Export limit exceeded: 24077 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (24077 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98808 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 6.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: systemport: Fix buffer overflow in bcm_sysport_get_stats() When running on SYSTEMPORT Lite, certain statistics are unsupported and skipped during bcm_sysport_get_stats(). The variable 'j' tracks the compacted index into the destination data buffer, whereas 'i' iterates over all elements in bcm_sysport_gstrings_stats. Because the buffer allocated by ethtool is sized only according to bcm_sysport_get_sset_count(), storing values at data[i] instead of data[j] writes past the allocated array bounds, leading to memory corruption. Fix this by writing to data[j] instead of data[i]. | ||||
| CVE-2026-106110 | 1 Sixlabors | 1 Imagesharp | 2026-10-24 | 7.5 High |
| ImageSharp is a 2D graphics library. From 2.0.0 until 4.1.2, the TIFF CCITT Group 3 encoder allocates an undersized compressed-data buffer for narrow 1-bit images. TiffCcittCompressor.Initialize does not reserve enough space for the row data and T4 end-of-line codes, and T4BitCompressor.CompressStrip reaches unchecked writes when TiffCompression.CcittGroup3Fax is selected directly or inherited from decoded TIFF metadata. An attacker-controlled encode or decode-and-re-encode flow can write beyond the logical output span, corrupt process memory, and terminate the process. This issue is fixed in version 4.1.2. | ||||
| CVE-2026-106112 | 1 Sixlabors | 1 Imagesharp | 2026-10-24 | 7.5 High |
| ImageSharp is a 2D graphics library. From 4.0.0 until 4.1.2, ICC LUT16 conversion accepts more than four output channels even though ClutCalculator.Calculate and LutEntryCalculator.CalculateLut store intermediate and output values in Vector4. When DecoderOptions.ColorProfileHandling is set to Convert, a malformed embedded profile can direct interpolation and output-LUT operations to write one float per declared channel beyond the four-float destination. This can corrupt memory and terminate the process; the default Preserve mode does not run ICC conversion. This issue is fixed in version 4.1.2. | ||||
| CVE-2026-106113 | 1 Sixlabors | 1 Imagesharp | 2026-10-24 | 7.5 High |
| ImageSharp is a 2D graphics library. From 2.0.0 until 4.1.2, decoding an attacker-supplied 32-bit floating-point TIFF as Image<HalfVector4> and applying HistogramEqualization can produce a non-finite or out-of-range luminance in ColorNumerics.GetBT709Luminance. GrayscaleLevelsRowOperation.Invoke uses the resulting value as an unchecked histogram offset, causing an unsafe out-of-range access and process termination. Adaptive Histogram Equalization and AutoLevel are not affected by this report. This issue is fixed in version 4.1.2. | ||||
| CVE-2026-106114 | 1 Sixlabors | 1 Imagesharp | 2026-10-24 | 5.3 Medium |
| ImageSharp is a 2D graphics library. From 1.0.0-beta0001 until 4.1.2, ICC CLUT parsing calculates allocation sizes from attacker-declared channel and grid dimensions before confirming that the profile contains the declared values. IccDataReader.ReadClutF32 can request a large float array, and earlier public IccProfile.Entries parsing paths can allocate a large jagged representation, from a short truncated profile. In version 4, automatic image conversion reaches the parser when DecoderOptions.ColorProfileHandling is Convert; the default Preserve mode avoids that conversion path. The demonstrated impact is memory pressure and input-validation failure, not unhandled process termination. This issue is fixed in version 4.1.2. | ||||
| CVE-2026-106115 | 1 Sixlabors | 1 Imagesharp | 2026-10-24 | 7.5 High |
| ImageSharp is a 2D graphics library. From 2.1.0 until 4.1.2, the TIFF CCITT Group 4 encoder allocates Width times rowsPerStrip bytes even though T6BitCompressor.CompressStrip can emit encoded row data and two 12-bit end-of-facsimile-block codes beyond that capacity. TiffCcittCompressor.WriteCode performs unchecked writes, and a decode-and-re-encode flow can inherit TiffCompression.CcittGroup4Fax and one-bit metadata from attacker-supplied input. The resulting out-of-bounds writes can corrupt memory and terminate the process. This issue is fixed in version 4.1.2. | ||||
