| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Memory allocation with excessive size value in the HSS/LMS signature code (HssPublicKeyParameters, HssSignature) in Legion of the Bouncy Castle Inc. bc-csharp before 2.7.0 allows a remote unauthenticated attacker who can supply both an HSS public key and a signature to cause a denial of service through memory exhaustion via a public key encoding with an excessive level count, because the level count L read when parsing an HSS public key was not checked against the RFC 8554 maximum of 8, and signature parsing then allocated an array of L - 1 entries before reading any further signature data. A single verification can commit up to about 17 GB of memory or fail with an OutOfMemoryException. |
| Memory allocation with excessive size value in the OpenPGP signature and user attribute subpacket parsers (SignatureSubpacketsParser.ReadPacket, UserAttributeSubpacketsParser.ReadPacket) in Legion of the Bouncy Castle Inc. bc-csharp before 2.7.0 allows a remote, unauthenticated attacker who can supply a crafted OpenPGP public key, certificate or signature to cause a denial of service (OutOfMemoryException or memory exhaustion in the parsing process) via a subpacket header using the five-octet length form, because the declared length was used to size the subpacket buffer with no upper bound and without being compared with the size of the enclosing subpacket area or packet, so a few bytes of input could demand an allocation of up to about 2 GB before any subpacket data was read. |
| In Progress® Telerik® Document Processing Libraries prior to version 2026.3.1027, uncontrolled recursion, infinite loop, inefficient algorithmic complexity and resource allocation vulnerabilities in RadPdfProcessing and AI document summarization and question answering allow an unauthenticated attacker to terminate or hang the host process via a crafted PDF document or document text submitted for summarization or question answering. |
| The asynchronous Smile parser (NonBlockingByteArrayParser) uses a raw-binary length prefix taken from untrusted input to allocate a byte[] before the body is read, with no upper bound and no overflow check. On the raw-binary marker 0xFD, _decodeVInt() computes (value << 6) + (i & 0x3F) without the (value >>> 25) != 0 overflow guard present in the blocking SmileParser._readUnsignedVInt, and _startRawBinary then allocates the declared length immediately.
A Smile feed of roughly ten bytes can therefore force an eager allocation of approximately 2 GB, producing an OutOfMemoryError on reactive or asynchronous Smile endpoints. A VInt crafted to overflow int yields a negative length and a NegativeArraySizeException, a RuntimeException that is not a JacksonException and so escapes the parser contract. Either outcome crashes the request or processing thread.
This is the same class of issue as CVE-2020-28491 in the CBOR parser of this library, which was fixed with a LONGEST_NON_CHUNKED_BINARY guard; the asynchronous Smile parser never received the equivalent guard. No privileges or user interaction beyond the ability to submit data for parsing are required. |
| Pillow is a Python imaging library. From 8.1.0 until 13.0.0, Pillow can allocate an APNG disposal background at the full canvas size before applying the decompression-bomb check. A crafted APNG with a small first frame, a very large declared canvas, and background disposal or first-frame OP_PREVIOUS reaches PngImageFile._seek while Image.open() positions frame zero. The full-canvas allocation occurs inside Image.open() without requiring pixel loading or frame iteration. This can exhaust memory and deny service. This issue is fixed in version 13.0.0. |
| Memory allocation with excessive size value in the DTLS handshake reassembly (DtlsReliableHandshake, DtlsReassembler) in Legion of the Bouncy Castle Inc. bc-csharp before 2.7.0 allows a remote unauthenticated DTLS peer to cause a denial of service through memory exhaustion via crafted handshake message fragments, because the reassembly buffer for each incoming handshake message was allocated at the 24-bit length declared in the fragment header, without the check against the peer's maximum handshake message size that TLS already applied. A fragment carrying no payload can force an allocation of almost 16 MB, for each of up to 16 pending messages per handshake, before the handshake is authenticated. DTLS servers and DTLS clients are both affected; TLS is not. |
| zip is a zip library for Rust that supports reading and writing simple ZIP files. From 1.3.0 until 9.0.0, ZipArchive::extract in src/read/mod.rs calls Vec::with_capacity for a symbolic link target using the attacker-controlled ZIP64 uncompressed_size before reading entry data. A small archive can request an impossible capacity, causing the infallible allocation path to abort the process before the entry is validated. The failure cannot be contained with catch_unwind or a worker thread, allowing repeated denial of service in archive-processing applications. This issue is fixed in version 9.0.0. |
| Open Neural Network Exchange (ONNX) is an open standard for machine learning interoperability. Prior to 1.22.0, _unpack_2bit() and _unpack_4bit() resize unpacked arrays according to attacker-controlled TensorProto.dims without verifying that raw_data or int32_data encodes the declared number of elements. Materializing an untrusted UINT2, INT2, UINT4, INT4, or FLOAT4E2M1 tensor through onnx.numpy_helper.to_array() or onnx.reference.ReferenceEvaluator can therefore expand a small packed payload into a disproportionately large allocation and exhaust memory. This issue is fixed in version 1.22.0. |
| zip is a zip library for Rust that supports reading and writing simple ZIP files. From 5.1.0 until 9.0.0, applications built with the legacy-zip feature can reserve output capacity from an attacker-controlled ZIP64 uncompressed size before validating the compressed stream. The ShrinkDecoder path in src/legacy/shrink.rs can panic with a capacity overflow during ZipArchive::extract, and the Reduce and Implode decoders contain the same unbounded preallocation pattern. An unhandled panic can terminate an archive-processing service. This issue is fixed in version 9.0.0. |
| Mattermost versions 11.9.x <= 11.9.1, 11.8.x <= 11.8.5, 11.7.x <= 11.7.10, 11.10.x <= 11.10.1 Mattermost fail to apply allocation limits to the byte-string decode paths in its WebSocket msgpack decoder, which allows an authenticated remote attacker to cause excessive server memory allocation via a crafted binary WebSocket frame declaring a Bin32 payload length of up to 4,294,967,295 bytes.. Mattermost Advisory ID: MMSA-2026-00768 |
| **UNSUPPORTED WHEN ASSIGNED** Unbounded allocation in XML parsing in Apache Vysper; all versions, may lead to an out of memory condition.
