Export limit exceeded: 108628 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (108628 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-19741 | 1 Zephyrproject | 1 Zephyr | 2026-11-02 | 7.5 High |
| Zephyr's OpenThread integration defined CONFIG_OPENTHREAD_JOINER_PSKD with default "J01NME" in modules/openthread/Kconfig.thread (previously subsys/net/l2/openthread/Kconfig, then subsys/net/l2/openthread/Kconfig.thread). J01NME is the example Joining Device Credential used throughout the public OpenThread and Thread commissioning documentation, including Zephyr's own samples/net/sockets/echo_client/README.rst, so it is not a secret. A firmware image built with CONFIG_OPENTHREAD_JOINER_AUTOSTART=y that never overrode the PSKd therefore shipped with a publicly known joining credential compiled in, with no build-time or run-time warning. The PSKd is the only value that authenticates Thread commissioning: joiner and commissioner run a DTLS-PSK handshake keyed on it, after which the commissioner supplies the full operational dataset. In ot_configure_instance() (modules/openthread/openthread.c), a device with no stored dataset calls otJoinerStart() with the configured PSKd, and ot_joiner_start_handler() calls otThreadSetEnabled() on success. An unauthenticated attacker within 802.15.4 radio range of an uncommissioned device (factory-fresh, after a factory reset, or after a settings erase) can run any stock Thread commissioner registered with J01NME, complete the handshake, and hand the device an attacker-controlled operational dataset. The device then joins and enables Thread on the attacker's mesh. The attacker becomes its router, seeing, dropping, injecting and spoofing all of the device's IPv6 traffic and impersonating the peers the application expects, while the device is cut off from the network it was meant to join and stays mis-provisioned until it is reset. Only application-layer security with independently provisioned credentials survives. Exposure is limited to builds that enable joiner autostart and leave the PSKd unset; the option is not enabled by default and no in-tree sample uses the vulnerable combination. The fix removes the default from CONFIG_OPENTHREAD_JOINER_PSKD and adds a BUILD_ASSERT() in modules/openthread/openthread.c, active only under CONFIG_OPENTHREAD_JOINER_AUTOSTART, that fails the build unless a 6-to-32-character PSKd is configured. Products should provision a per-device PSKd from factory data and call otJoinerStart() from the application rather than relying on a credential compiled identically into every unit. | ||||
| CVE-2026-115975 | 1 Cervantessec | 1 Cervantes | 2026-11-02 | 7.1 High |
| Broken access control in JiraController in Cervantes version v1.3-beta could allow an attacker to create, edit, or delete Jira tickets for vulnerabilities in other projects | ||||
| CVE-2026-106069 | 1 Nodejs | 1 Nodejs | 2026-11-02 | 7.4 High |
| A flaw in Node.js TLS hostname verification can cause a server certificate to be validated against a different IP address than the one the client connected to, when the host is a non-canonical IPv4 literal with a leading zero, such as `0127.0.0.1`. `tls.checkServerIdentity()` normalizes the host following the WHATWG URL rules, which read a leading-zero octet as octal (`0127.0.0.1` becomes `87.0.0.1`), while the connection is made through the operating system resolver, which on some platforms such as macOS reads it as decimal (`127.0.0.1`). A server at the connected address can then be authenticated with a certificate issued for another IP address. This vulnerability affects Node.js **26.x**, **24.x**, and **22.x**. | ||||
| CVE-2026-65874 | 1 Apache | 1 Fineract | 2026-11-02 | 8.8 High |
| This issue affects Apache Fineract versions up to and including 1.15.0. The Center read endpoint (GET /api/v1/centers) and the datatable entry read endpoints (GET /api/v1/datatables/{datatable}/{apptableId} and GET /api/v1/datatables/{datatable}/{apptableId}/{datatableId}) concatenate caller-supplied ordering parameters (orderBy, sortOrder, order) directly into the SQL ORDER BY clause. The existing regex-based input validation can be bypassed, allowing time-based blind SQL injection by any authenticated user with read access to centers or to the targeted datatable. Users are recommended to upgrade to 1.16.1 which fixes the issue. | ||||
| CVE-2026-92450 | 1 Kiloview | 1 E3 Firmware | 2026-11-02 | 7.5 High |
| The authentication framework used by affected Kiloview E3 NDI encoder firmware signs session JSON Web Tokens using an HMAC-SHA256 secret hardcoded as a static string within the firmware image, identical across all deployed devices. An attacker with access to the publicly distributed firmware can recover this secret and forge arbitrary session tokens, including administrative tokens, without valid credentials, enabling unauthenticated access to privileged device functions. | ||||
| CVE-2026-115416 | 1 Aws | 1 Amazon Athena | 2026-11-02 | 7.7 High |
| Incorrect authorization checks in Amazon Athena engine version 3 query processing could have allowed an authenticated user to read AWS account identifiers and SQL statement text query metadata from other AWS accounts. Query results, and data stored in Amazon S3 or other data sources, were not accessible through this issue. AWS remediated the issue on October 7, 2026. No customer action is required. | ||||
| CVE-2026-114648 | 1 Mongodb | 1 C# Driver | 2026-11-02 | 7.6 High |
