Export limit exceeded: 417672 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 107842 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (107842 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80637 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: synproxy: fix unaligned memory access in timestamp adjustment Use get_unaligned_be32() and put_unaligned_be32() to safely read and write the timestamp fields. This prevents performance degradation due to unaligned memory access or even a crash on strict alignment architectures. This follows the implementation of timestamp parsing in the networking stack at tcp_parse_options() and synproxy_parse_options(). | ||||
| CVE-2026-80631 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: lzo: reject compressed segment that overflows the compressed input lzo_decompress_bio() validates each on-disk segment length seg_len only against the workspace cbuf size, not against the compressed input size (compressed_len, the total folio bytes of the bio). A crafted extent can carry a segment whose seg_len passes the cbuf check but runs past the end of the bio, so copy_compressed_segment() walks off the last folio: get_current_folio() then returns the NULL folio from bio_next_folio(), and with CONFIG_BTRFS_ASSERT disabled (default) folio_size(NULL) faults. BUG: KASAN: null-ptr-deref in lzo_decompress_bio (fs/btrfs/lzo.c:383) Read of size 8 at addr 0000000000000000 by task kworker/u8:1/29 Workqueue: btrfs-endio simple_end_io_work kasan_report (mm/kasan/report.c:590) lzo_decompress_bio (fs/btrfs/lzo.c:383) end_bbio_compressed_read (fs/btrfs/compression.c:1065) btrfs_bio_end_io (fs/btrfs/bio.c:135) btrfs_check_read_bio (fs/btrfs/bio.c:180 fs/btrfs/bio.c:285) simple_end_io_work process_one_work worker_thread Reject any segment whose payload would extend beyond compressed_len before copying it, treating it as corruption like the other on-disk validation failures in this function. | ||||
| CVE-2026-80628 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: oss: Serialize readq reset state with q->lock snd_seq_oss_readq_clear() resets qlen, head, and tail without q->lock even though the normal reader and producer paths serialize the same ring state under that spinlock. A reset can therefore race snd_seq_oss_readq_free() or snd_seq_oss_readq_put_event() and leave stale records in the queue, drop freshly queued ones, or report the wrong readiness after wakeup. KCSAN reports a data race between snd_seq_oss_readq_clear() and snd_seq_oss_readq_free(). Take q->lock while clearing the ring and resetting input_time. Factor the enqueue logic into a caller-locked helper so snd_seq_oss_readq_put_timestamp() updates its suppression state under the same lock instead of racing the reset path. The buggy scenario involves two paths, with each column showing the order within that path: reset path: locked readq updater: 1. snd_seq_oss_reset() or 1. A reader or callback producer release reaches takes q->lock on the same queue. snd_seq_oss_readq_clear(). 2. snd_seq_oss_readq_clear() 2. The updater tests or modifies resets qlen, head, tail, qlen, head, and tail. and input_time. 3. snd_seq_oss_readq_clear() 3. The updater completes its wakes sleepers on read-modify-write sequence. q->midi_sleep. 4. Without q->lock, the reset 4. The resulting ring state drives can overlap the locked later reads and readiness. update. KCSAN reports: BUG: KCSAN: data-race in snd_seq_oss_readq_clear / snd_seq_oss_readq_free write to 0xffff8881069fe608 of 4 bytes by task 120516 on cpu 0: snd_seq_oss_readq_free+0x6c/0x80 snd_seq_oss_read+0xcb/0x250 odev_read+0x38/0x60 vfs_read+0xff/0x600 ksys_read+0xb4/0x140 __x64_sys_read+0x46/0x60 do_syscall_64+0xbb/0x2f0 entry_SYSCALL_64_after_hwframe+0x77/0x7f read to 0xffff8881069fe608 of 4 bytes by task 120517 on cpu 1: snd_seq_oss_readq_clear+0x1f/0x90 snd_seq_oss_reset+0xa7/0xf0 snd_seq_oss_ioctl+0x6f6/0x7e0 odev_ioctl+0x56/0xc0 __x64_sys_ioctl+0xd1/0x120 do_syscall_64+0xbb/0x2f0 entry_SYSCALL_64_after_hwframe+0x77/0x7f value changed: 0x00000001 -> 0x00000000 | ||||
| CVE-2026-80576 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: reject oversized IBs with per-ring packet limits On GFX rings, amdgpu_cs_p2_ib() passed user-supplied ib_bytes through to ib->length_dw without a limit, while ring_emit_ib() encodes length into packet fields. Oversized values can corrupt adjacent control bits and destabilize command submission. Add a per-ring IB packet size limit helper and reject command submissions exceeding the corresponding dword limit before IB allocation. Use the documented 20-bit limit for GFX/compute/SDMA/VPE, and apply the MM fallback limit for other ring types. (cherry picked from commit 7f48fa2cf62e3fa6c9c3870aa74988f773247e52) | ||||
