Export limit exceeded: 420914 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (420914 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64579 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: policy: preallocate inexact bins before xfrm_hash_rebuild reinsert xfrm_hash_rebuild()'s first loop preallocates the bins/chains the reinsert loop needs, so the reinsert (after hlist_del_rcu()) cannot allocate or fail. But its guard is inverted: it skips policies with prefixlen < threshold and preallocates for the rest. prefixlen < threshold is exactly when policy_hash_bysel() returns NULL and the reinsert takes the allocating xfrm_policy_inexact_insert() path. So the loop preallocates for the exact policies (which never allocate) and skips the inexact ones, whose bin/node is then allocated GFP_ATOMIC during reinsert. On failure the error path only WARN_ONCE()s and continues, leaving a poisoned bydst node; the next rebuild's hlist_del_rcu() dereferences LIST_POISON2 and takes a GPF. Reachable under memory pressure, deterministic via failslab. Invert the guard so preallocation covers exactly the reinserted policies; the reinsert then allocates nothing and cannot fail. Crash: Oops: general protection fault, probably for non-canonical address 0xfbd59c0000000024: 0000 [#1] SMP KASAN NOPTI KASAN: maybe wild-memory-access in range [0xdead...] ... Workqueue: events xfrm_hash_rebuild RIP: 0010:xfrm_hash_rebuild+0x5b3/0x1190 RAX: dead000000000122 (LIST_POISON2 + offset) ... Call Trace: hlist_del_rcu (include/linux/rculist.h:599) xfrm_hash_rebuild (net/xfrm/xfrm_policy.c:1365) process_one_work (kernel/workqueue.c:3322) worker_thread (kernel/workqueue.c:3486) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) ... Kernel panic - not syncing: Fatal exception in interrupt | ||||
| CVE-2026-64572 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: fib: free fib_alias with kfree_rcu() on insert error path fib_table_insert() publishes new_fa into the leaf's fa_list with fib_insert_alias() before calling the fib entry notifiers. When a notifier fails, the error path removes new_fa with fib_remove_alias() (hlist_del_rcu) and frees it right away with kmem_cache_free(). fib_table_lookup() walks that list under rcu_read_lock() only, so a concurrent lookup that already reached new_fa keeps reading it after the free: BUG: KASAN: slab-use-after-free in fib_table_lookup (net/ipv4/fib_trie.c:1601) Read of size 1 at addr ffff88810676d4eb by task exploit/297 Call Trace: fib_table_lookup (net/ipv4/fib_trie.c:1601) ip_route_output_key_hash_rcu (net/ipv4/route.c:2814) ip_route_output_key_hash (net/ipv4/route.c:2705) __ip4_datagram_connect (net/ipv4/datagram.c:49) udp_connect (net/ipv4/udp.c:2144) __sys_connect (net/socket.c:2167) __x64_sys_connect (net/socket.c:2173) do_syscall_64 entry_SYSCALL_64_after_hwframe which belongs to the cache ip_fib_alias of size 56 Triggering the error path needs CAP_NET_ADMIN and a registered fib notifier that can reject a route; a netdevsim device whose IPv4 FIB resource is exhausted is enough. Free new_fa with alias_free_mem_rcu(), as fib_table_delete() already does for a fib_alias removed from the trie. | ||||
| CVE-2026-64571 | 1 Linux | 1 Linux Kernel | 2026-11-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: p54: validate RX frame length in p54_rx_eeprom_readback() p54_rx_eeprom_readback() copies the requested EEPROM slice out of a device-supplied readback frame without checking that the skb actually holds that many bytes. Commit da1b9a55ff11 ("wifi: p54: prevent buffer-overflow in p54_rx_eeprom_readback()") closed the destination overflow by copying a fixed priv->eeprom_slice_size (and rejecting a mismatched advertised len), but the source side is still unbounded: nothing verifies the frame is long enough to supply that many bytes. A malicious USB device can send a short frame whose advertised len matches priv->eeprom_slice_size while the payload is truncated. The equality check passes and memcpy() reads past the end of the skb, leaking adjacent heap: BUG: KASAN: slab-out-of-bounds in p54_rx (drivers/net/wireless/intersil/p54/txrx.c:507) Read of size 1016 at addr ffff88800f077114 by task swapper/0/0 Call Trace: <IRQ> ... __asan_memcpy (mm/kasan/shadow.c:105) p54_rx (drivers/net/wireless/intersil/p54/txrx.c:507) p54u_rx_cb (drivers/net/wireless/intersil/p54/p54usb.c:163) __usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1657) dummy_timer (drivers/usb/gadget/udc/dummy_hcd.c:2005) ... </IRQ> The buggy address belongs to the object at ffff88800f0770c0 which belongs to the cache skbuff_small_head of size 704 The buggy address is located 84 bytes inside of allocated 704-byte region [ffff88800f0770c0, ffff88800f077380) Check that the slice fits in the skb before copying. | ||||
