| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: avs: Fix unbalanced module reference count
strace_open() invokes try_module_get() which on success takes
the module reference. If any follow up operation causes
strace_open() to fail, the refcount shall be put down. |
| Multidict is an implementation of a multidict data structure. From 6.7.0 until 6.9.1, the C extension's items-view reflected union operation, operand | d.items(), in multidict_itemsview_or2_impl and subtraction operation, d.items() - operand, in multidict_itemsview_sub1_impl fail to release new key-identity and value references returned for each operand element. Applications that perform these operations over attacker-influenced sequences can leak two strong references per element, and garbage collection cannot reclaim them, so repeated operations can cause unbounded process memory growth and denial of service. Forward union, intersection, non-tuple operand elements, and pure-Python builds are not affected by this reference leak. This issue is fixed in version 6.9.1. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: msc313e: Fix clock leak and spurious timer in settimeout()
msc313e_wdt_settimeout() unconditionally calls msc313e_wdt_start() which
introduces two severe bugs:
1. If the watchdog is already active, calling start() again will
increase the reference count of the clock again. However stop() is
only called once, the reference count is unbalance.
2. If the watchdog is stopped, calling settimeout() will start
the hardware timer accidentally.
Factor out the register-writing logic into a helper function. Only call
it in settimeout() if the watchdog is running. Otherwise, simply update
`wdev->timeout`. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: pin DFS superblock in iterator callback
tcon_super_cb() stores a raw superblock pointer, but __cifs_get_super()
takes its active reference only after iterate_supers_type() has dropped
s_umount and its passive reference. Concurrent DFS automount expiry can
therefore free the superblock before cifs_sb_active() uses it.
A deterministic KASAN test reproduces the race as:
BUG: KASAN: slab-use-after-free in cifs_sb_active+0x77/0x80
The same test passes with this change applied.
Take the active reference in the callback while iterate_supers_type()
still holds s_umount shared. cifs_put_tcp_super() remains the matching
release. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: avoid leaking refcount in cifs_queue_oplock_break()
cifs_queue_oplock_break() unconditionally takes a reference on the
target file before queueing cifs_oplock_break(). Only that work item
decreases the reference counter again.
If another oplock break arrives while that work is still queued,
queue_work() will return false and not queue this second work item. As a
result, we will never reach the point to drop the file reference again
and are leaking this reference. This can be triggered when interacting
with a slow-responding server.
As a result, later unmount operations for this file system will fail with
BUG: Dentry ... still in use (1) [unmount of cifs cifs]
VFS: Busy inodes after unmount of cifs (cifs)
kernel BUG at fs/super.c:777!
Fix this by only incrementing the reference count if the work has been
queued successfully. Taking it after queue_work() is safe because all
three callers hold tcon->open_file_lock across the call and
_cifsFileInfo_put() decrements under that same lock, so a worker that
starts the handler in the window cannot drop the reference before it has
been taken. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: avoid leaking refcount when cifs_sb_tlink() fails
cifs_oplock_break() takes over the reference that
cifs_queue_oplock_break() acquired when it queued the work, and drops it
with _cifsFileInfo_put() once the break has been processed.
Only in setups with "-o multiuser", cifs_sb_tlink() may fail, at which
point cifs_oplock_break() returns without putting the file reference,
mirroring the reference leak we already fixed in the companion patch to
cifs_queue_oplock_break().
This would trigger a crash due to busy inodes on the next unmount:
BUG: Dentry ... still in use (1) [unmount of cifs cifs]
VFS: Busy inodes after unmount of cifs (cifs)
Drop the reference on that path as well. Doing so before the out label
mirrors the normal path, which also puts the reference before
cifs_done_oplock_break().
Found by Sashiko code review. The failure path was not exercised at
runtime. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: fix node refcount leak on ctrl packet alloc failure
qrtr_send_resume_tx() calls qrtr_node_lookup() which takes a
reference on the returned node. If the subsequent call to
qrtr_alloc_ctrl_packet() fails due to memory allocation failure, the
function returns -ENOMEM without calling qrtr_node_release() to
release the node reference.
Add qrtr_node_release(node) before returning on the allocation failure
path to properly release the reference. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix busy dentry warning on unmount after DIO
Commit c68337442f03 ("cifs: Fix busy dentry used after unmounting") fixed
the issue in cifs where deferred close of a file led to a dentry reference
count not being released in umount, by flushing deferredclose_wq in
cifs_kill_sb() to solve it.
