| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A signature verification vulnerability was discovered in the update installation functionality due to inconsistent validation of the update bundle contents. An attacker with administrative privileges can remotely supply a crafted update bundle that passes signature verification but runs an unsigned script when the bundle is installed. The script runs with root privileges, allowing the attacker to read or modify sensitive data, change the appliance configuration, or shut down the appliance. |
| A flaw was found in dnsmasq. When following a CNAME in a DNS response, the resolver can cache records for the CNAME target without checking that those records belong to the responding server's authorized zone. In split-DNS deployments that send some domains to a specific upstream, an attacker who controls that upstream can inject cache entries for unrelated names. Later clients may then receive attacker-chosen addresses for those names. |
| AnkiMCP is an Anki addon that implements an MCP server, enabling AI assistants to interact with the Anki flashcard application. Prior to version 0.21.0, `anki_mcp_server/mcp_server.py` globally disables FastMCP DNS-rebinding protection through `TransportSecuritySettings` with `enable_dns_rebinding_protection=False`, including for the default local Streamable HTTP listener. The defaults in `anki_mcp_server/config.py` enable `http_enabled` on `127.0.0.1:3141`, with an empty `http_path` selecting the root endpoint. No bearer token, API key, session secret, strict `Host` allowlist or strict `Origin` allowlist is enforced before `initialize`, `tools/list` and `tools/call` reach MCP dispatch. A victim who visits a malicious web page while Anki and the listener are running can have browser requests rebound to loopback, allowing the attacker to `initialize` MCP, enumerate tools, read the local collection, and perform enabled non-destructive note/deck creation or updates. The attacker needs neither LAN position nor a local process. Available operations depend on enabled tool filters; destructive tools are hidden unless `enabled_destructive_tools` is opted into, limiting deletion-level impact but not the exposed read/write operations. The reported harness confirms real MCP tool dispatch with substituted Anki bridge responses rather than demonstrating destructive changes to a real collection. Disabling protection for tunnels/proxies also disables it for the normal loopback configuration. This issue is fixed in version 0.21.0. |
| Sensitive information disclosure and manipulation due to improper token validation. The following products are affected: Acronis Cyber Protect 17 (Linux, Windows) before build 42587. |
| Sensitive information disclosure and manipulation due to improper token validation. The following products are affected: Acronis Cyber Protect 17 (Linux, Windows) before build 42587. |
| Authlib is a Python library which builds OAuth and OpenID Connect servers. From 1.3.1 until 1.9.0, OctKey.import_key() checks asymmetric-key markers only at byte zero while Authlib's PEM loaders accept leading whitespace, comments, or a byte-order mark. In deployments that use the documented mixed algorithm registry and already configure verification with PEM or certificate bytes containing such a prefix, an unauthenticated attacker who knows those same public-key bytes can use them as an HMAC secret and forge HS256 tokens with arbitrary identity or authorization claims. This is a bypass of the remediation for CVE-2024-37568. The module-level jwt object reaches OctKey.import_key() in authlib/jose/rfc7518/oct_key.py, where POSSIBLE_UNSAFE_KEYS fails to identify prefixed asymmetric key material. This issue is fixed in version 1.9.0. |
| Bucket Squatting in Google Cloud Run MCP versions prior to 1.11.0 on Google Cloud Platform allows an attacker to intercept and access proprietary source code, execute arbitrary code and exfiltrate data.