| CVE-2026-64569 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mpls: fix NULL deref in mpls_valid_fib_dump_req() on CONFIG_INET=n On CONFIG_INET=n builds, mpls_valid_fib_dump_req() walks the parsed attribute table itself instead of calling ip_valid_fib_dump_req(). The RTA_OIF arm passes tb[RTA_OIF] to nla_get_u32() without checking it is present, so an RTM_GETROUTE dump for AF_MPLS with strict checking and no RTA_OIF hits a NULL dereference. RTM_GETROUTE is RTNL_KIND_GET, which rtnetlink_rcv_msg() permits without CAP_NET_ADMIN, so an unprivileged user can trigger it. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:mpls_valid_fib_dump_req (net/mpls/af_mpls.c:2189) Call Trace: mpls_dump_routes (net/mpls/af_mpls.c:2236) netlink_dump (net/netlink/af_netlink.c:2331) __netlink_dump_start (net/netlink/af_netlink.c:2446) rtnetlink_rcv_msg (net/core/rtnetlink.c:7033) netlink_rcv_skb (net/netlink/af_netlink.c:2556) netlink_unicast (net/netlink/af_netlink.c:1345) netlink_sendmsg (net/netlink/af_netlink.c:1900) __sock_sendmsg (net/socket.c:790) ____sys_sendmsg (net/socket.c:2684) ___sys_sendmsg (net/socket.c:2738) __sys_sendmsg (net/socket.c:2770) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Skip unset attributes, as ip_valid_fib_dump_req() does. | ||||
| CVE-2026-64553 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: psample: fix info leak in PSAMPLE_ATTR_DATA psample open codes nla_put() presumably to avoid wiping the data with 0s just to override it with packet data. This open coding is missing clearing the pad, however, each netlink attr is padded to 4B and data_len may not be divisible by 4B. | ||||
| CVE-2026-64549 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: bpa10x: avoid OOB read of revision string in bpa10x_setup() bpa10x_setup() sends the vendor command 0xfc0e and passes the response to bt_dev_info() and hci_set_fw_info() as a "%s" string starting at skb->data + 1, without checking the length: bt_dev_info(hdev, "%s", (char *)(skb->data + 1)); hci_set_fw_info(hdev, "%s", skb->data + 1); A device that returns a one-byte response (status only) leaves skb->data + 1 past the end of the data, and the %s walk reads adjacent slab memory until it meets a NUL. The same happens when the payload is not NUL-terminated within skb->len. The out-of-bounds bytes end up in the kernel log and the firmware-info debugfs file. Print the revision string with a bounded "%.*s" limited to skb->len - 1 instead. This keeps the string readable for well-behaved devices while never reading past the received data, and does not fail setup, so a device returning a short or unterminated response keeps working. | ||||
| CVE-2026-64544 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: asymmetric_keys - fix OOB read in pefile_digest_pe_contents pefile_digest_pe_contents() computes the trailing-data hash length as pelen - (hashed_bytes + certs_size). A crafted PE can make the addition exceed pelen, causing the unsigned subtraction to underflow to ~4 GiB. This is passed to crypto_shash_update() which reads out of bounds and panics on unmapped vmalloc guard pages. BUG: unable to handle page fault for address: ffffc900038d8000 Oops: Oops: 0000 [#1] SMP KASAN NOPTI RIP: 0010:sha256_blocks_generic (lib/crypto/sha256.c:152) Call Trace: <TASK> __sha256_update (lib/crypto/sha256.c:208) crypto_sha256_update (crypto/sha256.c:142) verify_pefile_signature (crypto/asymmetric_keys/verify_pefile.c:436) kexec_kernel_verify_pe_sig (kernel/kexec_file.c:151) __do_sys_kexec_file_load (kernel/kexec_file.c:406) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) </TASK> Kernel panic - not syncing: Fatal exception Validate that the addition does not overflow and the result does not exceed pelen before the subtraction. Return -ELIBBAD on failure. | ||||
