Export limit exceeded: 420562 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (420562 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-49819 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: octeon_ep: fix potential memory leak in octep_device_setup() When occur unsupported_dev and mbox init errors, it did not free oct->conf and iounmap() oct->mmio[i].hw_addr. That would trigger memory leak problem. Add kfree() for oct->conf and iounmap() for oct->mmio[i].hw_addr under unsupported_dev and mbox init errors to fix the problem. | ||||
| CVE-2022-49817 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: mhi: Fix memory leak in mhi_net_dellink() MHI driver registers network device without setting the needs_free_netdev flag, and does NOT call free_netdev() when unregisters network device, which causes a memory leak. This patch calls free_netdev() to fix it since netdev_priv is used after unregister. | ||||
| CVE-2022-49813 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ena: Fix error handling in ena_init() The ena_init() won't destroy workqueue created by create_singlethread_workqueue() when pci_register_driver() failed. Call destroy_workqueue() when pci_register_driver() failed to prevent the resource leak. | ||||
| CVE-2022-49812 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bridge: switchdev: Fix memory leaks when changing VLAN protocol The bridge driver can offload VLANs to the underlying hardware either via switchdev or the 8021q driver. When the former is used, the VLAN is marked in the bridge driver with the 'BR_VLFLAG_ADDED_BY_SWITCHDEV' private flag. To avoid the memory leaks mentioned in the cited commit, the bridge driver will try to delete a VLAN via the 8021q driver if the VLAN is not marked with the previously mentioned flag. When the VLAN protocol of the bridge changes, switchdev drivers are notified via the 'SWITCHDEV_ATTR_ID_BRIDGE_VLAN_PROTOCOL' attribute, but the 8021q driver is also called to add the existing VLANs with the new protocol and delete them with the old protocol. In case the VLANs were offloaded via switchdev, the above behavior is both redundant and buggy. Redundant because the VLANs are already programmed in hardware and drivers that support VLAN protocol change (currently only mlx5) change the protocol upon the switchdev attribute notification. Buggy because the 8021q driver is called despite these VLANs being marked with 'BR_VLFLAG_ADDED_BY_SWITCHDEV'. This leads to memory leaks [1] when the VLANs are deleted. Fix by not calling the 8021q driver for VLANs that were already programmed via switchdev. [1] unreferenced object 0xffff8881f6771200 (size 256): comm "ip", pid 446855, jiffies 4298238841 (age 55.240s) hex dump (first 32 bytes): 00 00 7f 0e 83 88 ff ff 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000012819ac>] vlan_vid_add+0x437/0x750 [<00000000f2281fad>] __br_vlan_set_proto+0x289/0x920 [<000000000632b56f>] br_changelink+0x3d6/0x13f0 [<0000000089d25f04>] __rtnl_newlink+0x8ae/0x14c0 [<00000000f6276baf>] rtnl_newlink+0x5f/0x90 [<00000000746dc902>] rtnetlink_rcv_msg+0x336/0xa00 [<000000001c2241c0>] netlink_rcv_skb+0x11d/0x340 [<0000000010588814>] netlink_unicast+0x438/0x710 [<00000000e1a4cd5c>] netlink_sendmsg+0x788/0xc40 [<00000000e8992d4e>] sock_sendmsg+0xb0/0xe0 [<00000000621b8f91>] ____sys_sendmsg+0x4ff/0x6d0 [<000000000ea26996>] ___sys_sendmsg+0x12e/0x1b0 [<00000000684f7e25>] __sys_sendmsg+0xab/0x130 [<000000004538b104>] do_syscall_64+0x3d/0x90 [<0000000091ed9678>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 | ||||
