Export limit exceeded: 417330 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 26112 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26112 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98486 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 1.9 Low |
| In the Linux kernel, the following vulnerability has been resolved: net: ena: fix MMIO read buffer leak on probe failure ena_device_init() initializes the MMIO read mechanism with ena_com_mmio_reg_read_request_init(), which allocates a coherent DMA buffer for MMIO read responses. The normal removal path releases this buffer through ena_com_mmio_reg_read_request_destroy(). However, if ena_probe() fails after ena_device_init() succeeds, the error path destroys the admin resources and eventually frees ena_dev without destroying the MMIO read request, leaving the coherent DMA buffer allocated. Call ena_com_mmio_reg_read_request_destroy() in the probe error path before releasing the remaining device resources. This issue was found by manual code inspection. | ||||
| CVE-2026-98484 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 3.4 Low |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: skip expired catchall elements on insert and delete nft_setelem_catchall_insert() looks up duplicates with nft_set_elem_active() only, while nft_set_catchall_lookup() and the dump path additionally skip expired elements. Once a catchall element with a timeout expires, this predicate drift makes it invisible to userspace dumps, yet it still blocks re-insertion: with NLM_F_EXCL the request fails with -EEXIST, and without it the request reports success but silently inserts nothing. The stale entry only goes away when the (user-tunable) gc interval elapses, so the catchall rule may silently stop matching for an arbitrarily long time after its first expiration. The delete path shows the same drift: nft_setelem_catchall_deactivate() picks the first active-next entry in the catchall list, so with an expired entry still pending GC it retires the stale entry instead of the fresh one, and it deactivates an element that userspace no longer sees instead of failing with -ENOENT. Align both walks with the lookup and dump predicates: only an element that is active and not expired counts as a duplicate or delete candidate, using the per-netns timestamp taken at transaction start, in line with the set backend .insert/.deactivate and catchall GC sync paths. | ||||
| CVE-2026-98456 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: mgmt: fix race in read_unconf_index_list() read_unconf_index_list() counts unconfigured controllers before allocating its response, then checks the device flags again while filling it. hci_dev_list_lock stabilizes list membership, but it does not serialize the per-device flags. During asynchronous controller setup, the worker can set HCI_UNCONFIGURED and clear HCI_SETUP between the two passes. A controller omitted from the allocation count can then become eligible for the fill pass, causing an out-of-bounds write to rp->index[]. Allocate space for every device on hci_dev_list. Since list membership cannot change while hci_dev_list_lock is held, the response remains large enough regardless of flag transitions. The reported count and response length still include only eligible unconfigured controllers. | ||||
| CVE-2026-98454 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix create context out-of-bounds reads smb2_parse_contexts() validates the complete create-context area but does not limit each record to its Next field before dispatching it. A malformed chain can therefore expose bytes beyond the current context to a handler. The QFid handler also used a full response-structure cast although it only reads DiskFileId. The SMB2/SMB3 lease parsers made the same layout assumption: they read LeaseState and LeaseFlags at canonical offsets rather than at DataOffset. A valid non-canonical DataOffset could therefore yield unrelated in-bounds data, while a short DataLength was still accepted. Limit each context to its Next value, reject offsets before the context header, and reject malformed chains. Bound the name range by the current context and do not dispatch a known handler when DataLength is zero. Read the QFid DiskFileId only when the context data covers that field. Parse the lease context from DataOffset and require DataLength to match the v1 or v2 lease_context size used by ksmbd. A size mismatch skips lease parsing without failing the open. | ||||
| CVE-2026-98453 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 4.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: close handle after create-context parsing failure SMB2_open() accounts a successful CREATE response as a remote open before parsing its create contexts. If smb2_parse_contexts() rejects malformed context data, SMB2_open() returns without closing the handle, leaving the server-side handle open and num_remote_opens elevated. Close the handle after a post-CREATE context parsing failure so the error path releases the remote resource and balances the open count. | ||||