However, the cifs DIO path suffers from the same busy-dentry problem caused
by a delayed dentry reference-count release:
[dio] [cifsd] [close + umount]
netfs_unbuffered_write_iter_locked
...
cifs_demultiplex_thread
netfs_unbuffered_write
cifs_issue_write
netfs_wait_for_in_progress_stream [1]
...
netfs_write_subrequest_terminated
netfs_subreq_clear_in_progress
netfs_wake_collector // wake [1]
netfs_put_subrequest
netfs_put_request
queue_work(system_dfl_wq, xxx) [2]
// dio write return cifs_close
_cifsFileInfo_put
// cfile->count 2->1
--cfile->count [3]
// umount
cifs_kill_sb
kill_anon_super
// warning triggered!
shrink_dcache_for_umount [4]
[system_dfl_wq] [5]
netfs_free_request
...
_cifsFileInfo_put
// cfile->count 1->0
--cfile->count
queue_work(fileinfo_put_wq, xxx)
[fileinfo_put_wq] [6]
cifsFileInfo_put_work
cifsFileInfo_put_final
dput
If the umount path is triggered before [5], it results warning:
BUG: Dentry 00000000eab1f070{i=9a917b66ae404fec,n=test} still in use (1)
[unmount of cifs cifs]
The existing per-inode ictx->io_count wait in cifs_evict_inode() does not
help: it lives in the inode eviction path, which runs after
shrink_dcache_for_umount() has already warned about the busy dentries.
Fix it by adding a per-superblock outstanding-rreq counter that is
incremented in cifs_init_request() and decremented in cifs_free_request().
In cifs_kill_sb(), before kill_anon_super(), wait for this counter to reach
0 - which guarantees that all cleanup_work for this sb have run and thus
all relevant cfile puts are queued on fileinfo_put_wq or serverclose_wq.
Then drain the workqueue so the dentry refs are dropped.
This is a targeted wait, not a flush of the system-wide system_dfl_wq. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/pm: fix SmartShift bias sysfs store PM refcount on parse error
Return the parse error before acquiring PM access. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/amd_node: Fix PCI device reference counting in amd_smn_init()
The local "root" pointer is a temporary variable used during the device
search. Therefore, refcount related to the search iterators should be cleaned
up after the search is complete.
Use the __free() cleanup macro to ensure the refcount is decremented when the
temporary pointer goes out of scope.
Additionally, increment the refcount when caching a root pointer. This ensures
the in-use refcount is separate from the temporary search refcounting.
Finally, drop the redundant "root = NULL" before the second search loop. The
pci_get_class() iterator always decrements the refcount of its "from"
argument, so the first loop can only fall through with "root" already NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: put the "mdio" child node reference on success
macb_mii_init() holds the reference returned by of_get_child_by_name()
for macb_mdiobus_register() and drops it only on the error paths, so
every successful probe leaks a node reference. On a CM5, overlay
removal after four bind cycles reports
OF: ERROR: memory leak, expected refcount 1 instead of 5
Drop the reference after registration, where __mdiobus_register() has
already taken its own for the lifetime of the bus. |
| In NLnetLabs Unbound 1.20.0 up to and including 1.26.0, a vulnerability on the 'serve-expired' code path can cause a double decrement on the 'wait-limit' counter per client IP essentially bypassing one of the counter measures that was introduced for DNSBomb (CVE-2024-33655). A malicious actor can exploit this by controlling an authoritative zone with short TTL, so cached entries expire quickly. Each 'slow' query, one the attacker's authoritative never answers, is followed by one query for an expired cached name, which is answered immediately via the 'serve-expired' path and decrements the counter twice. This second query was named 'pump'. By alternating slow queries and pumps, the attacker keeps the per-client counter at or below the configured 'wait-limit' indefinitely, and can hold an arbitrary number of pending queries from a single source IP, up to the global mesh quota (num-queries-per-thread); eventually bypassing one of the counter measures introduced for DNSBomb (CVE-2024-33655). This vulnerability is present on the 'serve-expired' code path. |
| Tor before 0.4.9.11 is prone to a use-after-free (and potential double free) of a conflux object when a recovery leg revives a conflux set whose last linked leg has already been closed. A malicious exit node could use this to crash a client. This is TROVE-2026-026. |
| In the Linux kernel, the following vulnerability has been resolved:
bus: mhi: ep: Fix device refcount leak in the error path of MHI device creation
mhi_ep_create_device() takes one device reference for the UL channel and
another for the DL channel after allocating the transfer device. These
references are normally released by mhi_ep_destroy_device() before the
device itself is removed.
If dev_set_name() or device_add() fails, the error path currently drops
only one reference. The remaining channel references keep the device
from being released and leave the channels associated with a device that
was never registered.