| CVE-2022-49811 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drbd: use after free in drbd_create_device() The drbd_destroy_connection() frees the "connection" so use the _safe() iterator to prevent a use after free. | ||||
| CVE-2022-49810 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix missing xas_retry() calls in xarray iteration netfslib has a number of places in which it performs iteration of an xarray whilst being under the RCU read lock. It *should* call xas_retry() as the first thing inside of the loop and do "continue" if it returns true in case the xarray walker passed out a special value indicating that the walk needs to be redone from the root[*]. Fix this by adding the missing retry checks. [*] I wonder if this should be done inside xas_find(), xas_next_node() and suchlike, but I'm told that's not an simple change to effect. This can cause an oops like that below. Note the faulting address - this is an internal value (|0x2) returned from xarray. BUG: kernel NULL pointer dereference, address: 0000000000000402 ... RIP: 0010:netfs_rreq_unlock+0xef/0x380 [netfs] ... Call Trace: netfs_rreq_assess+0xa6/0x240 [netfs] netfs_readpage+0x173/0x3b0 [netfs] ? init_wait_var_entry+0x50/0x50 filemap_read_page+0x33/0xf0 filemap_get_pages+0x2f2/0x3f0 filemap_read+0xaa/0x320 ? do_filp_open+0xb2/0x150 ? rmqueue+0x3be/0xe10 ceph_read_iter+0x1fe/0x680 [ceph] ? new_sync_read+0x115/0x1a0 new_sync_read+0x115/0x1a0 vfs_read+0xf3/0x180 ksys_read+0x5f/0xe0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Changes: ======== ver #2) - Changed an unsigned int to a size_t to reduce the likelihood of an overflow as per Willy's suggestion. - Added an additional patch to fix the maths. | ||||
| CVE-2022-49807 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: fix a memory leak in nvmet_auth_set_key When changing dhchap secrets we need to release the old secrets as well. kmemleak complaint: -- unreferenced object 0xffff8c7f44ed8180 (size 64): comm "check", pid 7304, jiffies 4295686133 (age 72034.246s) hex dump (first 32 bytes): 44 48 48 43 2d 31 3a 30 30 3a 4c 64 4c 4f 64 71 DHHC-1:00:LdLOdq 79 56 69 67 77 48 55 32 6d 5a 59 4c 7a 35 59 38 yVigwHU2mZYLz5Y8 backtrace: [<00000000b6fc5071>] kstrdup+0x2e/0x60 [<00000000f0f4633f>] 0xffffffffc0e07ee6 [<0000000053006c05>] 0xffffffffc0dff783 [<00000000419ae922>] configfs_write_iter+0xb1/0x120 [<000000008183c424>] vfs_write+0x2be/0x3c0 [<000000009005a2a5>] ksys_write+0x5f/0xe0 [<00000000cd495c89>] do_syscall_64+0x38/0x90 [<00000000f2a84ac5>] entry_SYSCALL_64_after_hwframe+0x63/0xcd | ||||
| CVE-2022-49803 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netdevsim: Fix memory leak of nsim_dev->fa_cookie kmemleak reports this issue: unreferenced object 0xffff8881bac872d0 (size 8): comm "sh", pid 58603, jiffies 4481524462 (age 68.065s) hex dump (first 8 bytes): 04 00 00 00 de ad be ef ........ backtrace: [<00000000c80b8577>] __kmalloc+0x49/0x150 [<000000005292b8c6>] nsim_dev_trap_fa_cookie_write+0xc1/0x210 [netdevsim] [<0000000093d78e77>] full_proxy_write+0xf3/0x180 [<000000005a662c16>] vfs_write+0x1c5/0xaf0 [<000000007aabf84a>] ksys_write+0xed/0x1c0 [<000000005f1d2e47>] do_syscall_64+0x3b/0x90 [<000000006001c6ec>] entry_SYSCALL_64_after_hwframe+0x63/0xcd The issue occurs in the following scenarios: nsim_dev_trap_fa_cookie_write() kmalloc() fa_cookie nsim_dev->fa_cookie = fa_cookie .. nsim_drv_remove() The fa_cookie allocked in nsim_dev_trap_fa_cookie_write() is not freed. To fix, add kfree(nsim_dev->fa_cookie) to nsim_drv_remove(). | ||||
