| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xen/netfront: don't leak the skb when xennet_fill_frags() fails
When a response chain has more slots than fit in the skb's frags,
xennet_fill_frags() returns an error and xennet_poll() jumps to its
error path. That path moves what's left on tmpq to errq to be freed,
but the skb being filled was already dequeued from tmpq, so it's never
freed. Each chain that overflows leaks the skb and the pages attached
to it as frags, and the backend decides how many slots it sends.
Put the skb back on tmpq before taking the error path, like the
xennet_set_skb_gso() failure just above it does. |
| Open WebUI 0.11.0 before 0.11.4 compiles user-chosen grep patterns for its knowledge and chat file search tools with a regex engine that expands nested counted repetition unbounded at compile time and caches the result. Authenticated users can have the model call grep_knowledge_files with short nested-repetition patterns, blocking the event loop and exhausting worker memory. |
| libexpat through 2.9.0 contains a denial of service vulnerability because billion laughs protection in accountingDiffTolerated() in xmlparse.c detects entity amplification too late. Attackers can supply a moderately sized XML document with a large DTD and nested entity expansions to consume tens of seconds of CPU per parse. |
| MessagePack is the serializer implementation for Python msgpack.org. Prior to 1.2.3, the msgpack-python C extension (msgpack._cmsgpack) leaks a decoded map value when deserialization rejects a key with strict_map_key=True (the default). Repeated malformed inputs can cause unbounded process memory growth and denial of service in applications that deserialize attacker-controlled MessagePack data. Both unpackb() and the streaming Unpacker API are affected. The pure-Python fallback does not exhibit this leak in the reported tests. This issue is fixed in version 1.2.3. |
| There is a command injection vulnerability in the PAPI protocol (Aruba's access point management protocol) of AOS-8 that could lead to unauthenticated remote code execution by sending specially crafted packets to the affected UDP port. Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system. |
| Command injection vulnerabilities in the affected interface of AOS-8 could allow an authenticated remote attacker with high privileges to perform command injection. Successful exploitation could allow an attacker to execute commands with the privileges of the impacted mechanism on the underlying operating system. |
| Vulnerability in Oracle Java SE (component: Networking). The supported version that is affected is Oracle Java SE: 27. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Java SE. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 3.7 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L). |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: Sound). Supported versions that are affected are Oracle Java SE: 8u503, 8u503-perf, 11.0.32.1, 17.0.20.1, 21.0.12.1, 25.0.4.1, 27; Oracle GraalVM for JDK: 17.0.20.1 and 21.0.12.1; Oracle GraalVM Enterprise Edition: 21.3.19.1.1. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability does not apply to Java deployments, typically in servers, that load and run only trusted code (e.g., code installed by an administrator). CVSS 3.1 Base Score 3.1 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:N/I:N/A:L). |
| Nezha 1.0.0 before 2.3.15 contains a memory exhaustion vulnerability in the dashboard file manager WebSocket endpoint because fmStream never calls SetReadLimit, leaving message size unbounded. Authenticated users with file manager scopes can send one oversized binary message to /api/v1/ws/file/:id, triggering an OOM kill that drops all agent monitoring. |
| Improper neutralization of special elements used in a command ('command injection') in Windows Update allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: check a recursive bind mount for mount namespace loops
do_loopback() refuses to bind mount the file of a mount namespace that
is as old as the caller's or older because a mount namespace that holds
a mount of its own file, or of an ancestor's, would cause a cycle. But
it only checks the dentry the bind mount starts from. With MS_REC
everything below it is copied and do_loopback() passes
CL_COPY_MNT_NS_FILE so mount namespace files below the source are
copied.
That's fine for a source in the caller's own mount namespace. Every
mount namespace file in there passed the same check when it was
bind-mounted. It isn't fine for a source in another mount namespace.
may_copy_tree() accepts a bind mount of any nsfs or pidfs file no matter
what mount namespace it lives in so that /proc/<pid>/ns/<ns> and pidfds
can be bind mounted. If we create a bind-mount stack of mount namespaces
file descriptors the kernel will copy them irrespective of their
ancestoral relationship to the mount namespace in question:
151 146 0:7 net:[4026531833] /tmp/nrc/y rw - nsfs nsfs rw
152 151 0:7 mnt:[4026532293] /tmp/nrc/y rw - nsfs nsfs rw
Mount 152 is a mount of the mount namespace file of mount namespace
4026532293 inside mount namespace 4026532293. That namespace and every
mount in it are leaked... All it takes is a process in an older mount
namespace that stacks the file and repeating it leaks without limit:
after control: Shmem: 380 kB
child: mount(/proc/self/fd/6, MS_BIND|MS_REC): ok
after cycle: Shmem: 65916 kB
do_move_mount() runs check_for_nsfs_mounts() over a detached tree for
exactly that reason. Do the same for the copy before it is grafted. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd: yc: fix memory leak in acp6x_pdm_dma_close()
acp6x_pdm_dma_close() does not free the runtime->private_data buffer
allocated in acp6x_pdm_dma_open(). Add the missing kfree. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix ACP MFD device leak on init failure
acp_hw_init() registers ACP child devices with mfd_add_devices() before
attaching them to the ACP power domain and initializing the hardware.