| CVE-2026-98451 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: use finish_no_open() for non-regular inodes An O_CREAT open can find an existing symlink or another non-regular inode. cifs_atomic_open() calls finish_open() on it and attaches a cifsFileInfo. Symlink inodes have no CIFS release operation, so the dentry reference held by cifsFileInfo is leaked. FMODE_OPENED also prevents the VFS from following the symlink. Track whether cifs_do_create() returned an open server handle. For non-regular inodes, close the handle if present, remove the pending open, and call finish_no_open() so the VFS can continue the lookup. Do not set FMODE_CREATED unless a regular file was opened. For O_NOFOLLOW with __O_REGULAR, return -ELOOP before the VFS's -EFTYPE check. Defer closing a legacy POSIX handle on a non-regular inode until after inode lookup. This avoids closing it again if lookup fails. | ||||
| CVE-2026-98450 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: close completed creates on compound wait errors compound_send_recv() waits for responses in order. If a later wait is interrupted, or if a later MID fails during response synchronization, an earlier CREATE may already have opened a remote handle. The earlier mid is then released without invoking handle_cancelled_mid(), leaving the remote handle open because no FID was copied to the caller. Mark completed earlier mids as cancelled when a compound wait or MID synchronization aborts. Keep their response buffers attached while the MIDs are synchronized, and transfer them only after synchronization of the processed responses, so the release path can inspect successful CREATE responses and queue SMB2_close() after a later failure. Account for a remote open only after the close work is allocated and before it is queued, since the caller has not yet updated num_remote_opens. Mark the create+close compound used by smb2_unlink() so it is not closed again. Non-CREATE responses and compounds that already include a close keep their existing behavior. | ||||
| CVE-2026-98443 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix cursor and pointer handling when recovering iunlink buckets LOLLM pointed out a bug in xlog_recover_iunlink_bucket: 1. We don't null out prev_ip after releasing it, which can lead to UAF problems if the inodegc flush call in the loop fails. at which point I noticed even more bugs: 2. If the inodegc flush inside the loop fails, we also leak @ip. 3. We set prev_agino to agino having already advanced agino, which results in inodes with i_prev_unlinked set to itself. 4. If we exit the bottom of the loop with prev_ip set, then prev_ip aliases ip and we also set its i_prev_unlinked to itself. Bugs 3 and 4 introduce loops into the unlinked list, though these loops don't surface because we immediately flush each unlinked inode after loading it. Fix all of these issues. | ||||
| CVE-2026-98409 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: watchdog: rtd119x: Avoid division by zero clk_get_rate() could return 0. Avoid a division by zero panic. | ||||
| CVE-2026-98386 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Use memset_io() to clear QLAFX00 request ring slot For QLAFX00 the request ring is ioremapped device I/O memory (ha->iobase + req_que_off), not DMA-coherent RAM, which is why the rest of the FX00 path accesses it through memcpy_toio() and the wrt_reg_* helpers. __qla2x00_alloc_iocbs() however zeroed the producer slot with a plain memset(). On architectures such as ARM64 a regular memset() may emit unaligned or block-zeroing instructions (e.g. DC ZVA) that are invalid on Device memory, leading to a synchronous external abort. Use memset_io() to clear the slot for QLAFX00, matching the I/O accessors used elsewhere on this ring. Other adapters keep the plain memset() on their DMA-coherent rings. The zero-fill is retained for FX00 because its IOCB builders (e.g. qlafx00_fxdisc_iocb()) copy only part of the entry and rely on the unused tail being pre-zeroed. | ||||
| CVE-2026-98377 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: vlan: require the MAC header to be present in __vlan_insert_inner_tag() __vlan_insert_inner_tag() only guarantees head room via skb_cow_head(), never that mac_len bytes of MAC header are present. Its ETH_HLEN wrappers - __vlan_insert_tag() under skb_vlan_push(), and vlan_insert_tag() under validate_xmit_vlan() on the generic transmit path - therefore rewrite the first 16 bytes at skb->data: a 12-byte memmove plus two 2-byte stores at +12 and +14. No caller supplies the bound, while the pop helpers use skb_ensure_writable()/pskb_may_pull(). An IFF_TUN device has hard_header_len == 0, so packet_snd() accepts a one-byte AF_PACKET/SOCK_RAW frame. The first vlan push only sets a hwaccel tag; the next - clsact "action vlan push" or bpf_skb_vlan_push() - enters the helper with skb->len still 1. The head comes from skbuff_small_head without __GFP_ZERO, so each push drags bytes from beyond skb->tail into the frame. After three the one-byte send leaves as 13 bytes carrying 11 bytes of uninitialised slab: 0000: 5a b3 62 12 80 88 ff ff 00 b3 62 12 81 `------------------------------' only 0x5a was sent; the rest is slab, here the top 56 bits of a linear-map address Require the MAC header the helper rewrites to be present, so such a frame is dropped rather than transmitted. | ||||
