Export limit exceeded: 417674 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 107843 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (107843 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72423 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Guard conntrack opts error writes The conntrack lookup and allocation kfuncs take an opts pointer together with an opts__sz argument. The verifier checks only the memory range described by opts__sz, but the wrappers unconditionally write opts->error whenever the internal lookup or allocation helper returns an error. For an invalid size smaller than the end of opts->error, that write can land outside the verifier-checked range. Keep returning NULL for invalid arguments, but only report the error through opts->error when the supplied size includes the field. This preserves error reporting for the supported 12-byte and 16-byte layouts, and for other invalid sizes that still include opts->error. | ||||
| CVE-2026-72420 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: md/raid5: avoid R5_Overlap races while breaking stripe batches KCSAN report a race in break_stripe_batch_list() vs. raid5_make_request() on sh->dev[i].flags (plain word write vs. atomic bit op).. and .. one possible scenario is: CPU1 CPU2 break_stripe_batch_list(sh1) -> handle sh2 -> lock(sh2) -> sh2->batch_head = NULL -> unlock(sh2) -> test_and_clear_bit(R5_Overlap, sh2->dev[i].flags) -> wake_up_bit(sh2->dev[i].flags) raid5_make_request() -> add_all_stripe_bios(sh2) -> lock(sh2) -> stripe_bio_overlaps(sh2) returns true batch_head is NULL, so new bio overlap exist bio on sh2 -> true -> set_bit(R5_Overlap, sh2->dev[i].flags) -> unlock(sh2) -> wait_on_bit(sh2->dev[i].flags) -> sh2->dev[i].flags = sh1->dev[i].flags & ~R5_Overlap No wait_up_bit(), CPU2 could be wait_on_bit() forever... Fix by : - Expand the protect zone. - Use batch_head's device flag's snaphot when no held head_sh->stripe_lock. - Move sh/head_sh->batch_head = NULL to the end of protected zone , and , any concurrent add_all_stripe_bios() grabs sh->stripe_lock now either: - see batch_head != null, and , is rejected by stripe_bio_overlaps() under the lock (no R5_Overlap wait ) , or , - sees batch_head == NULL, only after dev[i].flags has already been set and the prior R5_Overlap waiters worken. KCSAN report: ================================================ BUG: KCSAN: data-race in break_stripe_batch_list / raid5_make_request write (marked) to 0xffff8e89c8117548 of 8 bytes by task 4042 on cpu 0: raid5_make_request+0xea0/0x2930 md_handle_request+0x4a2/0xa40 md_submit_bio+0x109/0x1a0 __submit_bio+0x2ec/0x390 submit_bio_noacct_nocheck+0x457/0x710 submit_bio_noacct+0x2a7/0xc20 submit_bio+0x56/0x250 blkdev_direct_IO+0x54c/0xda0 blkdev_write_iter+0x38f/0x570 aio_write+0x22b/0x490 io_submit_one+0xa51/0xf70 __x64_sys_io_submit+0xf7/0x220 x64_sys_call+0x1907/0x1c60 do_syscall_64+0x130/0x570 entry_SYSCALL_64_after_hwframe+0x76/0x7e read to 0xffff8e89c8117548 of 8 bytes by task 4010 on cpu 5: break_stripe_batch_list+0x249/0x480 handle_stripe_clean_event+0x720/0x9b0 handle_stripe+0x32fb/0x4500 handle_active_stripes.isra.0+0x6e0/0xa50 raid5d+0x7e0/0xba0 md_thread+0x15a/0x2d0 kthread+0x1e3/0x220 ret_from_fork+0x37a/0x410 ret_from_fork_asm+0x1a/0x30 value changed: 0x0000000000000019 -> 0x0000000000000099 --> R5_Overlap | ||||
| CVE-2026-72416 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_compat: ebtables emulation must reject non-bridge targets xtables targets return netfilter verdicts: NF_ACCEPT, NF_DROP, and so on. ebtables targets return incompatible verdicts: EBT_ACCEPT, EBT_DROP, ... We cannot allow fallback to NFPROTO_UNSPEC. ebtables doesn't permit this since 11ff7288beb2 ("netfilter: ebtables: reject non-bridge targets") but that commit missed the nft_compat layer. | ||||
| CVE-2026-72405 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: udp_tunnel: prevent double queueing in udp_tunnel_nic_device_sync Yue Sun reported a use-after-free and debugobjects warning in udp_tunnel_nic_device_sync_work() during concurrent device operations. The workqueue core clears the internal pending bit before invoking the worker. At that point, a concurrent thread can queue the work again. When the already running worker eventually clears the work_pending flag to 0, it mistakenly clears the flag for the newly queued instance. udp_tunnel_nic_unregister() then observes work_pending as 0 and frees the structure while the second work item is still active in the queue, leading to UAF. Fix this by returning early in udp_tunnel_nic_device_sync() if work_pending is already set, preventing redundant work queueing. | ||||