If attaching a child to the power domain fails, or if the ACP reset or
clock enable operation times out, the failure path frees only the
source cell, resource, and platform-data allocations. The child
platform devices already registered by mfd_add_devices() remain
registered and are never released.
Remove the children from the power domain and unregister the MFD
devices on failures that occur after mfd_add_devices() succeeds. Keep
mfd_add_devices() failures on the existing cleanup path since the MFD
core already rolls back partially registered children itself.
The issue was identified by a static analysis tool I developed and
confirmed by manual review.
(cherry picked from commit 63da68d6a2279ec945581c990c5a59a5ae8b5560) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix IP instance memory leak on kobject add failure
amdgpu_discovery_sysfs_ips() allocates ip_hw_instance with
kzalloc_flex() and initializes its embedded kobject before calling
kobject_add().
If kobject_add() fails, the return value is ignored and execution
continues without dropping the initial kobject reference. The failed
kobject is not retained in the kset list, so the normal sysfs teardown
path cannot find it. As a result, ip_hw_instance_release() is never
called and the ip_hw_instance allocation is leaked.
Call kobject_put() when kobject_add() fails so the initial reference is
dropped and ip_hw_instance_release() can free the allocation. Keep the
existing best-effort sysfs behavior by continuing with the remaining IP
entries after the failed registration.
The issue was identified by a static analysis tool I developed and
confirmed by manual review.
(cherry picked from commit 5c75fbcca8af1096d8d9415b91d8ea6212c22ee1) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx6: fix firmware leak on teardown
The firmware requested in gfx_v6_0_init_microcode() is not released
when the GFX block is torn down, leaking the firmware resources.
Add gfx_v6_0_free_microcode() and call it from gfx_v6_0_sw_fini()
to release the PFP, ME, CE and RLC firmware.
(cherry picked from commit 386e81346f95ab0be5a82c5535de932e7a456924) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: disable rx napi when removing device
Unloading the mt7915e module with a MT7916 triggers multiples WARN in
__netif_napi_del_locked() and in page_pool_disable_direct_recycling()
because the driver does not disable the napi before destroying it.
This is troublesome since on MT7916 it is required to unload the module
and reinsert it with a different enable_6ghz parameter to change the
frequency. The system generally becomes unstable after reinserting the
module.
Fix it by disabling rx napi inside mt7915e itself, even through napi rx is
enabled in the mt76 generic code. Disabling it in the mt76 generic code
was previously attempted and reverted because napi was disabled too
late and rx handlers could access freed structures. Note that the tx
side is enabled and disabled by the mt76 generic code.
It is disabled in mt7915_stop_hardware() since, unlike
mt7915_unregister_device(), is it also called in the probe path if an
error happens after rx napi is enabled. |
| IBM MQ 9.4.5.0 through 9.4.5.1 could allow an authenticated user to cause a denial of service by sending a specially crafted message that crashes consuming applications. |
| Pillow is a Python imaging library. From 5.1.0 until 13.0.0, Pillow's PdfParser.get_value() can recurse without a limit while reading nested PDF objects. The parser follows attacker-controlled arrays and dictionaries when an existing PDF is opened for append. An attacker can provide a deeply nested PDF to an application that saves an image with PDF append enabled. This can raise an uncaught RecursionError or terminate the worker, causing denial of service. This issue is fixed in version 13.0.0. |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: spectrum_flower: Fix port range register leak in tmplt_create()
mlxsw_sp_flower_tmplt_create() parses a flow_cls_offload template
into a stack-local struct mlxsw_sp_acl_rule_info purely to compute
rulei.values.elusage. Parsing can acquire port range registers via
mlxsw_sp_flower_parse_ports_range(), but since this rulei never goes
through mlxsw_sp_acl_rulei_destroy(), those registers were never
released, including through chain template deletion.
Factor out of mlxsw_sp_acl_rulei_destroy() the code to actually
release the necessary resources and call from
mlxsw_sp_flower_tmplt_create() to plug the leak.
The issue was found during a review of Wentao Liang's patch referenced
below. |
| pupnp is an SDK for development of UPnP device and control point applications. Prior to 2.0.2, Transfer-Encoding: chunked causes the HTTP parser in upnp/src/genlib/net/http/httpparser.c to leave parser->content_length at zero while parser_parse_chunky_entity and parser_parse_chunky_body accumulate decoded bytes in parser->msg.entity. The g_maxContentLength checks in http_RecvMessage in upnp/src/genlib/net/http/httpreadwrite.c therefore reject oversized numeric Content-Length bodies but do not enforce the same limit on decoded chunked bodies. A remote peer that can reach a SOAP, GENA, miniserver, or control-point HTTP response path can make the process buffer an entity larger than the configured maximum, causing resource exhaustion and denial of service. This issue is fixed in 2.0.2. |