| CVE-2022-49802 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix null pointer dereference in ftrace_add_mod() The @ftrace_mod is allocated by kzalloc(), so both the members {prev,next} of @ftrace_mode->list are NULL, it's not a valid state to call list_del(). If kstrdup() for @ftrace_mod->{func|module} fails, it goes to @out_free tag and calls free_ftrace_mod() to destroy @ftrace_mod, then list_del() will write prev->next and next->prev, where null pointer dereference happens. BUG: kernel NULL pointer dereference, address: 0000000000000008 Oops: 0002 [#1] PREEMPT SMP NOPTI Call Trace: <TASK> ftrace_mod_callback+0x20d/0x220 ? do_filp_open+0xd9/0x140 ftrace_process_regex.isra.51+0xbf/0x130 ftrace_regex_write.isra.52.part.53+0x6e/0x90 vfs_write+0xee/0x3a0 ? __audit_filter_op+0xb1/0x100 ? auditd_test_task+0x38/0x50 ksys_write+0xa5/0xe0 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Kernel panic - not syncing: Fatal exception So call INIT_LIST_HEAD() to initialize the list member to fix this issue. | ||||
| CVE-2022-49801 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix memory leak in tracing_read_pipe() kmemleak reports this issue: unreferenced object 0xffff888105a18900 (size 128): comm "test_progs", pid 18933, jiffies 4336275356 (age 22801.766s) hex dump (first 32 bytes): 25 73 00 90 81 88 ff ff 26 05 00 00 42 01 58 04 %s......&...B.X. 03 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000560143a1>] __kmalloc_node_track_caller+0x4a/0x140 [<000000006af00822>] krealloc+0x8d/0xf0 [<00000000c309be6a>] trace_iter_expand_format+0x99/0x150 [<000000005a53bdb6>] trace_check_vprintf+0x1e0/0x11d0 [<0000000065629d9d>] trace_event_printf+0xb6/0xf0 [<000000009a690dc7>] trace_raw_output_bpf_trace_printk+0x89/0xc0 [<00000000d22db172>] print_trace_line+0x73c/0x1480 [<00000000cdba76ba>] tracing_read_pipe+0x45c/0x9f0 [<0000000015b58459>] vfs_read+0x17b/0x7c0 [<000000004aeee8ed>] ksys_read+0xed/0x1c0 [<0000000063d3d898>] do_syscall_64+0x3b/0x90 [<00000000a06dda7f>] entry_SYSCALL_64_after_hwframe+0x63/0xcd iter->fmt alloced in tracing_read_pipe() -> .. ->trace_iter_expand_format(), but not freed, to fix, add free in tracing_release_pipe() | ||||
| CVE-2022-49800 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix memory leak in test_gen_synth_cmd() and test_empty_synth_event() test_gen_synth_cmd() only free buf in fail path, hence buf will leak when there is no failure. Add kfree(buf) to prevent the memleak. The same reason and solution in test_empty_synth_event(). unreferenced object 0xffff8881127de000 (size 2048): comm "modprobe", pid 247, jiffies 4294972316 (age 78.756s) hex dump (first 32 bytes): 20 67 65 6e 5f 73 79 6e 74 68 5f 74 65 73 74 20 gen_synth_test 20 70 69 64 5f 74 20 6e 65 78 74 5f 70 69 64 5f pid_t next_pid_ backtrace: [<000000004254801a>] kmalloc_trace+0x26/0x100 [<0000000039eb1cf5>] 0xffffffffa00083cd [<000000000e8c3bc8>] 0xffffffffa00086ba [<00000000c293d1ea>] do_one_initcall+0xdb/0x480 [<00000000aa189e6d>] do_init_module+0x1cf/0x680 [<00000000d513222b>] load_module+0x6a50/0x70a0 [<000000001fd4d529>] __do_sys_finit_module+0x12f/0x1c0 [<00000000b36c4c0f>] do_syscall_64+0x3f/0x90 [<00000000bbf20cf3>] entry_SYSCALL_64_after_hwframe+0x63/0xcd unreferenced object 0xffff8881127df000 (size 2048): comm "modprobe", pid 247, jiffies 4294972324 (age 78.728s) hex dump (first 32 bytes): 20 65 6d 70 74 79 5f 73 79 6e 74 68 5f 74 65 73 empty_synth_tes 74 20 20 70 69 64 5f 74 20 6e 65 78 74 5f 70 69 t pid_t next_pi backtrace: [<000000004254801a>] kmalloc_trace+0x26/0x100 [<00000000d4db9a3d>] 0xffffffffa0008071 [<00000000c31354a5>] 0xffffffffa00086ce [<00000000c293d1ea>] do_one_initcall+0xdb/0x480 [<00000000aa189e6d>] do_init_module+0x1cf/0x680 [<00000000d513222b>] load_module+0x6a50/0x70a0 [<000000001fd4d529>] __do_sys_finit_module+0x12f/0x1c0 [<00000000b36c4c0f>] do_syscall_64+0x3f/0x90 [<00000000bbf20cf3>] entry_SYSCALL_64_after_hwframe+0x63/0xcd | ||||
| CVE-2022-49799 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix wild-memory-access in register_synth_event() In register_synth_event(), if set_synth_event_print_fmt() failed, then both trace_remove_event_call() and unregister_trace_event() will be called, which means the trace_event_call will call __unregister_trace_event() twice. As the result, the second unregister will causes the wild-memory-access. register_synth_event set_synth_event_print_fmt failed trace_remove_event_call event_remove if call->event.funcs then __unregister_trace_event (first call) unregister_trace_event __unregister_trace_event (second call) Fix the bug by avoiding to call the second __unregister_trace_event() by checking if the first one is called. general protection fault, probably for non-canonical address 0xfbd59c0000000024: 0000 [#1] SMP KASAN PTI KASAN: maybe wild-memory-access in range [0xdead000000000120-0xdead000000000127] CPU: 0 PID: 3807 Comm: modprobe Not tainted 6.1.0-rc1-00186-g76f33a7eedb4 #299 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 RIP: 0010:unregister_trace_event+0x6e/0x280 Code: 00 fc ff df 4c 89 ea 48 c1 ea 03 80 3c 02 00 0f 85 0e 02 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 63 08 4c 89 e2 48 c1 ea 03 <80> 3c 02 00 0f 85 e2 01 00 00 49 89 2c 24 48 85 ed 74 28 e8 7a 9b RSP: 0018:ffff88810413f370 EFLAGS: 00010a06 RAX: dffffc0000000000 RBX: ffff888105d050b0 RCX: 0000000000000000 RDX: 1bd5a00000000024 RSI: ffff888119e276e0 RDI: ffffffff835a8b20 RBP: dead000000000100 R08: 0000000000000000 R09: fffffbfff0913481 R10: ffffffff8489a407 R11: fffffbfff0913480 R12: dead000000000122 R13: ffff888105d050b8 R14: 0000000000000000 R15: ffff888105d05028 FS: 00007f7823e8d540(0000) GS:ffff888119e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7823e7ebec CR3: 000000010a058002 CR4: 0000000000330ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __create_synth_event+0x1e37/0x1eb0 create_or_delete_synth_event+0x110/0x250 synth_event_run_command+0x2f/0x110 test_gen_synth_cmd+0x170/0x2eb [synth_event_gen_test] synth_event_gen_test_init+0x76/0x9bc [synth_event_gen_test] do_one_initcall+0xdb/0x480 do_init_module+0x1cf/0x680 load_module+0x6a50/0x70a0 __do_sys_finit_module+0x12f/0x1c0 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd | ||||
