout paths still clear it under assoc_lock, which
serializes any racing response against the cleanup while the call returns
the error it already selected. Both paths snapshot assoc_status and
assoc_addr under the same lock.
Both users run in process context, so a plain spinlock is sufficient.
The lock is not held while waiting for the completion. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: fix use-after-free in do_tcp_getsockopt(TCP_CC_INFO)
do_tcp_getsockopt() reads icsk->icsk_ca_ops and dereferences the
get_info function pointer without rcu_read_lock(). With BPF struct_ops
congestion control, ca_ops can point to dynamically allocated memory
that is freed concurrently, resulting in a use-after-free when the
kernel dereferences or calls through the stale pointer.
BUG: KASAN: slab-use-after-free in do_tcp_getsockopt+0x2037/0x23e0
Read of size 8 at addr ffff888013701258 by task exploit/149
do_tcp_getsockopt+0x2037/0x23e0 (net/ipv4/tcp.c:4564)
tcp_getsockopt+0x91/0xf0
__sys_getsockopt+0xf7/0x170
Fix this by wrapping the ca_ops load and get_info call within
rcu_read_lock()/rcu_read_unlock(), and using READ_ONCE() to load
the icsk_ca_ops pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: fix use-after-free in do_tcp_getsockopt(TCP_CONGESTION)
do_tcp_getsockopt() reads icsk->icsk_ca_ops->name without holding
rcu_read_lock(). Since commit 0baf26b0fcd7 ("bpf: tcp: Support
tcp_congestion_ops in bpf"), icsk_ca_ops can point to dynamically
allocated BPF struct_ops memory that may be freed concurrently via
setsockopt(TCP_CONGESTION), leading to a use-after-free.
BUG: KASAN: slab-use-after-free in _copy_to_user+0x37/0x60
Read of size 16 at addr ffff888013505260 by task exploit/149
_copy_to_user+0x37/0x60
do_tcp_getsockopt+0x158a/0x2460 (net/ipv4/tcp.c:4585)
tcp_getsockopt+0x91/0xf0
__sys_getsockopt+0xf7/0x170
Fix this by holding rcu_read_lock() around the ca_ops->name access,
using READ_ONCE() to load icsk_ca_ops, and copying the name to a
stack buffer before releasing the lock. Also annotate the relevant
icsk_ca_ops stores with WRITE_ONCE() to fix the accompanying KCSAN
data-race issue. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/pai: Handle multiple PMU stop callback invocations
Handle the following scenario:
The kernel protects itself against a very high sampling load and
throttles the sampling using:
perf_event_throttle() --> PMU->stop()
Shortly later the scheduler may terminate the task and removes it from the
CPU. It again calls
PMU->stop()
which results in two invocations of PMU->stop() called back to back.
Protect against this and check the PERF_HES_STOPPED bit on function
entry. If it is already set return.
Clear bit PERF_HES_STOPPED in PMU->start().
Prohibit ioctl(fd, PERF_EVENT_IOC_PERIOD, ...) call for this event.
It sets perf_event::event_limit to a positive value and causes
perf_event_overflow() to invoke pai_stop() call back function when
perf_event::event_limit hits zero. This is not supported because the
sample events CRYPTO_ALL and NNPA_ALL are only taken at schedule out
of a task.
Use list_for_each_entry_safe() for safe iteration over syswide_list
in pai_have_samples(). |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/vmci: validate packet source for connected sockets
vmci_transport_recv_stream_cb() looks up sockets first by the full source
and destination tuple, then by destination only in the bound table. The
fallback can select a non-listening socket without checking whether the
packet came from its stored peer.
This was reproduced with two VMCI contexts. A RST from the context not
stored in a TCP_SYN_SENT socket reset that socket after it was selected by
the destination-only lookup.
VMCI can process notification packets in bottom-half context when the
socket is not owned by user context, or defer packets to a workqueue. Use
vsock_check_source() after taking the socket lock in the bottom-half path,
and recheck after lock_sock() in the workqueue path. Listening sockets
continue to accept packets from any source.
