Export limit exceeded: 11698 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (11698 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90427 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Don't fall back to a freed smmu after devm_krealloc() __tegra241_cmdqv_probe() uses devm_krealloc() to grow @smmu into the larger tegra241_cmdqv, which frees the original @smmu once it relocates. A failure after that returned NULL, and the caller then dereferenced the freed @smmu on its fallback path. Return an int and take @smmu by reference instead, then update *smmu to the reallocated pointer after devm_krealloc() succeeds, so the caller and its fallback path both use the live @smmu rather than the freed original. | ||||
| CVE-2026-90363 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: don't tear down KMS twice when KMS init fails When priv->kms_init() (mdp4_kms_init() / mdp5_kms_init()) fails partway through, both display drivers already tear their KMS state down via mdp4_destroy() / mdp5_kms_destroy() before returning the error. The common error path in msm_drm_init() then runs msm_drm_uninit() -> msm_drm_kms_uninit(), which tries to destroy the very same KMS a second time, which causes a use-after-free crash. Bring MDP4/MDP5 in line with the DPU driver whose dpu_kms_init() doesn't perform error cleanup on the failure. Let the common path own the cleanup, instead of freeing the KMS from their error paths. The crash trace for the reference: __lock_acquire from lock_acquire (kernel/locking/lockdep.c:5906 kernel/locking/lockdep.c:5863) lock_acquire from touch_wq_lockdep_map (kernel/workqueue.c:4094 (discriminator 1)) touch_wq_lockdep_map from __flush_workqueue (kernel/workqueue.c:4136) __flush_workqueue from msm_drm_kms_uninit (drivers/gpu/drm/msm/msm_kms.c:243 (discriminator 33)) msm_drm_kms_uninit from msm_drm_uninit (drivers/gpu/drm/msm/msm_drv.c:93) msm_drm_uninit from msm_drm_init (drivers/gpu/drm/msm/msm_drv.c:184) msm_drm_init from try_to_bring_up_aggregate_device (drivers/base/component.c:249 drivers/base/component.c:227) try_to_bring_up_aggregate_device from __component_add (drivers/base/component.c:269 drivers/base/component.c:748) __component_add from dsi_host_attach (drivers/gpu/drm/msm/dsi/dsi_host.c:1739) dsi_host_attach from mipi_dsi_attach (drivers/gpu/drm/drm_mipi_dsi.c:383) mipi_dsi_attach from sharp_nt_panel_probe (drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c:247) Patchwork: https://patchwork.freedesktop.org/patch/742068/ | ||||
| CVE-2026-90326 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: fix race between policy activation and blkg destruction When switching an IO scheduler on a block device, blkcg_activate_policy() allocates blkg_policy_data (pd) for all blkgs attached to the queue. However, blkcg_activate_policy() may race with concurrent blkcg deletion, leading to use-after-free and memory leak issues. The use-after-free occurs in the following race: T1 (blkcg_activate_policy): - Successfully allocates pd for blkg1 (loop0->queue, blkcgA) - Fails to allocate pd for blkg2 (loop0->queue, blkcgB) - Enters the enomem rollback path to release blkg1 resources T2 (blkcg deletion): - blkcgA is deleted concurrently - blkg1 is freed via blkg_free_workfn() - blkg1->pd is freed T1 (continued): - Rollback path accesses blkg1->pd->online after pd is freed - Triggers use-after-free In addition, blkg_free_workfn() frees pd before removing the blkg from q->blkg_list. This allows blkcg_activate_policy() to allocate a new pd for a blkg that is being destroyed, leaving the newly allocated pd unreachable when the blkg is finally freed. Fix these races by extending blkcg_mutex coverage to serialize blkcg_activate_policy() rollback and blkg destruction, ensuring pd lifecycle is synchronized with blkg list visibility. | ||||
| CVE-2026-90321 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate inline xattrs during inode block validation Patch series "ocfs2: validate xattr entry bounds", v7. This series validates OCFS2 xattr entry name/value bounds when xattr metadata is read and validated, before getxattr() or listxattr() can walk out-of-range entry arrays or offsets from corrupted metadata. This patch (of 2): ocfs2_validate_inode_block() verifies a dinode before OCFS2 users walk metadata from it, but inline xattr metadata is still checked only in operation-specific consumers. The existing ibody lookup helper validates inline header placement and entry count, but inode block validation does not reject entry name/value bounds. Add a flat xattr entry validator and call it from inode block validation for inline xattrs. Keep the operation paths on their existing header/count lookup checks; the full entry bounds check now runs when the inode block is validated at read time. Reject corrupted inline xattr metadata before ocfs2_xattr_ibody_get() or listxattr() can walk past the inline storage. Validation reproduced this kernel report: BUG: KASAN: use-after-free in ocfs2_xattr_find_entry+0x5a/0x170 Read of size 2 at addr ffff8881242a2000 by task python3/529 Call Trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 kasan_report+0xe0/0x110 ocfs2_xattr_find_entry+0x5a/0x170 ocfs2_xattr_get_nolock+0x20a/0x820 ocfs2_xattr_get+0x10c/0x1e0 __vfs_getxattr+0xe2/0x130 vfs_getxattr+0x185/0x1b0 | ||||