| CVE-2026-64542 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: ndisc: fix NULL deref in accept_untracked_na() accept_untracked_na() re-fetches the inet6_dev with __in6_dev_get(dev) and dereferences idev->cnf.accept_untracked_na without a NULL check, even though its only caller ndisc_recv_na() already fetched and NULL-checked idev for the same device. Both reads of dev->ip6_ptr run in the same RCU read-side critical section, but a concurrent addrconf_ifdown() can clear dev->ip6_ptr between them: lowering the MTU below IPV6_MIN_MTU calls addrconf_ifdown() without the synchronize_net() that orders the unregister path, so the re-fetch returns NULL and oopses: BUG: KASAN: null-ptr-deref in ndisc_recv_na (net/ipv6/ndisc.c:974) Read of size 4 at addr 0000000000000364 Call Trace: <IRQ> ndisc_recv_na (net/ipv6/ndisc.c:974) icmpv6_rcv (net/ipv6/icmp.c:1193) ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:479) ip6_input_finish (net/ipv6/ip6_input.c:534) ip6_input (net/ipv6/ip6_input.c:545) ip6_mc_input (net/ipv6/ip6_input.c:635) ipv6_rcv (net/ipv6/ip6_input.c:351) </IRQ> It is reachable by an unprivileged user via a network namespace. Pass the caller's already validated idev instead of re-fetching it; the idev stays alive for the whole RCU critical section, so it is safe even after dev->ip6_ptr has been cleared. | ||||
| CVE-2026-64538 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix null-ptr-deref in fib6_nh_mtu_change(). fib6_nh_mtu_change() re-fetches idev via __in6_dev_get(arg->dev) and dereferences idev->cnf.mtu6 without a NULL check. addrconf_ifdown() clears dev->ip6_ptr with RCU_INIT_POINTER() after rt6_disable_ip() has released tb6_lock, so the RA-driven MTU walk can observe a NULL idev and oops. The caller rt6_mtu_change_route() guards its own __in6_dev_get(), but this re-fetch is unguarded; nexthop-backed routes survive addrconf_ifdown()'s flush, so the walk still reaches it after ip6_ptr is nulled. Return 0 when idev is NULL, matching rt6_mtu_change_route() and the fib6_mtu() fix in commit 5ad509c1fdad ("ipv6: Fix null-ptr-deref in fib6_mtu()."). Oops: general protection fault, ... KASAN: null-ptr-deref in range [0x00000000000002a8-0x00000000000002af] RIP: 0010:fib6_nh_mtu_change+0x203/0x990 rt6_mtu_change_route+0x141/0x1d0 __fib6_clean_all+0xd0/0x160 rt6_mtu_change+0xb4/0x100 ndisc_router_discovery+0x24b5/0x2cb0 icmpv6_rcv+0x12e9/0x1710 ipv6_rcv+0x39b/0x410 | ||||
| CVE-2026-64514 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: userfaultfd: gate must_wait writability check on pte_present() userfaultfd_must_wait() and userfaultfd_huge_must_wait() read the PTE without taking the page table lock and then apply pte_write() / huge_pte_write() to it. Those accessors decode bits from the present encoding only; on a swap or migration entry they read the offset bits that happen to share the same position and return an undefined result. The intent of the check is "is this fault still WP-blocked?". A non-marker swap entry means the page is in transit -- the userfault context the original fault delivered against is no longer the same, and the swap-in or migration completion path will re-deliver a fresh fault if userspace still needs to handle it. Worst case under the current code the garbage write bit says "wait", and the thread stays asleep until a UFFDIO_WAKE that may never arrive. Gate the writability check on pte_present() so the lockless re-check only inspects present-PTE bits when the entry is actually present. The non-present, non-marker case returns "don't wait" and lets the fault path retry. | ||||
| CVE-2026-64512 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: CPPC: Suppress UBSAN warning caused by field misuse The definition of reg->access_width changes depending on the reg->space_id type. Type ACPI_ADR_SPACE_PLATFORM_COMM uses access_width to indicate the PCC region, which can result in a UBSAN if the value is greater than 4. For example: UBSAN: shift-out-of-bounds in drivers/acpi/cppc_acpi.c:1090:9 shift exponent 32 is too large for 32-bit type 'int' CPU: 61 UID: 0 PID: 1220 Comm: (udev-worker) Not tainted 7.0.10-201.fc44.aarch64 #1 PREEMPT(lazy) Hardware name: To be filled by O.E.M. Call trace: ...(trimming) ubsan_epilogue+0x10/0x48 __ubsan_handle_shift_out_of_bounds+0xdc/0x1e0 cpc_write+0x4d0/0x670 cppc_set_perf+0x18c/0x490 cppc_cpufreq_cpu_init+0x1c8/0x380 [cppc_cpufreq] ... (trimming) Lets fix this by validating the region type, as well as whether access_width has a value. Then since we are returning bit_width directly for ACPI_ADR_SPACE_PLATFORM_COMM, drop the code correcting the size. | ||||