| CVE-2022-49797 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: kprobe: Fix potential null-ptr-deref on trace_event_file in kprobe_event_gen_test_exit() When trace_get_event_file() failed, gen_kretprobe_test will be assigned as the error code. If module kprobe_event_gen_test is removed now, the null pointer dereference will happen in kprobe_event_gen_test_exit(). Check if gen_kprobe_test or gen_kretprobe_test is error code or NULL before dereference them. BUG: kernel NULL pointer dereference, address: 0000000000000012 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 3 PID: 2210 Comm: modprobe Not tainted 6.1.0-rc1-00171-g2159299a3b74-dirty #217 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 RIP: 0010:kprobe_event_gen_test_exit+0x1c/0xb5 [kprobe_event_gen_test] Code: Unable to access opcode bytes at 0xffffffff9ffffff2. RSP: 0018:ffffc900015bfeb8 EFLAGS: 00010246 RAX: ffffffffffffffea RBX: ffffffffa0002080 RCX: 0000000000000000 RDX: ffffffffa0001054 RSI: ffffffffa0001064 RDI: ffffffffdfc6349c RBP: ffffffffa0000000 R08: 0000000000000004 R09: 00000000001e95c0 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000800 R13: ffffffffa0002420 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f56b75be540(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff9ffffff2 CR3: 000000010874a006 CR4: 0000000000330ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __x64_sys_delete_module+0x206/0x380 ? lockdep_hardirqs_on_prepare+0xd8/0x190 ? syscall_enter_from_user_mode+0x1c/0x50 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd | ||||
| CVE-2022-49795 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rethook: fix a potential memleak in rethook_alloc() In rethook_alloc(), the variable rh is not freed or passed out if handler is NULL, which could lead to a memleak, fix it. [Masami: Add "rethook:" tag to the title.] Acke-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> | ||||
| CVE-2022-49791 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: io_uring: fix multishot accept request leaks Having REQ_F_POLLED set doesn't guarantee that the request is executed as a multishot from the polling path. Fortunately for us, if the code thinks it's multishot issue when it's not, it can only ask to skip completion so leaking the request. Use issue_flags to mark multipoll issues. | ||||
| CVE-2022-49788 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: misc/vmw_vmci: fix an infoleak in vmci_host_do_receive_datagram() `struct vmci_event_qp` allocated by qp_notify_peer() contains padding, which may carry uninitialized data to the userspace, as observed by KMSAN: BUG: KMSAN: kernel-infoleak in instrument_copy_to_user ./include/linux/instrumented.h:121 instrument_copy_to_user ./include/linux/instrumented.h:121 _copy_to_user+0x5f/0xb0 lib/usercopy.c:33 copy_to_user ./include/linux/uaccess.h:169 vmci_host_do_receive_datagram drivers/misc/vmw_vmci/vmci_host.c:431 vmci_host_unlocked_ioctl+0x33d/0x43d0 drivers/misc/vmw_vmci/vmci_host.c:925 vfs_ioctl fs/ioctl.c:51 ... Uninit was stored to memory at: kmemdup+0x74/0xb0 mm/util.c:131 dg_dispatch_as_host drivers/misc/vmw_vmci/vmci_datagram.c:271 vmci_datagram_dispatch+0x4f8/0xfc0 drivers/misc/vmw_vmci/vmci_datagram.c:339 qp_notify_peer+0x19a/0x290 drivers/misc/vmw_vmci/vmci_queue_pair.c:1479 qp_broker_attach drivers/misc/vmw_vmci/vmci_queue_pair.c:1662 qp_broker_alloc+0x2977/0x2f30 drivers/misc/vmw_vmci/vmci_queue_pair.c:1750 vmci_qp_broker_alloc+0x96/0xd0 drivers/misc/vmw_vmci/vmci_queue_pair.c:1940 vmci_host_do_alloc_queuepair drivers/misc/vmw_vmci/vmci_host.c:488 vmci_host_unlocked_ioctl+0x24fd/0x43d0 drivers/misc/vmw_vmci/vmci_host.c:927 ... Local variable ev created at: qp_notify_peer+0x54/0x290 drivers/misc/vmw_vmci/vmci_queue_pair.c:1456 qp_broker_attach drivers/misc/vmw_vmci/vmci_queue_pair.c:1662 qp_broker_alloc+0x2977/0x2f30 drivers/misc/vmw_vmci/vmci_queue_pair.c:1750 Bytes 28-31 of 48 are uninitialized Memory access of size 48 starts at ffff888035155e00 Data copied to user address 0000000020000100 Use memset() to prevent the infoleaks. Also speculatively fix qp_notify_peer_local(), which may suffer from the same problem. | ||||
| CVE-2022-49786 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: properly pin the parent in blkcg_css_online blkcg_css_online is supposed to pin the blkcg of the parent, but 397c9f46ee4d refactored things and along the way, changed it to pin the css instead. This results in extra pins, and we end up leaking blkcgs and cgroups. | ||||
| CVE-2022-49784 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/amd/uncore: Fix memory leak for events array When a CPU comes online, the per-CPU NB and LLC uncore contexts are freed but not the events array within the context structure. This causes a memory leak as identified by the kmemleak detector. [...] unreferenced object 0xffff8c5944b8e320 (size 32): comm "swapper/0", pid 1, jiffies 4294670387 (age 151.072s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000000759fb79>] amd_uncore_cpu_up_prepare+0xaf/0x230 [<00000000ddc9e126>] cpuhp_invoke_callback+0x2cf/0x470 [<0000000093e727d4>] cpuhp_issue_call+0x14d/0x170 [<0000000045464d54>] __cpuhp_setup_state_cpuslocked+0x11e/0x330 [<0000000069f67cbd>] __cpuhp_setup_state+0x6b/0x110 [<0000000015365e0f>] amd_uncore_init+0x260/0x321 [<00000000089152d2>] do_one_initcall+0x3f/0x1f0 [<000000002d0bd18d>] kernel_init_freeable+0x1ca/0x212 [<0000000030be8dde>] kernel_init+0x11/0x120 [<0000000059709e59>] ret_from_fork+0x22/0x30 unreferenced object 0xffff8c5944b8dd40 (size 64): comm "swapper/0", pid 1, jiffies 4294670387 (age 151.072s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000306efe8b>] amd_uncore_cpu_up_prepare+0x183/0x230 [<00000000ddc9e126>] cpuhp_invoke_callback+0x2cf/0x470 [<0000000093e727d4>] cpuhp_issue_call+0x14d/0x170 [<0000000045464d54>] __cpuhp_setup_state_cpuslocked+0x11e/0x330 [<0000000069f67cbd>] __cpuhp_setup_state+0x6b/0x110 [<0000000015365e0f>] amd_uncore_init+0x260/0x321 [<00000000089152d2>] do_one_initcall+0x3f/0x1f0 [<000000002d0bd18d>] kernel_init_freeable+0x1ca/0x212 [<0000000030be8dde>] kernel_init+0x11/0x120 [<0000000059709e59>] ret_from_fork+0x22/0x30 [...] Fix the problem by freeing the events array before freeing the uncore context. | ||||
| CVE-2022-49783 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Drop fpregs lock before inheriting FPU permissions Mike Galbraith reported the following against an old fork of preempt-rt but the same issue also applies to the current preempt-rt tree. BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: systemd preempt_count: 1, expected: 0 RCU nest depth: 0, expected: 0 Preemption disabled at: fpu_clone CPU: 6 PID: 1 Comm: systemd Tainted: G E (unreleased) Call Trace: <TASK> dump_stack_lvl ? fpu_clone __might_resched rt_spin_lock fpu_clone ? copy_thread ? copy_process ? shmem_alloc_inode ? kmem_cache_alloc ? kernel_clone ? __do_sys_clone ? do_syscall_64 ? __x64_sys_rt_sigprocmask ? syscall_exit_to_user_mode ? do_syscall_64 ? syscall_exit_to_user_mode ? do_syscall_64 ? syscall_exit_to_user_mode ? do_syscall_64 ? exc_page_fault ? entry_SYSCALL_64_after_hwframe </TASK> Mike says: The splat comes from fpu_inherit_perms() being called under fpregs_lock(), and us reaching the spin_lock_irq() therein due to fpu_state_size_dynamic() returning true despite static key __fpu_state_size_dynamic having never been enabled. Mike's assessment looks correct. fpregs_lock on a PREEMPT_RT kernel disables preemption so calling spin_lock_irq() in fpu_inherit_perms() is unsafe. This problem exists since commit 9e798e9aa14c ("x86/fpu: Prepare fpu_clone() for dynamically enabled features"). Even though the original bug report should not have enabled the paths at all, the bug still exists. fpregs_lock is necessary when editing the FPU registers or a task's FP state but it is not necessary for fpu_inherit_perms(). The only write of any FP state in fpu_inherit_perms() is for the new child which is not running yet and cannot context switch or be borrowed by a kernel thread yet. Hence, fpregs_lock is not protecting anything in the new child until clone() completes and can be dropped earlier. The siglock still needs to be acquired by fpu_inherit_perms() as the read of the parent's permissions has to be serialised. [ bp: Cleanup splat. ] | ||||
| CVE-2022-49782 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf: Improve missing SIGTRAP checking To catch missing SIGTRAP we employ a WARN in __perf_event_overflow(), which fires if pending_sigtrap was already set: returning to user space without consuming pending_sigtrap, and then having the event fire again would re-enter the kernel and trigger the WARN. This, however, seemed to miss the case where some events not associated with progress in the user space task can fire and the interrupt handler runs before the IRQ work meant to consume pending_sigtrap (and generate the SIGTRAP). syzbot gifted us this stack trace: | WARNING: CPU: 0 PID: 3607 at kernel/events/core.c:9313 __perf_event_overflow | Modules linked in: | CPU: 0 PID: 3607 Comm: syz-executor100 Not tainted 6.1.0-rc2-syzkaller-00073-g88619e77b33d #0 | Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022 | RIP: 0010:__perf_event_overflow+0x498/0x540 kernel/events/core.c:9313 | <...> | Call Trace: | <TASK> | perf_swevent_hrtimer+0x34f/0x3c0 kernel/events/core.c:10729 | __run_hrtimer kernel/time/hrtimer.c:1685 [inline] | __hrtimer_run_queues+0x1c6/0xfb0 kernel/time/hrtimer.c:1749 | hrtimer_interrupt+0x31c/0x790 kernel/time/hrtimer.c:1811 | local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1096 [inline] | __sysvec_apic_timer_interrupt+0x17c/0x640 arch/x86/kernel/apic/apic.c:1113 | sysvec_apic_timer_interrupt+0x40/0xc0 arch/x86/kernel/apic/apic.c:1107 | asm_sysvec_apic_timer_interrupt+0x16/0x20 arch/x86/include/asm/idtentry.h:649 | <...> | </TASK> In this case, syzbot produced a program with event type PERF_TYPE_SOFTWARE and config PERF_COUNT_SW_CPU_CLOCK. The hrtimer manages to fire again before the IRQ work got a chance to run, all while never having returned to user space. Improve the WARN to check for real progress in user space: approximate this by storing a 32-bit hash of the current IP into pending_sigtrap, and if an event fires while pending_sigtrap still matches the previous IP, we assume no progress (false negatives are possible given we could return to user space and trigger again on the same IP). | ||||