This issue affects all versions of Apache Vysper. Apache Vysper is an XMPP (Jabber) server library.
As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative. |
| HTTP::Server::PSGI versions before 1.0056 for Perl allow a single request to crash the server by declaring a large Content-Length.
The request body is read with sysread() calls sized by the remaining Content-Length. Perl grows the read buffer to the requested length before any data arrives, so the server tries to allocate as much memory as the client declares.
A remote attacker can send one request with a large Content-Length and a few body bytes, and perl exits with an out-of-memory error before the application is called. HTTP::Server::PSGI runs as a single process, so the server stays down until restarted. |
| A vulnerability was identified in smg-project smg 1.7.0/1.8.0/1.9.0/1.10.0/1.10.1. Affected is the function jpeg_turbo::decode_jpeg_rgb of the file crates/multimodal/src/jpeg_turbo.rs of the component llm-multimodal. The manipulation leads to uncontrolled memory allocation. The attack can be initiated remotely. The exploit is publicly available and might be used. Upgrading to version 1.11.0 is able to address this issue. The identifier of the patch is 8f51b57e219a914089e345b704c3c8de37a3bb8e. It is advisable to upgrade the affected component. |
| Web::Simple versions before 0.035 for Perl allocate a buffer sized by the Content-Length header for urlencoded body parameters.
Web::Dispatch::ParamParser::get_unpacked_body_from reads an application/x-www-form-urlencoded body using a single read call, with no cap and the return value ignored. Perl's read grows the buffer to the requested length before reading, so the declared Content-Length determines the allocation.
An attacker can trigger this through any route whose dispatch specification has a % body-parameter match, such as sub (POST + %name=), sending a Content-Length far larger than the body actually sent. No authentication is involved. |
| ImageSharp is a 2D graphics library. From 1.0.0-beta0001 until 4.1.2, ICC CLUT parsing calculates allocation sizes from attacker-declared channel and grid dimensions before confirming that the profile contains the declared values. IccDataReader.ReadClutF32 can request a large float array, and earlier public IccProfile.Entries parsing paths can allocate a large jagged representation, from a short truncated profile. In version 4, automatic image conversion reaches the parser when DecoderOptions.ColorProfileHandling is Convert; the default Preserve mode avoids that conversion path. The demonstrated impact is memory pressure and input-validation failure, not unhandled process termination. This issue is fixed in version 4.1.2. |
| Ghidra through 12.2 contains an uncontrolled memory allocation vulnerability in BinaryField.read() that allows attackers to exhaust heap memory via an unchecked 32-bit length field. Attackers can persuade users to import a crafted GZF packed database file, triggering an OutOfMemoryError in PackedDatabase.open() that aborts the import and denies service. |
| Memory allocation with excessive size value in the MQTT 3.1.1 compatibility adapter in AWS aws-c-mqtt before 0.16.2 might allow a remote actor to cause a denial of service of the client application.
To remediate this issue, users should upgrade to aws-c-mqtt 0.16.2 or later, or to an AWS Common Runtime or AWS IoT Device SDK release that bundles it. |
| A flaw was found in Wildfly. A remote unauthenticated attacker can trigger OutOfMemoryError as CSIv2Util's GSS token decoder reads an attacker-controlled length field without bounds checking and attempts to allocate a byte array of that size. |
| PhpSpreadsheet is a pure PHP library for reading and writing spreadsheet files. Prior to 1.30.7, 2.1.19, 2.4.8, 3.10.8, and 5.10.0, Ods::processTableRow in src/PhpSpreadsheet/Reader/Ods.php accepts an unbounded table:number-rows-repeated attribute from an ODS table row. When the row contains a value, the reader materializes a cell for every repetition without checking the spreadsheet row limit, so a small attacker-controlled ODS file can consume substantial CPU and memory and terminate the PHP worker. Column repetition is separately bounded and is not part of this vulnerability. This issue is fixed in versions 1.30.7, 2.1.19, 2.4.8, 3.10.8, and 5.10.0. |
| The RTMP AMF parser in Apache bRPC accepts AMF string lengths and array counts directly from untrusted input. A remote unauthenticated attacker who can reach a bRPC server with RTMP enabled can send a small AMF payload with an excessive declared long string length or array count, causing excessive memory allocation or resource consumption before the parser rejects the incomplete payload.
Root Cause:
The AMF long string parser resized the destination string to the declared 32-bit length before validating that the stream contained that many bytes. ECMA array and strict array parsers also accepted 32-bit element counts without a configurable upper bound.
Affected Scenarios:
Deployments that enable the bRPC RTMP server component and accept RTMP traffic from untrusted clients. Direct uses of the AMF parser on untrusted data are also affected.
How to Fix:
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3353
Note:
The fix introduces configurable AMF parsing limits. The default maximum string size is 64 MiB and the default maximum array element count is 1,048,576. Payloads above these limits are rejected. The limits can be adjusted with amf_max_string_size and amf_max_array_size. |