Reply with a RST addressed from the received packet before dropping a
source that fails validation. This preserves the existing reset behavior
for bound non-listening and concurrently closed sockets without directing
the reset to a connected socket's stored peer. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Cope with the SS bit being set in #NPF exit codes
When running Hyper-V from Windows 11, KVM is seeing the SS bit set
in nested page fault error codes produced for shadowed NPT. The AMD
manual is unclear about when SS is set, including whether it can be set
when SupervisorShadowStackEn (bit 6) is not set in the MISC_CTL field
of the VMCB.
Nevertheless, the unexpected SS bit causes out of bounds accesses in
permission_fault(), seen as either WARNs or UBSAN reports:
kernel: UBSAN: array-index-out-of-bounds in arch/x86/kvm/mmu.h:225:27
kernel: index 34 is out of range for type 'u16 [16]'
(in this case, the page fault error code is 34*2=0x44, i.e. SS|U; the
report shows SS|U|W happening as well). Fix the handling of unknown
error codes by dropping SS and (with a WARN) any bits not among those
that permission_fault() expects to receive.
At the same time, given the uncertainty about when hardware sets SS,
follow the processor's behavior when constructing the fault's error
code, and preserve the SS bit as passed to FNAME(walk_addr_generic).
While the behavior is surprising, there's a possibility that Hyper-V
expects it (Hyper-V does not even enable CET unless it finds MBEC/GMET!),
so retain the information when reflecting the fault to L1 instead of
unconditionally discarding it.
Bisection shows that this started happening with commit 687ee95c1b6d ("KVM:
nSVM: enable GMET for guests"), even though SHSTK was available to guests
since Linux 6.18. However, this is not because bit 1 of MISC_CTL (GMET)
somehow enables reporting the SS bit; rather, it's simply that Hyper-V
never uses CET unless GMET is also present. The WARN is reproducible
even with gmet=0, with some hacking of kvm-unit-tests's cet.c testcase
to ensure that the first access to the shadow stack triggers a page fault. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/dmc: Harden DMC firmware payload parsing
Validate the conversion of the DMC firmware size from dwords to bytes
using check_mul_overflow() before calculating the firmware payload size.
Reject zero-length payloads and zero MMIO counts in the DMC firmware
header so malformed firmware is caught early. Also set dmc_fw_size only
after the payload allocation succeeds.
(cherry picked from commit efde6601a1f1daedfe3dcc2816c934ddb44e3eef) |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix heap overflow in cifs_do_set_acl()
cifs_set_acl() validates ACL size using posix_acl_xattr_size():
4 + (count * 8) // 4-byte header + 8 bytes per ACE
cifs_do_set_acl() then calls posix_acl_to_cifs() to write the CIFS
wire format into the same buffer:
6 + (count * 10) // 6-byte header + 10 bytes per ACE
An ACL that passes the xattr-based check in cifs_set_acl() can
overflow the heap when posix_acl_to_cifs() writes the larger CIFS
format.
Validate the CIFS format size against the remaining buffer space and
USHRT_MAX before converting--data_count is __u16, so sizes above
USHRT_MAX truncate the on-wire packet length, causing the server to
apply a partial ACL. Replace MaxDataCount = 1000 with
min(CIFSMaxBufSize, USHRT_MAX). |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix stall when a task enqueued with SCX_ENQ_LAST lands back on its CPU's local DSQ
With SCX_OPS_ENQ_LAST, the last runnable task on a CPU is passed to
ops.enqueue() instead of being kept running. Exiting tasks without
SCX_OPS_ENQ_EXITING, migration disabled tasks without
SCX_OPS_ENQ_MIGRATION_DISABLED and tasks on an offline rq skip ops.enqueue()
and go straight to the local DSQ. This happens in put_prev_task_scx() after
the pick has settled on idle, so nothing reschedules the CPU, which idles
with the task queued until an unrelated wakeup lands on it or the watchdog
fires.
scx_mitosis, which sets SCX_OPS_ENQ_LAST without SCX_OPS_ENQ_EXITING, hit
this during mass cgroup teardown: exiting tasks stuck in exit_mmap() for
over 40 seconds.
A task put on the local DSQ runs, as anywhere else. If the SCX_ENQ_LAST
enqueue left the task on this CPU's local DSQ, set need_resched on the task
being switched in, as proxy_resched_idle() does. resched_curr() would flag
the task being put instead, and __schedule() clears that right after the
pick. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix the bypass dispatch claim for schedulers bypassed by an ancestor
scx_bypass() claims bypass dispatch when the scheduler's depth goes from
zero to one and releases it when the depth returns to zero, but propagates
only the depth to the descendants, not the claim. A descendant that starts
bypassing with its ancestor never claims, and one whose own bypass ends
under the ancestor's keeps its claim, as its depth does not return to zero.