| The MongoDB C# Driver does not neutralize dot and dollar characters in dictionary keys, field names and array-filter identifiers used in LINQ queries before placing them into the field paths it sends to the server. An application user whose input reaches these positions can redirect a query or update to fields the application did not name, which can expose other users' documents and widen updates beyond the intended data. Certain values can also write malformed fields that leave stored documents unreadable by the application until they are repaired. | ||||
| CVE-2026-111594 | 1 Intersystems | 1 Iris For Health | 2026-11-02 | 8.1 High |
| InterSystems IRIS for Health has TLS/SSL encryption turned off by default, which may enable an attacker to view transmitted data and use that data to log into the device. | ||||
| CVE-2026-120347 | 2 Dayrui, Xunruicms | 2 Xunruicms, Xunruicms | 2026-11-02 | 7.3 High |
| A vulnerability was determined in dayrui XunRuiCMS up to 4.7.4. Affected is the function View of the file dayrui/Fcms/Core/View.php of the component Member Module. Executing a manipulation of the argument catid can lead to sql injection. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized. This patch is called 9b6ea0cf9c6e8cdc9a5260c38b95da5fed4c4231. The affected component should be upgraded. | ||||
| CVE-2026-83771 | 1 Microsoft | 13 Windows 11 23h2, Windows 11 23h2, Windows 11 24h2 and 10 more | 2026-11-02 | 8.8 High |
| Use after free in Windows Camera Frame Server Monitor allows an unauthorized attacker to elevate privileges over an adjacent network. | ||||
| CVE-2026-83775 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-11-02 | 7 High |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Installer allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-83777 | 1 Microsoft | 23 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 20 more | 2026-11-02 | 8.8 High |
| Heap-based buffer overflow in Windows Bluetooth Service allows an unauthorized attacker to elevate privileges over an adjacent network. | ||||
| CVE-2026-83779 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-11-02 | 7.8 High |
| Heap-based buffer overflow in Windows Installer allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-83781 | 1 Microsoft | 13 Windows 11 23h2, Windows 11 23h2, Windows 11 24h2 and 10 more | 2026-11-02 | 7.8 High |
| Improper null termination in Windows Program Compatibility Assistant Service allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-83783 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-11-02 | 7.8 High |
| Heap-based buffer overflow in Windows Management Instrumentation allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-96280 | 2 Flatpak, Redhat | 5 Flatpak, Enterprise Linux, Enterprise Linux Eus and 2 more | 2026-11-02 | 7.5 High |
| The OCI delta stream parser read sizes as guint64 but passed them to GLib I/O and allocation functions expecting gsize (32 bits on 32-bit systems), causing undersized allocations while subsequent operations use the original 64-bit size, leading to heap buffer overflows. An attacker controlling an OCI registry can craft a delta stream that triggers this during flatpak install/update, potentially achieving code execution on 32-bit systems. | ||||
| CVE-2026-66570 | 2 Nickboss, Wordpress-extensions | 2 Wordpress File Upload, Wordpress File Upload | 2026-11-02 | 7.1 High |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Nickboss WordPress File Upload wp-file-upload allows Stored XSS.This issue affects WordPress File Upload: from n/a through 5.2.1. | ||||
| CVE-2026-72693 | 1 Redhat | 5 Enterprise Linux, Hardened Images, Hummingbird and 2 more | 2026-11-02 | 7.8 High |
| `openvt -u` is intended to identify the owner of the current VT and then execute `login` as that user from a privileged context. In the documented `kbrequest`/init usage, the ownership test in `authenticate_user()` relies on `stat("/proc/<pid>/fd/0")`. `stat()` on `/proc/<pid>/fd/0` follows the symlink to the underlying TTY device node. As a result, `buf.st_uid` reflects the owner of the TTY node rather than the owner of the process holding the file descriptor. If the TTY owner returns to `root` or the getty owner after logout while an unprivileged process still has `fd 0` attached to that TTY, the check can incorrectly treat that process as belonging to the privileged console owner. Once that check succeeds, the `-u` path executes a passwordless login as the selected user. In the documented `kbrequest`/init deployment using `openvt -us`, this can result in passwordless `login -f root` on the spawned VT. This report establishes that privilege escalation path for that documented deployment; it does not claim equivalent reachability for deployments that do not use `openvt -u` from a privileged `kbrequest`/init path. | ||||
| CVE-2026-58380 | 3 Gimp, Gnome, Redhat | 5 Gimp, Gimp, Enterprise Linux and 2 more | 2026-11-02 | 7.3 High |
| A flaw was found in GIMP's PNM file format parser. When parsing a specially crafted PNM file, the pnmscanner_gettoken() function writes a null terminator one byte past the end of a stack-allocated buffer due to an off-by-one error in the loop boundary check. This could lead to memory corruption, potentially resulting in denial of service or arbitrary code execution. | ||||
| CVE-2026-42169 | 2 Gimp, Redhat | 5 Gimp, Enterprise Linux, Enterprise Linux Eus and 2 more | 2026-11-02 | 7.3 High |
| A heap-buffer-overflow vulnerability exists in the APNG (Animated PNG) file loader of GIMP. This flaw occurs when the `fcTL` width exceeds the `IHDR` width, leading to pixel data being written past the end of a heap allocation. Additionally, a heap-based buffer overflow exists in the DDS plug-in due to a BPP mismatch in the `load_layer()` function. Both vulnerabilities can be triggered by opening a specially crafted image file, potentially leading to code execution. | ||||