| CVE-2026-90291 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: module/dups: Fix use-after-free in kmod_dup_req lifetime handling The kmod dups code uses RCU to ensure that a kmod_dup_req instance is freed only after it is no longer referenced. When releasing an instance, the kmod_dup_request_delete() function removes the kmod_dup_req from the dup_kmod_reqs list, waits via synchronize_rcu() and finally frees it. However, this doesn't work correctly because parallel users referencing the instance in kmod_dup_request_exists_wait() don't enter an RCU read-side critical section. This can result in a use-after-free. The kmod_dup_request_exists_wait() function may need to hold a valid reference to a kmod_dup_req instance across a blocking wait until the corresponding modprobe command completes. This makes it unsuitable for RCU. Fix the issue by changing the lifecycle management of kmod_dup_req to use reference counting. | ||||
| CVE-2026-90260 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: don't clobber the extent buffer when zeroing it out On a zoned filesystem a freed-but-still-dirty tree block is written out as zeros (EXTENT_BUFFER_ZONED_ZEROOUT) only to keep the zone write pointer advancing. btree_csum_one_bio() implemented this by memzeroing the extent buffer's own folios before submission. That destroys the in-memory buffer while it may still be referenced. In particular btrfs_free_tree_block() can run on it afterwards and reads the header to add a delayed reference; once the header has been zeroed it frees bytenr 0 and corrupts the extent tree (the btrfs_header_bytenr(buf) != 0 ASSERT in btrfs_free_tree_block(), or an "unable to find ref" abort). It is flaky and reproduces under fsstress, e.g. generic/461 and generic/013. Write the zeros to disk from the shared zero page instead and leave the extent buffer content untouched, so any later reference - including the delayed reference from btrfs_free_tree_block() - still sees a valid header. end_bbio_meta_write() now clears writeback on the buffer's own folios, as the bio no longer carries them. | ||||
| CVE-2026-90256 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: use proto_lock for l2cap_data to fix l2cap_disconn_ind hci_conn::l2cap_data is accessed without locks in l2cap_disconn_ind via hci_conn_timeout (disc_work) -> hci_proto_disconn_ind -> l2cap_disconn_ind. This is UAF if the l2cap_conn is deleted concurrently. disc_work is disabled sync in hci_conn_del(), so we cannot take hci_dev_lock in disc_work. Fix by using proto_lock to guard l2cap_data, in addition to hdev->lock which is held in other access paths. | ||||
| CVE-2026-90240 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Flush context cache with correct SID when tearing down aliases domain_context_clear_one() and device_pasid_table_teardown() are both invoked once per DMA alias of a device. Each function locates the context entry using the bus/devfn pair provided by the pci_for_each_dma_alias() callback, then calls intel_context_flush_no_pasid(), which constructs a device-selective context-cache invalidation from info->bus and info->devfn (that is, always the requester ID of the device itself). As a result, for every alias other than the device’s own RID, the context entry that was just cleared in memory is never invalidated in the context cache. Hardware may continue using that stale cached entry. In the scalable-mode teardown path, intel_pasid_free_table() can then free the PASID directory still referenced by that stale entry, allowing the IOMMU to walk freed memory. Fix this by passing the source ID of the entry being torn down to intel_context_flush_no_pasid(), instead of deriving it from @info. | ||||