Users must upgrade to Cloud Run MCP version 1.11.0 or later. |
| In `github.com/eclipse-keypont/crypto11/v2` versions `>= 2.0.0-rc3, <= 2.0.0-rc8`, the ML-KEM key-pair lookup functions (`FindMLKEMKeyPair`, `FindMLKEMKeyPairs`, `FindMLKEMKeyPairsWithAttributes`) locate the public half of an ML-KEM key pair by `CKA_ID`/`CKA_LABEL` and never verify it against the private key. In addition, the "ID only" fallback search runs even when the private key has no `CKA_ID`, so the search template reduces to the public-key class and the ML-KEM key type and the first ML-KEM public key on the token is returned. `Encapsulate()` on the resulting key pair encrypts the fresh shared secret to that key, so its owner — not the holder of the private key the caller looked up — can recover the secret. An attacker who can open an unauthenticated session on the token and plant a public `CKK_ML_KEM` object carrying the victim's `CKA_ID`/`CKA_LABEL` receives the shared secrets for encapsulations performed through the substituted key pair, compromising the confidentiality of those secrets and of everything protected by keys derived from them. The v1 module paths have no ML-KEM support and are not affected. |
| A vulnerability allowing an unauthenticated attacker to bypass REST API authentication with a forged federation token and receive responses from REST API endpoints that do not call the Veeam Backup for Microsoft 365 backup service. |
| The BitPay Gateway for WooCommerce WordPress plugin through 4.1.3 does not bind the payment provider's transaction confirmation to the order it completes, nor verify the confirmed amount, allowing an unauthenticated attacker who holds a single genuine low-value transaction to mark arbitrary higher-value orders as paid. |
| The Sadad QA Payment WordPress plugin through 1.28 does not correctly verify the authenticity of incoming payment notifications, as the verification is keyed on a merchant secret that is empty by default and the rest of the signed data is attacker-controlled, allowing unauthenticated attackers to forge a valid confirmation and mark orders as paid without payment. |
| A Kafka broker that authenticates clients with SASL/OAUTHBEARER using the bundled JWKS-backed validator always verifies the JWT signature, but two further checks are only performed when explicitly configured:
- The issuer (iss) claim is verified only when sasl.oauthbearer.expected.issuer is set. When it is unset, a validly-signed token carrying the expected audience is accepted regardless of which issuer minted it.
- An audience (aud) claim is required only when sasl.oauthbearer.expected.audience is set. When it is unset, a validly-signed token that omits the aud claim is accepted. (A token that carries an aud claim is
still rejected when no expected audience is configured.)
Both options default to unset and have been documented as optional (Importance LOW) since KIP-768 (3.1.0).
Impact:
The exposure is realizable mainly in deployments whose JWKS endpoint serves signing keys for more than one issuer (a multi-tenant identity provider, an aggregated/shared JWKS, or shared signing keys): a token
minted for a different issuer, or a token lacking an audience, may be accepted to authenticate — potentially as a higher-privileged principal. In a single-issuer deployment where the provider controls the iss
claim and issues audience-scoped tokens, exposure is limited. The signature trust anchor remains enforced in all cases. This is distinct from CVE-2026-33557 (acceptance of unsigned/unvalidated tokens); here the
signature is validated and only the issuer/audience checks are not enforced by default.
Mitigation (all affected versions, no upgrade required):
Set both sasl.oauthbearer.expected.issuer (to your provider's exact iss value) and sasl.oauthbearer.expected.audience (to the audience(s) your brokers expect), per listener. Brokers that set these perform
exact-match issuer/audience checks and are not affected. Both have been available since 3.1.0.
Resolution:
- From Apache Kafka 4.4.0: a broker configured with a JWKS endpoint fails to start unless both sasl.oauthbearer.expected.issuer and sasl.oauthbearer.expected.audience are set (secure by default). Deployments that
intentionally do not restrict the issuer and/or audience may opt out per axis with sasl.oauthbearer.allow.unverified.issuer=true and/or sasl.oauthbearer.allow.unverified.audience=true. |
| A Kafka broker using SASL/OAUTHBEARER with the default validator (sasl.oauthbearer.jwt.validator.class=DefaultJwtValidator) selects its implementation from configuration. When sasl.oauthbearer.jwks.endpoint.url is set, the validator verifies the JWT signature. When that URL is unset (the default) and no verification key resolver is supplied, DefaultJwtValidator silently falls back to ClientJwtValidator, which does not verify the JWT signature, algorithm, or issuer - and the broker starts with no warning or error. This is the residual of CVE-2026-33557, whose fix restored signature verification only on the path where the JWKS endpoint URL is set.
