| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Loop with unreachable exit condition in the PKCS#12 key derivation (Pkcs12ParametersGenerator) in Legion of the Bouncy Castle Inc. bc-csharp before 2.7.0 allows an attacker who can supply a PKCS#12 (PFX) file, or a PKCS#8 encrypted private key that uses a PKCS#12 password-based encryption algorithm, to cause a denial of service through CPU exhaustion via an iteration count of zero or below, because the derivation loop ran until its counter equalled the count, so for such a count it wrapped through about 2^32 iterations before the MAC or the password could be checked. A 75-byte PFX file with a negative MacData iteration count kept Pkcs12Store.Load busy for many minutes. |
| ApostropheCMS is an open-source Node.js content management system. In sanitize-html 2.18.0, when an <iframe> is not allowed and disallowedTagsMode is 'discard' (the defaults), its raw-text content is re-sanitized by a recursive call to sanitizeHtml(text, options). The recursion has no bound and starts each nested call with a fresh state. This vulnerability is fixed in 2.18.1. |
| Loop with unreachable exit condition in Pkcs12Store.GetCertificateChain in Legion of the Bouncy Castle Inc. bc-csharp before 2.7.0 allows an attacker who can supply a crafted PKCS#12 file to an application that loads it and requests a key entry's certificate chain to cause a denial of service, in which the call never returns and consumes CPU and memory until an OutOfMemoryException, via certificates whose issuer links form a cycle, for example two certificates whose AuthorityKeyIdentifier extensions each identify the other's public key. This happens because the chain-building loop stops only when no issuer is found or a certificate links to itself, and keeps no record of certificates already visited. The key-identifier links are followed without checking signatures. |
| In Progress® Telerik® Document Processing Libraries prior to version 2026.3.1027, uncontrolled recursion, infinite loop, unchecked loop condition and inefficient regular expression vulnerabilities in RadSpreadProcessing and RadSpreadStreamProcessing allow an unauthenticated attacker to terminate or hang the host process via a crafted XLSX or XLS workbook or formula. |
| In Progress® Telerik® Document Processing Libraries prior to version 2026.3.1027, uncontrolled recursion, infinite loop, inefficient algorithmic complexity and resource allocation vulnerabilities in RadPdfProcessing and AI document summarization and question answering allow an unauthenticated attacker to terminate or hang the host process via a crafted PDF document or document text submitted for summarization or question answering. |
| In Progress® Telerik® Document Processing Libraries prior to version 2026.3.1027, uncontrolled recursion, inefficient algorithmic complexity and infinite loop vulnerabilities in RadWordsProcessing allow an unauthenticated attacker to terminate or hang the host process via a crafted DOCX, DOC, RTF or HTML document. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.20.0, an attacker can craft an incomplete PDF that ends inside a standard cross-reference table, causing pypdf to mishandle the unexpected end of file and enter an infinite loop. This issue is fixed in version 6.20.0. |
| russh is a Rust SSH client and server library that includes an SSH agent protocol implementation. From 0.60.0 until 0.65.0, channel-open parsing accepts a peer-declared maximum_packet_size of zero and passes it into ChannelTx::poll_writable in russh/src/channels/io/tx.rs. The Channel::data, Channel::make_writer, and Channel::into_stream asynchronous write paths then calculate a writable size of zero and remain pending forever because window adjustments cannot satisfy a static zero packet maximum. An authenticated client can strand server writes, and a malicious server can strand client writes, allowing affected tasks, channels, and connections to accumulate without surfacing an error. This issue is fixed in version 0.65.0. |
| A malicious X server could send malformed RECORD EnableContext reolies that can cause a X client using the parse_reply_call_callback function in libXtst before 1.2.6 to enter a endless loop. |
| Pillow is a Python imaging library. From 5.1.0 until 13.0.0, Pillow can enter an infinite loop while rewriting PDF pages. PdfParser.rewrite_pages() follows Parent relationships without detecting a cycle in the page tree. An attacker can supply a cyclic PDF to an application that appends an image to that PDF. This can hold the worker at full CPU and deny service. This issue is fixed in version 13.0.0. |
| Pillow is a Python imaging library. From 5.1.0 until 13.0.0, Pillow can exhaust resources while parsing an existing PDF during an append operation. PdfParser follows page-tree child references without cycle or duplication tracking and follows previous-trailer chains with only an exact repeated-offset guard, so deep or cyclic page trees and long chains of unique trailer offsets can exhaust the Python stack. Repeated non-cyclic /Kids references can also cause super-linear CPU and memory use. An attacker can supply such a PDF to an application that calls Image.save with PDF append enabled. This can raise an uncaught RecursionError or consume excessive CPU and memory before output is written, causing denial of service. This issue is fixed in version 13.0.0. |
| Pillow is a Python imaging library. Prior to 13.0.0, the TarIO initializer in src/PIL/TarIO.py accepts a negative octal member size and computes a backward seek that returns to the same 512-byte header. When the requested member name does not match, the parser repeatedly reads that header, consumes a full CPU core, and never returns. TarIO is reached only when an application directly uses PIL.TarIO.TarIO rather than the default Image.open() path. This issue is fixed in version 13.0.0. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gma500: return errors from Oaktrail HDMI I2C reads
xfer_read() waits for the HDMI I2C transaction to reach
I2C_TRANSACTION_DONE, but it ignores both timeout and signal returns from
wait_for_completion_interruptible_timeout(). If the interrupt never
advances the transaction state, the loop can wait forever.