A sub-scheduler enable whose bypass ends under a PM suspend thus leaks its
claim: the parent keeps hosting bypass dispatch and the sub-scheduler's next
bypass trips the WARN_ON_ONCE() on the claim. A sub-scheduler disable that
starts under a PM suspend has no claim, so once the resume lifts the root's
bypass its tasks sit on the parent's bypass DSQs with nobody consuming them.
Claim for every descendant whose depth goes from zero to one in the
propagation and release every scheduler in the subtree whose depth returned
to zero once the tasks have moved out of the bypass DSQs. A parent that is
bypassing itself when a descendant claims consumes only its own bypass DSQs,
empty until it leaves bypass and becomes the host. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: p54: validate firmware record lengths
The p54 firmware parser accesses component ID and component version
records without checking that their lengths cover the fields being read.
A malformed record can therefore make the parser read past the record.
Validate the component ID and component version record lengths before
accessing their data. The descriptor record is also checked against the
shortest descriptor length found in the supported firmware images.
Reject descriptor values that underflow the RX offset or produce an empty
RX range before updating the driver state. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gud: validate GUD_ROTATION_0 is present in supported rotations
The rotation argument to drm_plane_create_rotation_property() is set to
DRM_MODE_ROTATE_0, and the device reported rotation bitmask is used as
the supported_rotations argument. The driver never validates that
GUD_ROTATION_0 is present, so a device that omits it from its
GUD_PROPERTY_ROTATION triggers the
WARN_ON(rotation & ~supported_rotations) in
drm_plane_create_rotation_property()
Fix this by skipping the creation of rotation property if the device
doesn't have the GUD_ROTATION_0 bit |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: propagate reparse index insertion failure
update_reparse_data() ignores the return value of
set_reparse_index(). When index insertion fails, the code removes
the just-written reparse data as cleanup but still returns 0, so
symlink(2) (and WSL special file creation) reports success while
no reparse data exists on disk. When there was no previous reparse
data (oldsize == 0), the failure was likewise silently ignored.
Propagate the error to the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/cirrus-qemu: Validate BAR0 size during probe
The `cirrus-qemu` driver relies on `CIRRUS_VRAM_SIZE` (4 MB) to validate
framebuffer sizes. However, during PCI probe, the driver mapped BAR0
without verifying that its size matches `CIRRUS_VRAM_SIZE`.
If a PCI device with a BAR0 smaller than 4 MB is bound to the driver, the
mapped VRAM will be smaller than expected. Because validation checks assume
4 MB VRAM, framebuffers larger than the mapped memory can be created.
When the display plane is updated (e.g. during release),
`cirrus_primary_plane_helper_atomic_update()` copies the framebuffer to
VRAM using `drm_fb_memcpy()`. Writing past the end of the mapped I/O memory
causes a supervisor write page fault:
BUG: unable to handle page fault for address: ffffc9000389c000
...
RIP: 0010:memcpy_toio+0x7c/0xe0 arch/x86/lib/iomem.c:110
...
Call Trace:
<TASK>
iosys_map_memcpy_to include/linux/iosys-map.h:285 [inline]
drm_fb_memcpy+0x325/0x5d0 drivers/gpu/drm/drm_format_helper.c:442
cirrus_primary_plane_helper_atomic_update+0x98a/0xb00
drivers/gpu/drm/tiny/cirrus-qemu.c:358
drm_atomic_helper_commit_planes+0x626/0xea0
drivers/gpu/drm/drm_atomic_helper.c:3038
drm_atomic_helper_commit_tail+0x60/0x510
drivers/gpu/drm/drm_atomic_helper.c:1989
commit_tail+0x2b1/0x3c0 drivers/gpu/drm/drm_atomic_helper.c:2074
drm_atomic_helper_commit+0xa77/0xb10
drivers/gpu/drm/drm_atomic_helper.c:2312
Fix this by validating in `cirrus_pci_probe()` that the PCI BAR0 resource
is not less than `CIRRUS_VRAM_SIZE`, returning `-ENODEV` if it is less. |