Route both failures through a common unwind path that drops the DL
channel reference, the UL channel reference, and the initial reference
from device_initialize(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm: Fix drm_crtc_commit leak if signaled when PAGE_FLIP_EVENT is used
Commit 1c6ceeee6ebb ("drm/atomic: Fix memleak on ERESTARTSYS during
non-blocking commits") fixed a very similar issue when the event was
allocated by drm_atomic_helper_setup_commit() itself.
However, if the event is allocated in prepare_signaling(), it will also be
set to NULL in complete_signaling(), which prevents drm_crtc_commit from
being put in __drm_atomic_helper_crtc_destroy_state().
Dropping the reference when the event is set to NULL at
complete_signaling() fixes the leak.
The leak can be reproduced by sending a signal to the thread using
DRM_MODE_PAGE_FLIP_EVENT and using a sw_sync fence to cause the atomic
ioctl to block at drm_atomic_helper_wait_for_fences(). It happened both
with amdgpu and vkms. |
| undici's retry handler can leave an already-exposed response body pending forever. When a server returns a successful response that declares a Content-Length, sends only part of the body, and closes the connection, the retry handler retries the request. If the retry returns a non-retryable status such as 400, the handler forwards that new response downstream and replaces its internal response stream, but the original response body that the application still holds is never ended or destroyed. As a result calls that read that body never settle, and the configured body timeout does not fire because its timer is tied to the connection parser rather than the orphaned body. An attacker-controlled server can trigger this with two short responses without keeping a connection open, and repeated requests accumulate pending promises and streams that can exhaust application concurrency or memory. This affects undici versions from 7.11.0 up to 7.29.1 and from 8.0.0 up to 8.10.2. Users should upgrade to undici 7.29.1 or 8.10.2. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: midi2: remove default configfs groups on teardown
f_midi2_alloc_inst() creates default configfs child groups for the
default endpoint and default block using configfs_add_default_group(),
setting their internal refcount to 1.
However, during function teardown in f_midi2_free_inst() or EP cleanup
in f_midi2_ep_opts_release(), configfs_remove_default_groups() is
never called, therefore never dropping the refcount and leaking struct
f_midi2_ep_opts and f_midi2_block_opts.
Add the missing configfs_remove_default_groups() in the afformentioned
functions to free the structs properly. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-era: fix shadowed superblock leak on take-snap failure
metadata_take_snap() bumps the live superblock refcount and then
dm_tm_shadow_block() allocates a new block for the metadata snapshot.
If the subsequent dm_sm_inc_block() of writeset_tree_root or
era_array_root fails, the function only unlocks the clone and
returns. The newly allocated shadow block is never returned to the
metadata space map, so each failed take-snap permanently leaks one
metadata block.
Free the clone with dm_sm_dec_block() on those error paths, matching
the final step of metadata_drop_snap(). |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: wait for in-flight client TLS handshake callback
xs_tls_handshake_sync() gives xs_tls_handshake_done() a reference to the
lower transport before submitting the handshake request. On timeout or
signal, the synchronous waiter drops that reference after calling
tls_handshake_cancel().
handshake_req_cancel() returns false when handshake_complete() has
already marked the request complete. In that case the completion callback
can still be running, so dropping the callback-owned reference in the
waiter can free the lower transport before xs_tls_handshake_done() stores
xprt_err or drops its own reference.
If cancellation loses to completion, wait until xs_tls_handshake_done()
signals handshake_done and let the callback release its reference. This
mirrors the server-side handshake lifetime handling and keeps the timeout
or signal return value unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix socket refcount leak in smc_switch_conns()
smc_switch_conns() takes a reference on the SMC socket before dropping
lgr->conns_lock, so the connection stays alive while the CDC slot is
fetched:
sock_hold(&smc->sk);
read_unlock_bh(&lgr->conns_lock);
/* pre-fetch buffer outside of send_lock, might sleep */
rc = smc_cdc_get_free_slot(conn, to_lnk, &wr_buf, NULL, &pend);
if (rc)
goto err_out;
The err_out label only drops the wr_tx link reference, so this early exit
returns without the matching sock_put(). The second error exit is not
affected, because sock_put() has already run by then.
A leaked sk_refcnt means the smc_sock is never destroyed. Its send and
receive buffers stay allocated, and for a user socket the reference held
on the network namespace is never released, so the netns can no longer be
torn down.
smc_cdc_get_free_slot() fails when the target link goes down or when the
connection has been killed while the switch is in progress. Both are
reachable during the link failover this function implements, so the leak
is triggered by the same hardware events that make smc_switch_conns() run
in the first place.
Restructure so there is a single sock_put() covering both outcomes,
instead of adding a second one to the error path. |