| CVE-2026-72404 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix UAF in cleanup_bearer() due to premature dst_cache_destroy() TIPC UDP media bearer teardown calls dst_cache_destroy() on its replicast caches before calling synchronize_net() to wait for concurrent RCU readers (transmitters) to finish: static void cleanup_bearer(struct work_struct *work) { ... list_for_each_entry_safe(rcast, tmp, &ub->rcast.list, list) { dst_cache_destroy(&rcast->dst_cache); list_del_rcu(&rcast->list); kfree_rcu(rcast, rcu); } ... dst_cache_destroy(&ub->rcast.dst_cache); udp_tunnel_sock_release(ub->sk); synchronize_net(); ... } This is highly buggy because dst_cache_destroy() immediately frees the per-CPU cache memory (free_percpu()) and releases the cached dst entries without any synchronization. If a concurrent transmitter (e.g., tipc_udp_xmit()) is running on another CPU under RCU protection, it can call dst_cache_get() concurrently, leading to: 1. Use-After-Free on the per-CPU cache pointer itself (crash). 2. "rcuref - imbalanced put()" warning if it attempts to release a dst that was concurrently released by dst_cache_destroy(). Furthermore, calling kfree(ub) immediately after synchronize_net() without closing the socket first (or waiting after closing it) leaves a window where a concurrent receiver (tipc_udp_recv()) could start after synchronize_net(), access ub, and suffer a UAF when kfree(ub) runs. To fix this, we must defer dst_cache_destroy() and kfree(ub) until after we have ensured that no more readers can see the bearer/socket and all existing readers have finished: 1. Defer rcast entry destruction (both dst_cache_destroy() and kfree()) to an RCU callback using call_rcu_hurry(). Using call_rcu_hurry() ensures the dst entries are released quickly. 2. Release the bearer socket using udp_tunnel_sock_release() (stops new receive readers). 3. Call synchronize_net() to wait for all outstanding RCU readers (both transmit and receive) to finish. 4. Now that it is safe, call dst_cache_destroy() on the main bearer cache, and free ub. Note: 3) and 4) can be changed later in net-next to also use call_rcu_hurry() and get rid of the synchronize_net() latency. | ||||
| CVE-2026-72383 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: fix addr_wq_timer race in sctp_free_addr_wq() sctp_free_addr_wq() previously removed addr_wq_timer using timer_delete() while holding addr_wq_lock. However, timer_delete() does not guarantee that a currently running timer handler has completed. This allows a race with sctp_addr_wq_timeout_handler(), where the handler may still run after addr_waitq has been freed, acquire addr_wq_lock, and access freed memory, leading to a use-after-free. Fix this by calling timer_shutdown_sync() before taking addr_wq_lock. This guarantees that any in-flight timer handler has finished and prevents the timer from being re-armed during teardown, making subsequent cleanup safe. | ||||
| CVE-2026-72382 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: reject undersized DACLs before parsing ACEs parse_dacl() limits the attacker-controlled ACE count by comparing it with the number of minimal ACEs that fit in the DACL size. The DACL size field is 16 bits, but the expression subtracts sizeof(struct smb_acl). Because sizeof() is unsigned, a DACL size smaller than the ACL header underflows to a large size_t. A malicious client can reach this with: SMB2_SET_INFO (InfoType=SMB2_O_INFO_SECURITY) -> smb2_set_info_sec() -> set_info_sec() -> parse_sec_desc() -> parse_dacl() -> init_acl_state(..., 0xffff) -> init_acl_state(..., 0xffff) -> kmalloc_objs(..., 0xffff) Thus a malformed security descriptor can make num_aces pass the guard and drive large temporary ACL state and pointer-array allocations. Reject DACLs smaller than struct smb_acl before doing the subtraction, so the ACE count check cannot be bypassed by the underflow. | ||||
| CVE-2026-72380 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xen/pvcalls: bound backend response req_id before indexing rsp[] pvcalls_front_event_handler() takes req_id directly from the backend-supplied ring response and uses it to index the fixed-size bedata->rsp[] array for a memcpy() and a store, with no range check. A malicious or buggy backend can set req_id past PVCALLS_NR_RSP_PER_RING and drive an out-of-bounds write past the bedata allocation. req_id was also declared int while the wire field rsp->req_id is u32, so a range check on the signed value alone is insufficient: a backend req_id of 0xffffffff becomes -1, passes a >= PVCALLS_NR_RSP_PER_RING test and indexes bedata->rsp[-1]. Declare req_id as u32 so a single bound covers both ends. A backend that sends an out-of-range req_id has violated the wire protocol, so rather than silently dropping the response, log once and stop trusting the backend: set bedata->disabled. The event handler then ignores further responses, and the request paths that wait for a response return -EIO instead of blocking forever. This mirrors the fatal-error handling xen-netback uses (xenvif_fatal_tx_err()). The pvcalls frontend currently trusts its backend, so this is not a classic-Xen security issue, but it matters for hardening PV frontends against malicious backends (confidential and disaggregated deployments). | ||||