| CVE-2026-80572 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: byd - synchronize timer deletion before freeing private data byd_disconnect() uses timer_delete() before freeing the driver's private data. This does not wait for a running byd_clear_touch() callback, which dereferences the private data and its psmouse pointer. A callback racing with disconnect can therefore access the private data after it has been freed. The timer can also still be re-armed by byd_process_byte() while the disconnect is in progress. Use timer_shutdown_sync() before freeing the private data: it waits for a running callback and turns any later re-arm attempt into a no-op. | ||||
| CVE-2026-80526 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: tas2562: Validate values for volume writes tas2562_volume_control_put() does not do any validation of the control value written by userspace, it uses it to look up a value in a fixed size array which can easily be overflowed and then writes whatever value it gets back to the device. Add validation that we are loading a value we have in the array. | ||||
| CVE-2026-74747 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: revalidate ihl to prevent out-of-bounds access While the outer IP header is already pulled into the skb head, we must be careful and revalidate the embedded headers after reading them from the skb frags to prevent out-of-bounds access. One such place reported by Sashiko is ip_vs_nat_icmp() where local process can change the ihl field and after skb_ensure_writable() we can see larger value which is a problem for the ip_send_check(cih) calls. Add check to drop the packet if the ihl field is changed. | ||||
| CVE-2026-74739 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_u32: skip hash tables in u32_bind_class() u32_walk() enumerates both struct tc_u_hnode and struct tc_u_knode through the walker callback. u32_bind_class() unconditionally casts the passed fh to tc_u_knode and accesses &n->res, so when fh is actually a tc_u_hnode, which has no tcf_result member, this results in a slab-out-of-bounds read of res->classid in tc_cls_bind_class(). The issue can be reproduced with the following commands: tc qdisc add dev lo root handle 1: hfsc tc class add dev lo parent 1: classid 1:1 hfsc sc rate 1000kbit tc filter add dev lo parent 1:1 protocol ip prio 1 u32 match u32 0 0 flowid 1:1 tc class add dev lo parent 1: classid 1:2 hfsc sc rate 2000kbit Fix this by skipping hash tables via the TC_U32_KEY(handle) check. | ||||
| CVE-2026-74733 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: gpio: pca953x: fix pca953x_irq_bus_sync_unlock regmap lock Locking is disabled in the regmap config as this driver uses its own lock. This means that all calls to regmap functions (read or write) must hold the i2c_lock. The function pca953x_irq_bus_sync_unlock() did not do this, and it was therefore possible that multiple threads could cause an incorrect register to be read/written. A previous patch partly fixed this, but only protected the write to the interrupt mask register, and not the read from the direction register. | ||||
| CVE-2026-74715 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix netns reference imbalance in conntrack kfuncs The opts argument of the BPF conntrack kfuncs can point to a shared map value. __bpf_nf_ct_lookup() and __bpf_nf_ct_alloc_entry() read opts->netns_id separately when acquiring and releasing the network namespace reference. The reference imbalance can occur as follows: CPU 0 CPU 1 read opts->netns_id (-1) skip get_net_ns_by_id() write opts->netns_id (id) read opts->netns_id (id) put_net(net) /* no matching get */ The reverse transition leaks the reference. Repeating the unmatched put can destroy a live namespace and crash later users. The kernel reported: Oops: general protection fault, probably for non-canonical address KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef] RIP: 0010:bpf_prog_test_run_xdp+0x52c/0x1700 Call Trace: __sys_bpf+0x1662/0x50c0 __x64_sys_bpf+0x73/0xb0 do_syscall_64+0xf9/0x540 entry_SYSCALL_64_after_hwframe+0x77/0x7f Kernel panic - not syncing: Fatal exception Snapshot every input field of opts with READ_ONCE() before validating or using it. The netns_id snapshot keeps the namespace get/put pair balanced, while the other snapshots keep the remaining options from changing partway through an invocation. The individual reads can still observe an inconsistent combination during a concurrent update, but each selected field value remains stable for that invocation. | ||||