| CVE-2026-98375 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: xen/netfront: drop RX packets with a short Ethernet header handle_incoming_queue() pulls pull_to bytes into the head before calling eth_type_trans(). pull_to is the length of the first RX slot, capped at RX_COPY_THRESHOLD, and that length comes from the backend. Nothing checks it against ETH_HLEN. If the first slot is shorter than ETH_HLEN and more slots follow, the head ends up shorter than an Ethernet header while skb->len is longer, and eth_type_trans() BUG()s in __skb_pull(). If the whole packet is shorter than ETH_HLEN, eth_type_trans() reads the header past the end of the data instead. Pull at least ETH_HLEN, and drop the packet if that fails, which also drops packets too short to hold an Ethernet header. This also checks the return value of the pull, which was ignored. | ||||
| CVE-2026-98373 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: preserve mremap address delta when skipping page tables move_hugetlb_page_tables() optimizes mremap() by advancing to the last entry in the page table when the source page table does not exist, either initially or after unsharing a PMD table. The common loop increment then steps to the first entry in the next page table. However, the code advances both the source and destination addresses to the last entries in their respective page tables, which is wrong. The destination address must be advanced only by the same amount as the source address. If the source and destination offsets within their page tables differ, the destination address can be advanced too far, causing follow-up issues. Fix this by advancing the destination address by the source advance distance. With a reproducer, we were able to trigger a kernel panic on x86-64. With this fix in place, we can no longer reproduce the issue. | ||||
| CVE-2026-98297 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Fix queuing tx_work after workqueue is drained hci_send_acl(), hci_send_sco() and hci_send_iso() queue hdev->tx_work unconditionally. They can run from the L2CAP/SCO/ISO socket send path while hci_dev_close_sync() is draining hdev->workqueue (HCIDEVDOWN racing with a socket write). Since that queue_work() is not chained work from the tx_work worker itself, __queue_work() sees the queue marked __WQ_DRAINING, warns "cannot queue %ps on wq %s", and drops the work: WARNING: CPU: 1 PID: 5985 at kernel/workqueue.c:2352 __queue_work Call Trace: queue_work_on l2cap_chan_send l2cap_sock_sendmsg ... hci_dev_close_sync() already sets HCI_CMD_DRAIN_WORKQUEUE before draining, but only hci_cmd_work() and handle_cmd_cnt_and_timer() check it before queuing. Route the tx_work producers through the same guard via a shared hci_sched_tx() helper. | ||||
| CVE-2026-98265 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Clamp implicit feedback packet count to URB capacity data_ep_set_params() allocates each data URB for exactly u->packets isochronous frames, so urb->iso_frame_desc[] has u->packets slots and ctx->packets is the driver's only record of that limit. For an implicit feedback sink, snd_usb_queue_pending_output_urbs() overwrites it with the sync source's packet count, which is calculated independently from the capture endpoint's parameters. When that count is larger, prepare_playback_urb() and prepare_silent_urb() can write iso_frame_desc[] past the allocation; their existing bounds limit payload bytes, not the descriptor index. The reproducer uses a high-speed UAC2 device declaring bInterval 1 for implicit feedback capture (8 packets) and bInterval 4 for playback (1 packet). On the first capture completion after the stream starts, it accesses seven descriptors spanning 112 bytes beyond the one-packet URB: BUG: KASAN: slab-out-of-bounds in prepare_playback_urb (sound/usb/pcm.c:1560) Write of size 4 at addr ffff88801e696ad0 by task vhci_rx/178 prepare_playback_urb (sound/usb/pcm.c:1560) prepare_outbound_urb (sound/usb/endpoint.c:340) snd_usb_queue_pending_output_urbs (sound/usb/endpoint.c:501) snd_complete_urb (sound/usb/endpoint.c:1834) __usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1657) usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1741) vhci_rx_loop (drivers/usb/usbip/vhci_rx.c:107) kthread (kernel/kthread.c:436) The buggy address belongs to the object at ffff88801e696a00 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 0 bytes to the right of allocated 208-byte region [ffff88801e696a00, ffff88801e696ad0) Record the allocated packet count per endpoint and clamp both the adopted count and the packet-size copy to it. Fold the Format Type II delimiter into urb_packs before the allocation loop so the recorded limit matches every URB. | ||||