Return -ETIMEDOUT when the completion wait expires, propagate interrupted
waits, and make the I2C master_xfer callback return the first transfer
error instead of reporting a successful message count. |
| Seroval facilitates JavaScript value stringification, including complex structures beyond JSON.stringify capabilities. Prior to 1.6.8, fromJSON and fromCrossJSON do not validate a sequence node's done index. A crafted done index can create an iterator that never finishes when application code consumes it to completion. An unauthenticated request to a service that deserializes untrusted input can therefore block the event loop, exhaust process memory, or make the service unavailable. This issue is fixed in version 1.6.8. |
| Infinite loop in Xpdf 4.06 and earlier, due to incorrect validation of progression order field in JPEG 2000 image. |
| JPEGParser can enter an infinite loop while parsing a specially crafted or truncated stream. |
| In Eclipse OpenJ9 versions prior to 0.63.0, the JITServer component is vulnerable to a pre-authentication remote denial of service. When processing the initial 4-byte length field of an incoming TCP connection, an integer overflow in `MessageBuffer::computeRequiredCapacity()` causes the receiving compilation worker thread to enter an infinite loop consuming ~100% CPU. An unauthenticated remote attacker can exploit this by opening a small number of crafted TCP connections to exhaust the entire worker thread pool, silently halting compilation services for all connected client JVMs. |
| Allocation of Resources Without Limits or Throttling vulnerability in the HTTP/2 request body reader of mtrudel bandit allows an unauthenticated remote attacker to hold stream processes open indefinitely via WINDOW_UPDATE or empty SETTINGS frames sent while a Plug reads the request body.
Bandit.HTTP2.Stream.do_read_data/4 in lib/bandit/http2/stream.ex waits for each frame with a fresh read_timeout. A stream WINDOW_UPDATE, or the zero-delta window update that every empty SETTINGS frame delivers to all streams, ends the wait without delivering any body data, and the loop starts a new full countdown. A client that sends one of these 9-byte frames before each countdown expires keeps read_body blocked, together with the stream process and whatever the application holds while reading, for as long as it likes.
This issue affects bandit: from 1.4.0 before 1.14.0. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/ras: reset CPER ring on corrupt entry size
When CPER ring overflow handling advances the read pointer, it trusts the
parsed entry size from the current ring contents. Corrupt CPER data can
produce an entry size that does not advance rptr after dword conversion
and pointer masking.
In that case the recovery loop keeps testing the same location while
holding the CPER ring mutex. This can hang the worker that is writing the
next CPER record.
Detect a no-progress rptr update and reset the CPER ring to an empty
state instead. This drops the corrupt contents and lets the writer leave
the recovery path without spinning. |
| ImageSharp is a 2D graphics library. From 2.0.0 until 4.1.2, ExifReader.ReadValues64 trusts the 64-bit BigTIFF IFD entry count and iterates once per declared entry. When fewer than 20 bytes remain, ExifReader.ReadValue64 returns without advancing the stream or terminating the outer loop, so a small malformed BigTIFF can keep one decoder thread executing for an attacker-controlled duration. This report does not claim worker-pool exhaustion. This issue is fixed in version 4.1.2. |