| CVE-2026-110734 | 1 Godotengine | 1 Godot Engine | 2026-10-24 | 2.5 Low |
| Godot Engine through 4.7.2 has a heap out-of-bounds write in the Radiance HDR (.hdr) image decoder (modules/hdr/image_loader_hdr.cpp). The run-length decoding loop expands RLE instructions read from the file into a buffer sized from the image dimensions, without validating that an instruction's repeat/copy count fits the remaining capacity of the row buffer. A crafted .hdr file therefore writes attacker-supplied bytes past the end of the heap allocation, with the overflow length and content controlled by the file. The defect is reached automatically when the product imports a crafted .hdr (e.g., when opening a project containing one), and at runtime in exported projects that load untrusted .hdr images. NOTE: the Supplier's position is that the research has identified "no security issues" because the required attacker access is outside of the current Godot Engine threat model. | ||||
| CVE-2026-79886 | 1 Hpe | 1 Aos | 2026-10-24 | 8.2 High |
| An unauthenticated buffer overflow vulnerability exists in the PAPI protocol of AOS-8. Successful exploitation could allow an unauthenticated remote attacker to disrupt the availability of the affected service on the controller, with a limited impact to its integrity. | ||||
| CVE-2026-9814 | 1 Totolink | 1 X2000r | 2026-10-23 | 9.1 Critical |
| An OS command injection vulnerability exists in the boa formWizard newPass functionality of X2000R (version(s): TOTOLINK-X2000R-Gh-V1.0.0-B20250421.1327). A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability. | ||||
| CVE-2026-35499 | 1 Totolink | 1 X2000r | 2026-10-23 | 9.1 Critical |
| An os command injection vulnerability exists in the boa formWsc peerRptPin functionality of Totolink X2000R TOTOLINK-X2000R-Gh-V1.0.0-B20250421.1327. A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability. | ||||
| CVE-2026-10138 | 1 Totolink | 1 X2000r | 2026-10-23 | 9.1 Critical |
| A OS command injection vulnerability exists in the boa formUpload() functionality of X2000R (version(s): TOTOLINK-X2000R-Gh-V1.0.0-B20250421.1327). A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability. | ||||
| CVE-2026-10135 | 1 Totolink | 1 X2000r | 2026-10-23 | 9.1 Critical |
| A OS command injection vulnerability exists in the batchupg functionality of X2000R (version(s): TOTOLINK-X2000R-Gh-V1.0.0-B20250421.1327). A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability. | ||||
| CVE-2026-10131 | 1 Totolink | 1 X2000r | 2026-10-23 | 9.1 Critical |
| An OS command injection vulnerability exists in the boa formPasswordSetup functionality of X2000R (version(s): TOTOLINK-X2000R-Gh-V1.0.0-B20250421.1327). A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability. | ||||
| CVE-2026-79978 | 1 Zephyrproject | 1 Zephyr | 2026-10-23 | 3.6 Low |
| The RTIO streaming completion callback adxl345_process_fifo_samples_cb() in drivers/sensor/adi/adxl345/adxl345_stream.c clamps the amount of FIFO data it will report (read_len = MIN(fifo_bytes, buf_avail)) to the space actually returned by rtio_sqe_rx_buf(), but then queues one 6-byte bus read per hardware FIFO entry at consecutive offsets from read_buf, bounded by the device-reported entry count rather than by the clamp. When the allocated buffer is smaller than a full batch, the driver writes up to 186 bytes past the end of the allocation; a companion defect left data->fifo_total_bytes un-reset at batch start, so an aborted or errored chain could leave a stale write offset that pushes the next batch's writes out of bounds as well. A short buffer is an expected, first-class outcome of the RTIO allocator: rtio_block_pool_alloc() walks the requested size down one block at a time until a contiguous run is available, and the driver only demands sizeof(struct adxl345_fifo_data) + 6 bytes as its minimum. Any streaming configuration whose mempool block granularity is smaller than a full FIFO batch (204 bytes) — for example the sensor shell's RTIO_DEFINE_WITH_MEMPOOL(sensor_read_rtio, 8, 8, 32, 64, 4) used by sensor stream <dev> on fifo_wm incl, or