| CVE-2026-72375 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: afs: Fix reinitialisation of the inode, in particular ->lock_work It seems that initalising afs_vnode::lock_work a single time in the slab's init function isn't sufficient for work_structs. This results in the DEBUG_OBJECTS debugging stuff producing a warning occasionally when running the generic/131 xfstest: ODEBUG: activate not available (active state 0) object: 0000000016d8760f object type: work_struct hint: afs_lock_work+0x0/0x220 WARNING: lib/debugobjects.c:629 at debug_print_object+0x4b/0x90, CPU#3: locktest/7695 ... CPU: 3 UID: 0 PID: 7695 Comm: locktest Tainted: G S 7.1.0-build3+ #2771 PREEMPT ... RIP: 0010:debug_print_object+0x65/0x90 ... Call Trace: <TASK> ? __pfx_afs_lock_work+0x10/0x10 debug_object_activate+0x122/0x170 insert_work+0x25/0x60 __queue_work+0x2e0/0x340 queue_delayed_work_on+0x48/0x70 afs_fl_release_private+0x57/0x70 locks_release_private+0x5c/0xa0 locks_free_lock+0xe/0x20 posix_lock_inode+0x55f/0x5b0 locks_lock_inode_wait+0x81/0x140 ? file_write_and_wait_range+0x50/0x70 afs_lock+0xcd/0x110 fcntl_setlk+0x10d/0x260 do_fcntl+0x24e/0x5b0 __do_sys_fcntl+0x6a/0x90 do_syscall_64+0x11e/0x310 entry_SYSCALL_64_after_hwframe+0x71/0x79 Fix this by reinitialising ->lock_work after allocating an inode. Also, flush ->lock_work when the inode is being evicted to make sure it's not still running. | ||||
| CVE-2026-72338 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_pedit: fix TOCTOU heap OOB write in tc offload There is a TOCTOU race condition in flower lockless approach between sizing a flow_rule buffer and filling it. zdi-disclosures@trendmicro.com reports: The cls_flower classifier operates with TCF_PROTO_OPS_DOIT_UNLOCKED (fl_change runs without RTNL), while RTM_NEWACTION holds RTNL, so the independent locking domains make the race reachable in practice. KASAN confirms: BUG: KASAN: slab-out-of-bounds in tcf_pedit_offload_act_setup+0x81b/0x930 Write of size 4 at addr ffff888001f27520 by task poc-toctou/312 The buggy address is located 0 bytes to the right of allocated 288-byte region [ffff888001f27400, ffff888001f27520) (cache kmalloc-512) Note: The result is a heap OOB write attacker-controlled content into the adjacent slab object (requires CAP_NET_ADMIN). The fix introduces reading tcfp_nkeys under act->tcfa_lock in all places using a new tcf_pedit_nkeys_locked() which replaces the old tcf_pedit_nkeys(). Additionally we close the remaining TOCTOU window between the sizing read and the fill reads by more careful accounting. Rather than silently truncating the key count, which leads to incorrect action semantics offloaded to hardware and secondary OOB writes if the remaining capacity is zero or consumed by prior actions, we enforce remaining capacity checks and return -ENOSPC if the required space exceeds the remaining capacity. | ||||
| CVE-2026-72254 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_fib: reject fib expression on the netdev egress hook A fib expression in a netdev egress base chain dereferences nft_in(pkt), NULL on the transmit path, causing a NULL pointer dereference at eval. nft_fib_validate() masks the hook with NF_INET_* values, but netdev hook numbers are a separate enum that aliases them (NF_NETDEV_EGRESS == NF_INET_LOCAL_IN), so an egress chain passes validation and then faults. Add nft_fib_netdev_validate() that limits each result/flag to the netdev hook where the device it reads exists: the input-device cases (OIF, OIFNAME, ADDRTYPE with F_IIF) to ingress, the output-device case (ADDRTYPE with F_OIF) to egress, ADDRTYPE with no device flag to both. Also restrict nft_fib_validate() to NFPROTO_IPV4/IPV6/INET so its NF_INET_* masks are not applied to another family's hooks. | ||||