| CVE-2026-64508 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Support for hardening against JIT spraying The BPF JIT allocator packs many small programs into larger executable allocations and reuses space within those allocations as programs are loaded and freed. When fresh code is written into space that a previous program occupied, an indirect jump into the new program can reuse a branch prediction left behind by the old one. Flush the indirect branch predictors before reusing JIT memory so that indirect jumps into a newly written program don't reuse predictions from an old program that occupied the same space. Introduce bpf_arch_pred_flush_enabled static key and bpf_arch_pred_flush static call for flushing the branch predictors on JIT memory reuse. Architectures that need a flush, can update it to a predictor flush function. By default, its a NOP and does not emit any CALL. Allocations larger than a pack are not covered by this flush. That is safe because cBPF programs (the unprivileged attack surface) are bounded well below a pack size. Issue a warning if this assumption is ever violated while the flush is active. | ||||
| CVE-2026-64507 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/bugs: Enable IBPB flush on BPF JIT allocation Enable hardening against JIT spraying when Spectre-v2 mitigations are in use. Specifically, issue an IBPB flush on BPF JIT memory reuse. Skip enabling the IBPB flush if the BPF dispatcher is already using a retpoline sequence. This hardening applies only when BPF-JIT is in use. Guard the enabling under CONFIG_BPF_JIT so that bugs.c still builds with CONFIG_BPF_JIT=n. | ||||
| CVE-2026-64504 | 1 Linux | 1 Linux Kernel | 2026-11-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: accel: bmc150: clamp the device-reported FIFO frame count __bmc150_accel_fifo_flush() copies the number of samples the device reports in its hardware FIFO into an on-stack buffer u16 buffer[BMC150_ACCEL_FIFO_LENGTH * 3]; which is sized for at most BMC150_ACCEL_FIFO_LENGTH (32) samples. The frame count is read from the FIFO_STATUS register and only masked to its 7 valid bits: count = val & 0x7F; so it can be 0..127. The only other limit applied to it is the optional caller-supplied sample budget: if (samples && count > samples) count = samples; which does not constrain count on the flush-all path (samples == 0), and leaves it well above 32 whenever samples is larger. count samples are then transferred into buffer[]: bmc150_accel_fifo_transfer(data, (u8 *)buffer, count); bmc150_accel_fifo_transfer() reads count * 6 bytes through regmap, so a malfunctioning, malicious or counterfeit accelerometer (or an attacker tampering with the I2C/SPI bus) that reports up to 127 frames writes up to 762 bytes into the 192-byte buffer: a stack out-of-bounds write of up to 570 bytes that clobbers the stack canary, saved registers and the return address. Clamp count to BMC150_ACCEL_FIFO_LENGTH, the number of samples buffer[] is sized for, before the transfer, mirroring the watermark clamp already done in bmc150_accel_set_watermark(). A well-formed flush reports at most BMC150_ACCEL_FIFO_LENGTH frames, so legitimate devices are unaffected. | ||||
| CVE-2026-64503 | 1 Linux | 1 Linux Kernel | 2026-11-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: accel: kxsd9: fix runtime PM imbalance on write_raw() error kxsd9_write_raw() takes a runtime PM reference with pm_runtime_get_sync() but returns -EINVAL directly when a scale with a non-zero integer part is requested, skipping the matching pm_runtime_put_autosuspend(). This leaks a runtime PM usage-counter reference on every such write, after which the device can no longer autosuspend. Set the error code and fall through to the existing put instead of returning early. | ||||
| CVE-2026-64487 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: caiaq: fix out-of-bounds read in the Traktor Kontrol S4 input parser snd_usb_caiaq_tks4_dispatch() decodes the Traktor Kontrol S4 input stream in fixed 16-byte (TKS4_MSGBLOCK_SIZE) message blocks. On every iteration it advances buf and subtracts the block size while looping on "while (len)". len is urb->actual_length. That value is supplied by the device and is not guaranteed to be a multiple of 16. When a final short block leaves len between 1 and 15, the loop runs once more, reads up to buf[15], and then does "len -= TKS4_MSGBLOCK_SIZE". As len is unsigned this underflows to a huge value. The loop then keeps iterating and walking buf far past the end of the 512-byte ep4_in_buf, reading out of bounds until a bogus block id happens to be hit. Iterate only while a full message block is available. This stops the unsigned underflow and silently drops any trailing partial block, which carries no complete control value anyway. The sibling endpoint-4 parsers are not affected. The Traktor Kontrol X1 and Maschine arms in snd_usb_caiaq_ep4_reply_dispatch() floor urb->actual_length before dispatching. | ||||