the 16-byte-block streaming example in the documentation — takes this path whenever the pool is fragmented or the consuming thread falls behind. The out-of-bounds writes are performed by the I2C/SPI RTIO backend (DMA on many SoCs) into the shared RTIO block pool, corrupting neighbouring live buffers or, for a pool smaller than one batch, memory beyond the pool itself. The written bytes are accelerometer samples and the destination follows the allocation, so there is no controllable corruption primitive: the realistic impact is silent corruption of other RTIO consumers' data or a crash. Reaching it requires a board with an interrupt-wired ADXL345 built with CONFIG_ADXL345_STREAM, plus buffer-pool starvation, which a co-resident local workload can induce but which also occurs spontaneously under load; there is no network, USB or radio path to this code. | ||||
| CVE-2026-79982 | 1 Zephyrproject | 1 Zephyr | 2026-10-23 | 8.8 High |
| The Bluetooth HCI USB transport class of the new USB device stack, subsys/usb/device_next/class/bt_hci.c, copies every controller-to-host HCI packet into a USB transfer buffer before enqueuing it on an endpoint. bt_hci_tx_sync_in() allocated that buffer from bt_hci_ep_pool, a fixed pool whose slots are only USBD_MAX_BULK_MPS bytes (64 on full-speed-only builds), and then performed net_buf_add_mem(buf, bt_buf->data, bt_buf->len) with no length check. HCI event and ACL buffers are sized by CONFIG_BT_BUF_EVT_RX_SIZE and CONFIG_BT_BUF_ACL_RX_SIZE and can be far larger, so the copy runs past the end of the 64-byte slot into the adjacent slots and into whatever follows the statically allocated pool. The device runs the local Bluetooth controller in raw HCI mode (CONFIG_BT_HCI_RAW), so the oversized packets originate over the air. With the HCI buffer sizes recommended for full-featured controllers, an unauthenticated attacker within Bluetooth range can supply the overflowing bytes: a connected peer that negotiates Data Length Extension can send ACL fragments up to CONFIG_BT_CTLR_DATA_LENGTH_MAX bytes, and an attacker that merely broadcasts extended advertising data reaches the same path through LE Extended Advertising Report events, which the controller fragments only to CONFIG_BT_BUF_EVT_RX_SIZE. In the stock configuration the overflow is already reached without any radio traffic: the mandatory Read Supported Commands command-complete event is 70 bytes and overruns the 64-byte slot by six bytes on every host initialization. Because net_buf_add_mem() validates tailroom only through an assertion unless CONFIG_NET_BUF_HARDENING is enabled, builds with CONFIG_ASSERT=n — the usual production setting — silently corrupt memory adjacent to the USB buffer pool with attacker-chosen contents, which on a target without memory protection between subsystems can lead to arbitrary code execution. Builds with assertions enabled fail the assertion instead and panic, giving a remotely triggerable denial of service. The fix introduces a separate bt_hci_tx_pool sized to MAX(BT_BUF_ACL_RX_SIZE, BT_BUF_EVT_RX_SIZE) for the controller-to-host direction while leaving the host-to-device pool at the endpoint packet size, which is already bounds-checked during reassembly. | ||||
| CVE-2026-115586 | 1 Pypa | 1 Virtualenv | 2026-10-23 | 7.0 High |
| virtualenv is a tool for creating isolated virtual python environments. From 21.14.9 until 21.14.13, the bash bin/activate script can copy an attacker-controlled --prompt value into PS1 without escaping dollar signs or backticks when both promptvars and POSIX mode are disabled during activation. Re-enabling promptvars, running set -o posix, or starting an interactive child bash that inherits the exported PS1 can then expand command substitution in the stored VIRTUAL_ENV_PROMPT value and execute commands as the user who activates the environment. This issue is fixed in version 21.14.13. | ||||
| CVE-2026-78119 | 1 Zephyrproject | 1 Zephyr | 2026-10-23 | 6.3 Medium |