| CVE-2026-72213 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix hugetlb cgroup rsvd charge/uncharge mismatch In alloc_hugetlb_folio(), a single h_cg pointer is used for both the rsvd and non-rsvd hugetlb cgroup charges. When map_chg is set, hugetlb_cgroup_charge_cgroup_rsvd() stores the charged cgroup in h_cg, but the immediately following hugetlb_cgroup_charge_cgroup() overwrites h_cg with the non-rsvd cgroup pointer. As a result, hugetlb_cgroup_commit_charge_rsvd() stores the wrong (non-rsvd) cgroup pointer into the folio's rsvd slot. When the folio is later freed, free_huge_folio() unconditionally calls both hugetlb_cgroup_uncharge_folio() and hugetlb_cgroup_uncharge_folio_rsvd(). The rsvd uncharge reads back the wrong cgroup from the folio and decrements a counter that was never charged for that cgroup, causing a page_counter underflow: page_counter underflow: -512 nr_pages=512 WARNING: mm/page_counter.c:61 at page_counter_cancel Fix this by introducing a separate h_cg_rsvd pointer exclusively for the rsvd charge path, keeping the rsvd and non-rsvd charges fully independent through their charge, commit, and error uncharge paths. | ||||
| CVE-2026-72203 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: skip extent mft records in writeback to prevent deadlock This patch fixes the ABBA deadlock between extent_lock and extent mrec_lock triggered by xfstests generic/113, that occurs since the commit 6994acf33bae ("ntfs: use base mft_no when looking up base inode for extent record"). Path A (inode writeback): VFS writeback -> ntfs_write_inode() -> __ntfs_write_inode() -> mutex_lock(&ni->extent_lock) -> mutex_lock(&tni->mrec_lock) Path B (MFT folio writeback): VFS writeback of $MFT dirty folios -> ntfs_mft_writepages() -> ntfs_write_mft_block() -> ntfs_may_write_mft_record() -> holds one extent mrec_lock from a previous iteration -> tries to acquire another base inode extent_lock By removing all extent_lock and extent mrec_lock acquisition from the MFT folio writeback path, the ABBA lock ordering is eliminated: Path A: __ntfs_write_inode(): extent_lock -> mrec_lock Path B (removed): ntfs_write_mft_block(): mrec_lock -> extent_lock Path B is always redundant for extent records because: 1. mark_mft_record_dirty(ext_ni) does NOT dirty the MFT folio. It only sets NInoDirty(ext_ni) and marks the base VFS inode dirty via __mark_inode_dirty(I_DIRTY_DATASYNC), which triggers Path A. Therefore, normal extent modifications never create a situation where the MFT folio is dirty and Path B is not scheduled. 2. The MFT folio only gets dirtied via ntfs_mft_mark_dirty() inside ntfs_mft_record_alloc(). But all identified callers in attrib.c (ntfs_attr_add, ntfs_attr_record_move_away, ntfs_attr_make_non_resident, ntfs_attr_record_resize) follow through with mark_mft_record_dirty(), which triggers Path A to write the complete record. 3. ntfs_evict_big_inode() calls ntfs_commit_inode() before freeing extent inodes, ensuring all dirty extents are flushed via Path A before the base inode leaves the icache. | ||||
| CVE-2026-72198 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: reject non-resident records for resident-only attributes The shared lookup-time attribute validator rejects non-resident $FILE_NAME and $VOLUME_NAME records because their formats require resident values and callers handle returned records as resident attributes. Other resident-only attribute types still pass through the generic non-resident mapping-pairs checks. That leaves real resident/non-resident union confusion paths. Inode load looks up $STANDARD_INFORMATION and then reads data.resident.value_offset without checking a->non_resident. ntfs_inode_sync_standard_information() does the same when updating the standard information value. ntfs_write_volume_flags() also looks up $VOLUME_INFORMATION and reads data.resident.value_offset directly. $INDEX_ROOT callers in dir.c and index.c depend on the same lookup contract before consuming the resident index root value. Reject non-resident records for all resident-only attribute types in the shared validator. Keep the existing $FILE_NAME and $VOLUME_NAME behavior, but factor it through a helper and extend it to $STANDARD_INFORMATION, $OBJECT_ID, $VOLUME_INFORMATION, $INDEX_ROOT, and $EA_INFORMATION. For $OBJECT_ID and $EA_INFORMATION this is contract hardening for resident-only formats; this patch only rejects the non-resident form and does not add new resident value validation for those types. | ||||
| CVE-2026-72162 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix UBSAN array-index-out-of-bounds in ocfs2_sum_rightmost_rec [BUG] On-disk corruption setting l_next_free_rec to 0 in an inode's embedded extent list triggers a UBSAN panic on the next write to that file. [CAUSE] ocfs2_sum_rightmost_rec() computes i = le16_to_cpu(el->l_next_free_rec) - 1 and accesses el->l_recs[i] without validating i. When l_next_free_rec is 0, i becomes -1; when l_next_free_rec exceeds l_count, i falls past the end of the array. Either case violates the __counted_by_le(l_count) annotation on l_recs[] and triggers UBSAN. [FIX] Validate the inode's embedded extent list when the inode is read, in ocfs2_validate_inode_block(): l_count must be non-zero and no larger than the inode block can hold, and l_next_free_rec must not exceed l_count. A corrupt list is rejected at read time, before the b-tree code can index l_recs[] out of bounds. | ||||