| CVE-2026-74713 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: vhost_iotlb: bound map allocation in add_range vhost_iotlb_add_range_ctx() only retires an old entry when the table has a non-zero limit, has exactly reached that limit and has VHOST_IOTLB_FLAG_RETIRE set. Non-retiring tables can keep allocating entries after reaching their configured limit. Existing vhost devices allocate their IOTLB with max_iotlb_entries from vhost.c, which defaults to 2048 and is tunable by module parameter. Use the caller-provided limit at the allocation point instead of adding a separate default in the common IOTLB helper, and reject non-positive values in vhost paths that can report an error. Other vhost IOTLB users should not create zero-limit tables when entries can be populated from userspace or guest-controlled requests. Add caller-side max_iotlb_entries parameters for mlx5 vDPA, VDUSE and vhost-vDPA. Reject non-positive VDUSE and vhost-vDPA values, and require at least two entries for vdpa_sim and mlx5 vDPA paths that install full-range mappings, since those mappings are split into two IOTLB entries. Handle full-range mappings in the common helper by checking that the IOTLB can hold both split entries before inserting the first half. This avoids returning an error after leaving a half mapping behind. When the table is full, keep the existing retire behavior for retiring tables and return -ENOSPC for non-retiring tables. Reuse the retired map node instead of freeing it and allocating a replacement, so a stream of IOTLB updates cannot keep forcing GFP_ATOMIC allocations after the table has reached its limit. If a zero-limit IOTLB still reaches the common helper, treat it as a configuration error and return -EINVAL. I found this bug myself, though the patch was written with AI assistance. | ||||
| CVE-2026-74700 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: Always acquire rtnl_lock when destroying locked classifiers Another challenge with unlocked filters. There is a short window in tc_new_tfilter where a tcf_proto can be found and briefly referenced by a totally unrelated, unlocked classifier's request and cause a race. Feng created a poc which created this race with two threads, one creating a u32 filter and other a flower filter in the same chain/prio: 1. Both threads enter tc_new_tfilter, both find the chain empty, both drop filter_chain_lock 2. u32 finishes tcf_proto_create("u32") first, calls tcf_chain_tp_insert_unique() -> inserts u32_tp into the chain 3. flower finishes tcf_proto_create("flower") later, calls tcf_chain_tp_insert_unique() -> tcf_chain_tp_find() now sees u32_tp already there, takes a reference on it, destroys flower's own tp_new and returns u32_tp to the caller. Flower then hits the kind mismatch check (because it requested for kind "flower" but tp->ops->kind is "u32") and goes through the errout path which calls tcf_proto_put() on u32_tp. If the u32 thread has already gone through its own errout (its change() call failed on the PoC's empty options) and dropped its create and insert refs, flower's put is the last one and drops u32_tp's refcnt to zero. At this point tp->ops->destroy() runs in a context that never took rtnl_lock. When that happens, it might cause a UAF like the following (illustrated by the PoC): [ +0.000710] BUG: KASAN: slab-use-after-free in u32_init (net/sched/cls_u32.c:393) [ +0.000281] Read of size 8 at addr ffff888120022f00 by task poc_feng_xue/524 Call Trace: u32_init (net/sched/cls_u32.c:393) tc_new_tfilter (net/sched/cls_api.c:2378) Allocated by task 526: u32_init (net/sched/cls_u32.c:378) tc_new_tfilter (net/sched/cls_api.c:2378) Freed by task 522: kfree u32_destroy (net/sched/cls_u32.c:662) tcf_proto_destroy (net/sched/cls_api.c:446) tcf_proto_put (net/sched/cls_api.c:459) tc_new_tfilter (net/sched/cls_api.c:2459) Fix this by having tcf_proto_destroy() take rtnl_lock around tp->ops->destroy() for locked classifiers whenever rtnl is not held. To explain why I used a temp variable "not_lockless" I'd like to point to a semi-related note on rtnl_held vs TCF_PROTO_OPS_DOIT_UNLOCKED (adding here for future cleanup if deemed necessary): The rtnl_held parameter and the TCF_PROTO_OPS_DOIT_UNLOCKED flag are redundant sources of truth for whether rtnl_lock is held. Among the nine classifier destroy(..rtnl_held..) callbacks, only flower consults the rtnl_held parameter which it propagates to tc_setup_cb_destroy() and tc_setup_cb_call(). The other eight (u32, flow, bpf, cgroup, route, basic, fw, mall) ignore it entirely;-> those that call tc_setup_cb_destroy() (u32, bpf, mall) hardcode true always instead of forwarding the parameter. A future cleanup should remove the rtnl_held parameter from the destroy callback signature entirely and have callers rely solely on their knowledge whether they are running in an unlocked context. | ||||