| CVE-2026-90030 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: clear forceRM when issuing EndTransfer The forceRM bit of the DEPCMD register controls the behavior of the EndTransfer command used to stop an active transfer. Older DWC3 programming guide revisions recommended setting forceRM=1 when issuing EndTransfer. Newer programming guide revisions recommend issuing EndTransfer with forceRM cleared. With forceRM=1 on DWC_usb31 v2.00a and v2.10a controllers, a transfer aborted through the ep_dequeue path was observed to remain active after EndTransfer completion. A subsequent StartTransfer issued on the same endpoint triggered writes associated with the aborted transfer. This resulted in an SMMU fault because the transfer buffer had already been unmapped during EndTransfer command-completion cleanup. Using forceRM=0 eliminates the issue. Although older DWC3 programming guide revisions recommended setting forceRM=1, no issues are known from using forceRM=0. Clear forceRM when issuing EndTransfer to provide consistent EndTransfer behavior and align with newer programming guide recommendations. | ||||
| CVE-2026-89913 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic-v3: take an LPI reference in vgic_v3_save_pending_tables vgic_v3_save_pending_tables() iterates dist->lpi_xa using xa_for_each() and dereferences the returned struct vgic_irq in the loop body without holding a reference on the LPI. The xarray iterator only provides temporary RCU coverage while looking up the current entry. That is not sufficient for this loop body, which reads fields from struct vgic_irq and performs guest memory accesses before the iteration completes. A concurrent path can trigger this race: the irqfd cached injection path (vgic_its_inject_cached_translation) obtains a transient LPI reference via vgic_its_check_cache() without holding kvm->lock, vcpu->mutex, config_lock, or its_lock. If guest ITS DISCARD then drops the cache and ITE references under its_lock, the transient inject reference may become the final one. When vgic_put_irq() drops it, the LPI is erased from lpi_xa and freed via kfree_rcu(). Meanwhile, vgic_v3_save_pending_tables() may still hold a stale pointer obtained from the xarray iterator and dereference it after the RCU grace period completes. Fix this by re-fetching each iterated LPI via vgic_get_irq(), which takes a stable reference, and dropping it with vgic_put_irq() on all paths. This matches the pattern already used by other lpi_xa iterators in the vgic ITS code. | ||||
| CVE-2026-74344 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Clear rb node linkage when freeing bpf_rb_root bpf_rb_root_free() detaches the root by copying the current rb_root_cached and then replacing the live root with RB_ROOT_CACHED. It then walks the copied root and drops each object contained in the tree. This leaves the rb node state intact while dropping the object. If the object is refcounted and survives the drop, its bpf_rb_node_kern still contains an owner pointer to the freed root and stale rb tree linkage. If a later bpf_rb_root allocation reuses the same address, bpf_rbtree_remove() can incorrectly pass the owner check and call rb_erase_cached() on a node whose rb pointers belong to the old tree. Mirror the list draining behavior by marking nodes as busy while the root is being detached, then clear the rb node and release the owner before dropping the containing object. This makes surviving nodes unowned and safe to reject from remove or accept for a later add. | ||||
| CVE-2026-72388 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Always use the IRQ-safe variant when acquiring the fence lock Since dma_fence objects can be shared with other subsystems, they may be accessed from hardirq context in those drivers, and we have to take that into account by also using the IRQ-safe variant when acquiring the lock. While at it, switch to the guard model. | ||||
| CVE-2026-72363 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix folio state after ENOMEM whilst under writeback iteration Fix the state of the current folio when ENOMEM occurs during writeback iteration. The folio needs to be redirtied and unlocked before the terminal writeback_iter() is invoked. | ||||
| CVE-2026-68393 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: extend conn_hash lookup critical sections Using RCU-protected pointers outside the critical sections without refcount is incorrect and may result to UAF. Extend critical section to cover both hci_conn_hash lookup and use of the returned conn. Add surrounding rcu_read_lock() also when return value is not used, in preparation for RCU lockdep requirement to hci_lookup_le_connect(). This avoids concurrent deletion of the conn before we are done dereferencing it. Also, make sure to hold hdev->lock when accessing hdev->accept_list. | ||||