| CVE-2026-98264 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: virtio: reset device before deleting virtqueues virtsnd_remove() and virtsnd_freeze() delete the virtqueues before resetting the device. del_vqs() frees the vring backing, but does not provide a generic device quiesce operation. In particular, modern virtio-pci keeps enabled queues active until the device is reset. Reset the device before deleting the virtqueues so it can no longer access the vring memory when that memory is released. This also covers probe failures after DRIVER_OK, which unwind through virtsnd_remove(). | ||||
| CVE-2026-98260 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: exec: Cleanup POSIX timers right after de_thread() A per-thread CPU timer holds a reference to the PID of the thread it is attached to and, while it is armed, its node is queued in that thread's posix_cputimers. The task is looked up by that PID. When a non-leader thread exec()s, de_thread() changes which task owns that PID. pid_task(timer->it.cpu.pid, PIDTYPE_PID) then returns NULL, but the node is still queued on tsk, which is alive. timer_lock_sighand() takes a failed lookup to mean that the node is already dequeued, so it has nothing to undo. begin_new_exec() calls posix_cpu_timers_exit(me) right after exec_task_namespaces() and that removes the leftover node, so the state normally stays invisible. But bprm->point_of_no_return is set before de_thread(), so if unshare_files(), set_mm_exe_file(), exec_mmap() or exec_task_namespaces() fails, the task dies before it gets there. exit_itimers() then frees the k_itimer while its node is still queued, and reaping tsk later erases that freed node from the rbtree. In short: the non-leader thread B the parent timer_create(CLOCK_THREAD_CPUTIME_ID) timer_settime() arm_timer() // the node is queued on B execve() de_thread(B) exchange_tids(B, leader) // B's PID now belongs to the leader release_task(leader) __exit_signal(leader) posix_cpu_timers_exit(leader) // cleans leader's queue, not B's __unhash_process(leader) // that PID has no task anymore exec_mmap() mmap_read_lock_killable(old_mm) kill(B, SIGKILL) // -EINTR get_signal() do_exit() exit_itimers() posix_timer_delete() posix_cpu_timer_del() posix_timer_unhash_and_free() // freed while still queued wait4() release_task(B) posix_cpu_timers_exit(B) cleanup_timerqueue() timerqueue_del() // use-after-free Move the POSIX timer cleanup right after de_thread() before any of the later failure conditions brings the task into do_exit(). [ tglx: Move the cleanup right after de_thread() ] | ||||
| CVE-2026-98245 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: take commit root semaphore when iterating in mark_block_group_to_copy() mark_block_group_to_copy() iterates over the commit root with skip_locking=true. A concurrent transaction commit can swap and free the commit root during iteration, causing use-after-free when accessing extent buffers. Fix it by using path->need_commit_sem to protect the commit root search. | ||||
| CVE-2026-98198 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pwm-fan) Stop RPM timer before freeing tach data sample_timer() rearms the RPM timer and accesses the devm-managed ctx->tachs and ctx->pulses_per_revolution arrays. The cleanup action which stops the timer is registered before those arrays are allocated. Since devres releases entries in reverse order, driver detach can free the arrays before pwm_fan_cleanup() shuts down the timer. A timer expiry in that window accesses the freed tach data. With a KASAN kernel, a test-only kprobe delayed entry to pwm_fan_cleanup() while normal sysfs unbind ran. Each of three runs reported three four-byte reads and two four-byte writes in sample_timer() after its backing devm allocations had been freed. The helper did not invoke the timer callback, cleanup actions or free functions. With the fix, three matching unbind runs completed without KASAN, BUG, WARNING, Oops or panic. Instrumentation confirmed that timer retirement completed before the first timer backing allocation was released. Split timer retirement from the power cleanup and register its devres action after the timer backing data and IRQ actions are installed. This preserves the early power rollback action while ensuring the timer is retired before its backing data is released. Use timer_shutdown_sync() because the callback can rearm itself. | ||||
| CVE-2026-98193 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: libipw: reject TKIP frames without a full MIC libipw_michael_mic_verify() assumes that an skb contains an eight-byte Michael MIC. A short TKIP frame makes the unsigned payload length wrap, causing michael_mic() to read past the skb. Check that the MIC is present before verifying it, and use the existing MICHAEL_MIC_LEN constant for all MIC lengths in the verifier. | ||||