| CVE-2026-74695 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_flow_table: drop existing skb dst before skb_dst_set_noref() Incoming skbs passing through netfilter flowtable offload hooks (or XFRM offload path) might already carry a ref-counted dst_entry assigned during earlier RX or routing steps. Calling skb_dst_set_noref() when skb already holds a ref-counted dst overwrites skb->_skb_refdst, leaking the previous dst_entry reference count and triggering a DEBUG_NET_WARN_ON_ONCE assertion in skb_dst_check_unset(): WARNING: at skb_dst_check_unset include/linux/skbuff.h:1170 WARNING: at skb_dst_set_noref include/linux/skbuff.h:1234 WARNING: at nf_flow_offload_ip_hook+0xf6c/0x2b60 net/netfilter/nf_flow_table_ip.c:864 Drop any existing dst_entry reference with skb_dst_drop(skb) before setting the non-referenced flowtable destination. | ||||
| CVE-2026-74690 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/ism: Fix UAF of sba and ieq during ism_dev_exit() A ism interrupt handler can be active in parallel with ism_dev_exit(), accessing freed data structures. No new interrupts will be generated after unregister_ieq(). Drain ongoing interrupt handlers by free_irq(), before freeing ism data structures. | ||||
| CVE-2026-74687 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: watchdog: at91sam9_wdt: prevent timer rearm during teardown at91_ping() rearms the watchdog timer from its callback. timer_delete() neither waits for a running callback nor prevents it from rearming the timer, so probe failure or driver removal can leave the timer accessing the devm-allocated at91wdt after it has been freed. Use timer_shutdown_sync() on both teardown paths. It waits for a running callback and rejects any attempt by the callback to rearm the timer. | ||||
| CVE-2026-74684 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net: tap: set skb->dev before parsing virtio net header in tap_get_user_xdp() The commit 4f61f133f354 ("net: tap: NULL pointer derefence in dev_parse_header_protocol when skb->dev is null") fixed a crash in tap_get_user() by assigning skb->dev before calling tun_vnet_hdr_to_skb(). This is required because virtio_net_hdr_to_skb() may invoke dev_parse_header_protocol(), which dereferences skb->dev. Without the assignment, a NULL pointer dereference can occur. However, tap_get_user_xdp() still parses the virtio-net header before assigning skb->dev. When the vhost TX path passes an XDP buffer containing a GSO virtio-net header but the protocol is set to zero on purpose, tun_vnet_hdr_to_skb() can reach dev_parse_header_protocol() while skb->dev is still NULL, resulting in a crash. Fix this by looking up the tap device and assigning skb->dev before calling tun_vnet_hdr_to_skb(), matching the ordering already used in tap_get_user(). Preserve the existing RCU read-side critical section across dev_queue_xmit(). | ||||
| CVE-2026-74672 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: acquire init_mm lock on huge vmap to avoid ptdump UAF Patch series "mm: fix UAF caused by race between ptdump and vmap pgtable freeing", v6. Kernel page table walkers fall into two broad categories - those ranges where no exclusion is required via walk_kernel_page_table_range_lockless() and those where exclusion is required via walk_kernel_page_table_range() or walk_page_range_debug(). The former category is used only by arm64 arch code operating on ranges it both wholly owns and does not concurrently write. The latter category consists of kernel page table walkers operating on ranges that are wholly owned (but which need exclusion against concurrent writers). The lock used for exclusion is the mmap lock, and for kernel ranges this is the mmap lock on init_mm. ptdump is a special case being both the only user of walk_page_range_debug(), and the only case in which it walks ranges it does not own. This presents a problem, as page tables may be freed under ptdump. And indeed there is a use-after-free bug in the kernel as a result, which this series addresses. vmap promotes page tables to huge leaf entries where possible, freeing the lower page table when it does. It does this with no meaningful locks held