| CVE-2026-68383 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/guc: Keep scheduler timeline name alive The scheduler keeps a pointer to the timeline name, but q->name is freed with the exec queue while scheduler fences can still reference it. Store the name in struct xe_guc_exec_queue so it shares the scheduler's RCU-deferred lifetime. (cherry picked from commit 41075f0eb5dcbd3b065d15f15ef7bbe9315188e8) | ||||
| CVE-2026-64523 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/handshake: Take a long-lived file reference at submit handshake_nl_accept_doit() needs the file pointer backing req->hr_sk->sk_socket to survive the window between handshake_req_next() and the subsequent FD_PREPARE() and get_file(). The submit-side sock_hold() does not provide that. sk_refcnt keeps struct sock alive, but struct socket is owned by sock->file: when the consumer fputs the last file reference, sock_release() tears the socket down regardless of any sock_hold. Add an hr_file pointer to struct handshake_req and acquire an explicit reference on sock->file during handshake_req_submit(). handshake_complete() and handshake_req_cancel() release the reference on the completion-bit-winning path. The submit error path must also release the file reference, but after rhashtable insertion a concurrent handshake_req_cancel() can discover the request and race the error path. Gate the error-path cleanup -- sk_destruct restoration, fput, and request destruction -- with test_and_set_bit(HANDSHAKE_F_REQ_COMPLETED), the same serialization handshake_complete() and handshake_req_cancel() already use. When cancel has already claimed ownership, the submit error path returns without touching the request; socket teardown handles final destruction. The accept-side dereferences are not yet retargeted; that change comes in the next patch. | ||||
| CVE-2026-64377 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: qcom-cpufreq-hw: Fix possible double free qcom_cpufreq.data is allocated with devm_kzalloc() in probe() as an array of per-domain data. qcom_cpufreq_hw_cpu_init() stores a pointer to one element of this array in policy->driver_data. qcom_cpufreq_hw_cpu_exit() currently calls kfree() on policy->driver_data. This is not valid because the memory is devm-managed. For the first domain, this can free the devm-managed allocation while the devres entry is still active, leading to a possible double free when the platform device is later detached. For other domains, the pointer may refer to an element inside the array rather than the allocation base. Remove the kfree(data) call and let devres release qcom_cpufreq.data. This issue was found by a static analysis tool I am developing. | ||||
| CVE-2026-64117 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: capture fast-RX rate before mesh reuses skb->cb ieee80211_invoke_fast_rx() reads RX status through IEEE80211_SKB_RXCB(skb), which aliases the same skb->cb storage that ieee80211_rx_mesh_data() reuses as IEEE80211_TX_INFO. In the unicast forward path, mesh_data does: info = IEEE80211_SKB_CB(fwd_skb); memset(info, 0, sizeof(*info)); on the same skb the caller still names via rx->skb, then either queues the skb for TX (success) or kfree_skb()'s it (no-route) before returning RX_QUEUED. The caller's RX_QUEUED arm then calls sta_stats_encode_rate(status) on memory that is either zeroed (success path) or freed (no-route path). The latter is KASAN slab-use-after-free in ieee80211_prepare_and_rx_handle. Fix by encoding the rate from status before invoking ieee80211_rx_mesh_data(), so the RX_QUEUED arm consumes a value captured while status was still backed by valid memory. | ||||
| CVE-2026-64068 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix missing locking around retry adding new subreqs Fix netfs_retry_read_subrequests() and netfs_retry_write_stream() to take the appropriate lock when adding extra subrequests into stream->subrequests. | ||||
| CVE-2026-64001 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: oss: Fix setup list UAF on proc write error snd_pcm_oss_proc_write() links a newly allocated setup entry into the OSS setup list before duplicating the task name. If the task-name allocation fails, the error path frees the already linked entry and leaves setup_list pointing at freed memory. A later OSS device open can then walk the stale list entry in snd_pcm_oss_look_for_setup() and dereference freed memory. Allocate the task name and initialize the setup entry before publishing the entry on setup_list. Also fetch the initial proc read iterator only after taking setup_mutex, so all setup_list traversal follows the same list lifetime rules. | ||||