| CVE-2026-64484 | 1 Linux | 1 Linux Kernel | 2026-11-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: es1938: check snd_ctl_new1() return value snd_ctl_new1() can return NULL when memory allocation fails. snd_es1938_mixer() does not check the return value before dereferencing the pointer, which can lead to a NULL pointer dereference. Add a NULL check after snd_ctl_new1() and return -ENOMEM if it fails. | ||||
| CVE-2026-64483 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: firewire: isight: bound the sample count to the packet payload isight_packet() takes the frame count from the device iso packet and checks it only against the device claimed iso length. count = be32_to_cpu(payload->sample_count); if (likely(count <= (length - 16) / 4)) isight_samples(isight, payload->samples, count); length is the iso header data_length. It can be up to 0xffff. So the gate allows a count up to about 16379. isight_samples() then copies count frames out of payload->samples into the PCM DMA buffer. payload->samples holds only 2 * MAX_FRAMES_PER_PACKET values. The device multiplexes two samples per frame. A count past MAX_FRAMES_PER_PACKET reads past the payload. A count past the buffer size writes past runtime->dma_area. The smallest PCM buffer is larger than MAX_FRAMES_PER_PACKET. Bounding the count to MAX_FRAMES_PER_PACKET keeps both the read and the write in range. A malicious or faulty Apple iSight on the FireWire bus reaches this during a normal capture. Add the MAX_FRAMES_PER_PACKET bound to the gate. | ||||
| CVE-2026-64479 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Fix uninitialised heap leak in snd_seq_event_dup() snd_seq_event_dup() copies an incoming event into a pool cell and, in the UMP-enabled build, clears the trailing cell->ump.raw.extra word that the memcpy() did not cover. The guard deciding whether to clear it compares the copied size against sizeof(cell->event): memcpy(&cell->ump, event, size); if (size < sizeof(cell->event)) cell->ump.raw.extra = 0; For a legacy (non-UMP) event, size == sizeof(struct snd_seq_event) == sizeof(cell->event), so the condition is false and the extra word keeps stale data. The cell pool is allocated with kvmalloc() (not zeroed) and cells are reused via a free list, so that word holds uninitialised heap or leftover event data. When such a cell is delivered to a UMP client (client->midi_version > 0) that set SNDRV_SEQ_FILTER_NO_CONVERT -- so the legacy event reaches it unconverted -- snd_seq_read() reads it out as the larger struct snd_seq_ump_event and copies the stale word to user space, a 4-byte kernel heap infoleak to an unprivileged /dev/snd/seq client. Compare against sizeof(cell->ump) instead, so the trailing word is zeroed for every event shorter than the UMP cell. | ||||
| CVE-2026-64478 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: avoid kobject path lookup in DualSense match The DualSense jack-detection input handler verifies that a matching input device belongs to the same physical controller by building kobject path strings for both the input device and the USB audio device, then comparing the path prefix. This was observed when a weak physical connection caused the controller to rapidly disconnect and reconnect. During that repeated hotplug, snd_dualsense_ih_match() can run while the controller's USB device is being disconnected. kobject_get_path() walks ancestor kobjects and dereferences their names; if the USB device kobject name is no longer valid, this can fault in strlen(): RIP: 0010:strlen+0x10/0x30 Call Trace: kobject_get_path+0x34/0x150 snd_dualsense_ih_match+0x49/0xd0 [snd_usb_audio] input_register_device+0x566/0x6a0 ps_probe+0xb89/0x1590 [hid_playstation] The same ownership check can be done without building kobject path strings. The input device is parented below the HID device, USB interface and USB device, so walking the input device parent chain and comparing against the mixer USB device preserves the check without dereferencing kobject names during disconnect. | ||||