against concurrent ptdump walks. As a result, use-after-free can currently occur. This series addresses the issue by having the vmap huge promotion logic acquire the mmap read lock while both setting the huge page table entry and freeing the prior leaf page table. The ptdump code already acquires the mmap write lock, so by doing so we ensure that the ptdump walker only ever observes either the huge page table entry or the existing page table entry, and nothing is freed underneath it. A mitigation for this issue was already applied for arm64 in commit fa93b45fd397 ("arm64: Enable vmalloc-huge with ptdump"), which this series has to deal with carefully. This mitigation resolves the issue by acquiring the mmap read lock on init_mm on vmap page table free if a ptdump is in progress. However the fix in this series would cause a deadlock if we were to simply apply it for arm64 without also reverting the change. This is because vmap may acquire the read lock before ptdump attempts to acquire the write lock, which then gets queued, and rwsem starvation rules mean that the (unacknowledged) nested mmap read lock in the arm64 code would also block, meaning the original read lock is never released and thus deadlock. This series works around this by #ifndef CONFIG_ARM64'ing the mmap read lock in vmap logic, then partially reverting commit fa93b45fd397 ("arm64: Enable vmalloc-huge with ptdump"), keeping the enablement of huge vmap support, and removing the ifdeffery with the partial revert patch. There are related issues that are also addressed in this series: * x86 page attribute logic, specifically Change Page Attributes (CPA), implements a feature whereby huge ranges can be collapsed into huge leaf entries. This can similarly cause a UAF when done in parallel with a ptdump walk, so similarly acquire the init_mm mmap lock to avoid this. * The CPA logic allows concurrent page table manipulation and CPA collapse, meaning the former risks accessing a page table the latter frees. Fix this by acquiring mmap write lock on init_mm across the whole CPA collapse operation and read lock on the page table manipulation. * x86 and arm64 permit walks of non-kernel mm's (both allowing efi mm walks, and in x86's case arbitrary mm's), so we ensure kernel mappings remain stable by locking the init_mm as well as the mm being walked. The ordering of patches is established for both strict dependencies (the arm64 partial revert in particular has to be done after the vmap changes) and logical ones (the non-kernel mm fix only makes sense once the vmap/CPA fixes are in place). This patch (of 3): Currently there is a nasty ra ---truncated--- | ||||
| CVE-2026-74544 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_u32: validate offshift to prevent shift-out-of-bounds u32_change() copies the user-provided tc_u32_sel.offshift (unsigned char, 0-255) into the kernel knode object without bounds validation. When a packet later hits u32_classify() with TC_U32_VAROFFSET set, it evaluates `ntohs(offmask & *data) >> offshift` where the left operand is a 16-bit value promoted to a 32-bit int. Any offshift >= 32 is undefined behavior per C11 6.5.7p3, triggerable by an unprivileged user via user/network namespaces. UBSAN: shift-out-of-bounds in net/sched/cls_u32.c:236:43 shift exponent 32 is too large for 32-bit type int Fix this by rejecting offshift >= 16 during filter creation in u32_change(). | ||||
| CVE-2026-74537 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: hold sk properly in iso_conn_ready sk deref in iso_conn_ready must be done either under conn->lock, or holding a refcount, to avoid concurrent close. conn->sk is currently accessed without either: [Task 1] [Task 2] iso_sock_release iso_conn_ready sk = conn->sk lock_sock(sk) conn->sk = NULL lock_sock(sk) release_sock(sk) iso_sock_kill(sk) UAF on sk deref Fix possible UAF by holding sk refcount in iso_conn_ready(). Also recheck after lock_sock that the socket is still valid. Adjust locking so conn->sk is cleared only under lock_sock. | ||||
| CVE-2026-74527 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Block VFs from clobbering special CGX PKIND state PF and VF NIX LFs that share a CGX LMAC reuse the same hardware PKIND programming. When HiGig2 or EDSA parsing is enabled, a VF NIX LF alloc must not reset the LMAC RX PKIND or default TX parse config over the PF setup. Add cgx_get_pkind() and rvu_cgx_is_pkind_config_permitted() so VFs skip cgx_set_pkind(), rvu_npc_set_pkind(), and NIX_AF_LFX_TX_PARSE_CFG updates when the LMAC is using NPC_RX_HIGIG_PKIND or NPC_RX_EDSA_PKIND. | ||||