| CVE-2026-72144 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-laptop: fix missing cleanups in init error path dell_init() initializes several resources after dell_setup_rfkill(), including the optional touchpad LED, keyboard backlight LED, battery hook, debugfs directory and dell-laptop notifier. If a later LED or backlight registration fails, the error path only tears down the battery hook and rfkill resources. This leaves the notifier, debugfs directory, keyboard backlight LED and optional touchpad LED registered after dell_init() returns an error. Add the missing cleanup calls before tearing down rfkill. | ||||
| CVE-2026-72009 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: pmdomain: imx93-blk-ctrl: Extract PHY as shared domain for DSI/CSI The MIPI DSI and CSI domains share control bits for clock and reset, which can lead to incorrect behavior if one domain disables the shared resource while the other is still active. To fix the issue, introduce a shared MIPI PHY power domain to own the common resources and make DSI and CSI its subdomains. This ensures the shared bits are properly managed and not disabled while still in use. | ||||
| CVE-2026-68471 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ieee80211: validate MLE common info length ieee80211_mle_common_size() uses the first common-info octet as the common information length for all known MLE types. However, ieee80211_mle_size_ok() only validates that octet for Basic, Probe Request, and TDLS MLEs. Reconfiguration MLEs also skipped the length octet when calculating the minimum common size, and Priority Access MLEs skipped validation of the advertised common information length. Account for the Reconfiguration common-info length octet and validate the advertised common information length for all known MLE types. Keep unknown-type handling unchanged. [remove now misleading comment] | ||||
| CVE-2026-68453 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Fix buffer over-read in cca_cipher2protkey Add validation of both the actual key buffer size and token length fields in all the cca_check_sec*token() functions. Additionally check in cca_gencipherkey() for possible underflow with returned key size. The CCA token structures contain user-controlled len fields that were used in operations without proper validation against both the actual buffer size and minimum token structure size. An attacker could set this field larger than the actual buffer size, leading to reading beyond buffer boundaries. This may result in a kernel crash or exposure of memory via sending this as part of a request down to the crypto card. Also an attacker could have used a very small len value and thus enforce a buffer under-run which may produce similar effects as a over-read. So now a key must - key buf length must be at least sizeof the token struct - the key len field inside the token must fit into the range of sizeof key token struct ... key buf length | ||||
| CVE-2026-68448 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ovl: check access to copy_file_range source with src mounter creds Commit 5dae222a5ff0c ("vfs: allow copy_file_range to copy across devices") allowed filesystems that implement the copy_file_range() f_op to decide if they want to access cross-sb copy from/to the same fs type. The same commit added checks to verify same sb copy for filesystems that implement ->copy_file_range() and do not support cross-sb copy at the time, namely, to ceph, fuse and nfs. The two remaining fs which implement ->copy_file_range(), cifs and overlayfs started to support cross-sb copy from this time. While overlayfs does support cross-sb copy when the two underlying files are on the same base fs, the copy operation on the two real files from two different overalyfs filesystems is performed with the mounter creds of the destination overlayfs and the read permission access hook for the source file was called with the wrong creds. This could cause either deny of access to copy which would otherwise be allowed (e.g. with splice) or allow read access to file which would otherwise be denied. Fix the latter case by explicitly verifying read access to source file with the source overlayfs mounter creds. The former case remains a quirk of cross-sb overlayfs copy, but userspace could fall back to regular copy so no harm done. | ||||