| The Nuvoton NPCX eSPI driver parses Target-Attached-Flash (TAF) requests in espi_taf_parse() (drivers/espi/espi_npcx.c), taking the 12-bit length field directly out of the request header in the FLASHRXBUF FIFO. For write and RPMC OP1 requests it copied DIV_ROUND_UP(len, 4) words into struct espi_taf_pckt.src, a fixed 16-word (64-byte) member of a static structure, without ever comparing the length against that buffer or against the negotiated eSPI receive payload size (rx-plsize, 64 bytes on all in-tree NPCX/NPCK SoCs). Both the loop counter and the word count were uint8_t, so the copy ran up to 255 iterations. An eSPI controller that emits a flash request whose header claims a payload larger than the negotiated maximum therefore drives up to 239 32-bit stores past the end of the structure — roughly 956 bytes of out-of-bounds write into .bss — from the eSPI flash receive interrupt handler, while the source reads walk past the end of the 18-word FLASHRXBUF register array into neighbouring eSPI registers. The same unvalidated length was then passed on to flash_write() in espi_taf_npcx_flash_write() with the 64-byte src buffer as source, reading up to 4 KB of adjacent controller SRAM into SPI flash at a host-chosen address, where the host can read it back. A related fixed-size stack buffer in taf_npcx_completion_handler() was overflowed by four bytes on the maximum-size completion path on SoCs whose tx-plsize is 64. The defect is reachable only from the eSPI host side, and only by a request that violates the negotiated payload size, so it requires host firmware or bus-level control rather than ordinary host software; a compliant maximum-length write fits the buffer exactly and is handled correctly. Because TAF exists specifically so that the embedded controller arbitrates host access to shared flash (espi_taf_check_read_protect() / espi_taf_check_write_protect()), corrupting controller memory from a host-supplied field crosses the trust boundary the feature asserts; consequences range from controller crash or hang to corruption of driver state that gates the flash protection regions. The fix widens the counters, rejects any request whose word count exceeds both ARRAY_SIZE(FLASHRXBUF) - NPCX_ESPI_FLASH_HEADER_ADDRESS_LEN and NPCX_TAF_RX_PAYLOAD_WORDS (derived from the devicetree rx-plsize), marks such packets with a new invalid_flag so espi_taf_work() answers them with an unsuccessful completion instead of processing them, bounds the transmit payload against FLASHTXBUF, and adds a default case for unsupported cycle types. Only configurations with CONFIG_ESPI_TAF enabled on an NPCX/NPCK target are affected; no in-tree board enables it by default. | ||||
| CVE-2026-91419 | 1 Oracle | 1 Http Server | 2026-10-23 | 7.8 High |
| Vulnerability in the Oracle HTTP Server product of Oracle Fusion Middleware (component: OSSL Module). The supported version that is affected is 12.2.1.4.0. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where Oracle HTTP Server executes to compromise Oracle HTTP Server. Successful attacks of this vulnerability can result in takeover of Oracle HTTP Server. CVSS 3.1 Base Score 7.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). | ||||
| CVE-2026-91415 | 1 Oracle | 5 Graalvm, Graalvm Enterprise Edition, Graalvm For Jdk and 2 more | 2026-10-23 | 7 High |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: 2D). Supported versions that are affected are Oracle Java SE: 8u503, 8u503-perf, 11.0.32.1, 17.0.20.1, 21.0.12.1, 25.0.4.1, 27; Oracle GraalVM for JDK: 17.0.20.1 and 21.0.12.1; Oracle GraalVM Enterprise Edition: 21.3.19.1.1. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition as well as unauthorized update, insert or delete access to some of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data and unauthorized read access to a subset of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 7.0 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:H). | ||||
| CVE-2026-111280 | 2 Davenardella, Snap7 Project | 2 Snap7, Snap7 | 2026-10-23 | 7.4 High |
| snap7 through 1.4.3 contains an out-of-bounds write vulnerability in TSnap7MicroClient::opReadArea() that allows malicious S7 peers to overflow client buffers via an unchecked DataLength field. Rogue or impersonated PLCs can return crafted ReadVar responses causing memcpy of up to 65535 bytes into caller buffers, crashing SCADA, HMI, or gateway processes and corrupting memory. | ||||