Impact:
A broker in this state accepts any structurally valid JWT, including "alg":"none" tokens. An unauthenticated remote attacker who can reach the listener can forge a token asserting any principal - including configured superusers - and gain full access to the cluster. Only brokers that enable SASL/OAUTHBEARER validation without a JWKS endpoint URL (and without a custom verification key resolver) are affected; brokers that set the URL verify signatures and are not affected. Unlike CVE-2026-110952 (issuer/audience not enforced by default), here no signature is verified at all.
Mitigation (all affected versions, no upgrade required):
Set sasl.oauthbearer.jwks.endpoint.url for every listener/mechanism that uses OAuthBearerValidatorCallbackHandler, or configure a signature-verifying sasl.oauthbearer.jwt.validator.class.
Resolution:
From Apache Kafka 4.2.2, 4.3.1, and 4.4.0: a broker that would fall back to the non-verifying ClientJwtValidator fails to start with a ConfigException instead of running without signature verification (secure by default). |
| An Insufficient Verification of Data Authenticity vulnerability in PCLI in Juniper Networks Session Smart Router and Session Smart Conductor allows an attacker with write access to the model cache directory to execute arbitrary code and escalate privileges via the processing of unverified cache files. |
| mews/pos through 2.0.0 contains an insufficient verification of data authenticity vulnerability that allows unauthenticated attackers to forge payment results by submitting unverified callbacks. GarantiPos, PayForPos and InterPos 3D Pay and 3D Host handlers skip check3DHash(), letting attackers post tampered status, amount or order ID fields to complete orders without paying. |
| Echo is a Go web framework. Prior to 4.16.0 and 5.4.0, Context.Scheme unconditionally trusts forwarded scheme headers from any client. A client that reaches Echo directly over plaintext HTTP can claim an HTTPS scheme and bypass HTTPSRedirect because the request is treated as already secure. Separately, behind a TLS-terminating proxy that passes an attacker-controlled header, a claimed HTTP scheme can suppress the Strict-Transport-Security header even though the browser receives the response over HTTPS. The practical risk is reduced when a trusted proxy overwrites the headers and direct backend access is prevented, but the framework previously had no trusted-source configuration for this decision. This issue is fixed in 4.16.0 and 5.4.0. |
| The TiendaCrypto para WooCommerce WordPress plugin through 1.2.1 does not correctly verify the authenticity of its payment webhook, validating the request signature against a key that is always empty, which allows unauthenticated attackers to forge webhook notifications and mark arbitrary WooCommerce orders as paid on web servers that preserve request header case. |
| Discourse ActivityPub adds ActivityPub support to Discourse. Prior to commit 1c8518b0f2abdf31cbea3e0b242f74d8994a9ba5, inbound ActivityPub processing does not sufficiently verify that the actor authenticated by the signed request matches the Activity actor and owns the referenced federated post. A remote attacker can exploit these missing identity and ownership checks to edit, delete, or reply to federated posts without the required permissions. This vulnerability is fixed with commit 1c8518b0f2abdf31cbea3e0b242f74d8994a9ba5. |
| Echo is a Go web framework. From 4.0.0 until 5.4.0, the Proxy middleware can preserve an attacker-supplied X-Real-IP header and forward it to an upstream service when Echo.IPExtractor is not configured. A remote client can therefore make upstream services receive a spoofed client address, undermining IP-based access controls, rate limiting, audit logging, or geographic restrictions that trust Echo's forwarded identity. This issue is fixed in Echo 5.4.0. |
| Echo is a Go web framework. From 5.0.0 until 5.4.1, Echo v5's ExtractIPFromRealIPHeader validates whether the client-supplied X-Real-IP value belongs to a trusted range instead of validating the direct network peer. A client reaching Echo directly, or through a proxy that preserves the header, can supply a loopback or private address and have Context.RealIP return that spoofed identity. Applications using the extractor for IP allowlists, rate limiting, audit logs, or forwarding headers can consequently trust an attacker-controlled address; the default direct extractor and Echo v4 are unaffected. This issue is fixed in 5.4.1. |
